BS Computer Engineering · Computer Networks

Unit 5: Routing MCQs

50 solved multiple choice questions with answers and short explanations.

Q1. Which statement best describes Routing Concepts within Routing? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AIt is only a naming convention with no effect on system behavior.
  2. BIt guarantees correct operation without considering interfaces.
  3. CIt can be evaluated without knowing any constraints or operating conditions.
  4. DIt should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
Show answer
Answer: D. It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.Computer Networks → Routing → Routing Concepts: It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
Report a mistake

Q2. What is the primary engineering purpose of Routing Concepts? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AIt guarantees maximum performance regardless of power or cost.
  2. BIt supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
  3. CIts sole purpose is to maximize component count.
  4. DIt removes the need for requirements and verification.
Show answer
Answer: B. It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.Computer Networks → Routing → Routing Concepts: It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Report a mistake

Q3. A computer-engineering team is working with Routing Concepts. Which approach is most appropriate? Context: BS Computer Engineering / Computer Networks / Routing.

  1. ASelect components before defining requirements.
  2. BIgnore hardware-software interfaces because they are independent.
  3. CSkip verification once the design compiles or powers on.
  4. DDefine requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
Show answer
Answer: D. Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.Computer Networks → Routing → Routing Concepts: Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
Report a mistake

Q4. Which principle best supports correct analysis of Routing Concepts? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AChoose the result that looks familiar instead of validating the model.
  2. BUse an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
  3. CUse equations without checking their assumptions.
  4. DIgnore units and boundary conditions when calculations appear reasonable.
Show answer
Answer: B. Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.Computer Networks → Routing → Routing Concepts: Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Report a mistake

Q5. Which consideration is most important when designing a solution involving Routing Concepts? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AAlways maximize clock rate regardless of power and reliability.
  2. BIgnore interfaces if each component works independently.
  3. CChoose the most complex architecture even when requirements are simple.
  4. DBalance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
Show answer
Answer: D. Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.Computer Networks → Routing → Routing Concepts: Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
Report a mistake

Q6. How should an engineer verify work involving Routing Concepts? Context: BS Computer Engineering / Computer Networks / Routing.

  1. ATreat successful compilation as complete system validation.
  2. BTest against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
  3. CAssume simulation alone proves every physical implementation.
  4. DTest only the easiest operating condition.
Show answer
Answer: B. Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.Computer Networks → Routing → Routing Concepts: Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Report a mistake

Q7. When a problem involving Routing Concepts occurs, what should be done first? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AReplace several components before collecting evidence.
  2. BAssume the first suspected cause is correct.
  3. CIgnore measurements because troubleshooting should rely on intuition.
  4. DEstablish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
Show answer
Answer: D. Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.Computer Networks → Routing → Routing Concepts: Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
Report a mistake

Q8. Which evidence best supports a performance assessment involving Routing Concepts? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AAssume theoretical peak performance equals sustained system performance.
  2. BUse relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
  3. CUse an unrelated metric because it is easy to measure.
  4. DReport a single number without operating conditions.
Show answer
Answer: B. Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.Computer Networks → Routing → Routing Concepts: Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Report a mistake

Q9. Which trade-off should be considered when selecting an approach to Routing Concepts? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AOnly maximum speed matters in every design.
  2. BPower and cost never affect architecture decisions.
  3. CImplementation complexity has no effect on reliability or schedule.
  4. DBalance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
Show answer
Answer: D. Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.Computer Networks → Routing → Routing Concepts: Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
Report a mistake

Q10. Which example best represents disciplined engineering practice involving Routing Concepts? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AUse personal preference instead of requirements and evidence.
  2. BDocument requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
  3. CMake undocumented hardware changes during testing.
  4. DModify multiple interfaces simultaneously without isolation.
Show answer
Answer: B. Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.Computer Networks → Routing → Routing Concepts: Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Report a mistake

Q11. Which statement best describes Routing Principles within Routing? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AIt can be evaluated without knowing any constraints or operating conditions.
  2. BIt should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
  3. CIt is only a naming convention with no effect on system behavior.
  4. DIt guarantees correct operation without considering interfaces.
Show answer
Answer: B. It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.Computer Networks → Routing → Routing Principles: It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
Report a mistake

Q12. What is the primary engineering purpose of Routing Principles? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AIts sole purpose is to maximize component count.
  2. BIt removes the need for requirements and verification.
  3. CIt guarantees maximum performance regardless of power or cost.
  4. DIt supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Show answer
Answer: D. It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.Computer Networks → Routing → Routing Principles: It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Report a mistake

Q13. A computer-engineering team is working with Routing Principles. Which approach is most appropriate? Context: BS Computer Engineering / Computer Networks / Routing.

  1. ASkip verification once the design compiles or powers on.
  2. BDefine requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
  3. CSelect components before defining requirements.
  4. DIgnore hardware-software interfaces because they are independent.
Show answer
Answer: B. Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.Computer Networks → Routing → Routing Principles: Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
Report a mistake

Q14. Which principle best supports correct analysis of Routing Principles? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AUse equations without checking their assumptions.
  2. BIgnore units and boundary conditions when calculations appear reasonable.
  3. CChoose the result that looks familiar instead of validating the model.
  4. DUse an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Show answer
Answer: D. Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.Computer Networks → Routing → Routing Principles: Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Report a mistake

Q15. Which consideration is most important when designing a solution involving Routing Principles? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AChoose the most complex architecture even when requirements are simple.
  2. BBalance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
  3. CAlways maximize clock rate regardless of power and reliability.
  4. DIgnore interfaces if each component works independently.
Show answer
Answer: B. Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.Computer Networks → Routing → Routing Principles: Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
Report a mistake

Q16. How should an engineer verify work involving Routing Principles? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AAssume simulation alone proves every physical implementation.
  2. BTest only the easiest operating condition.
  3. CTreat successful compilation as complete system validation.
  4. DTest against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Show answer
Answer: D. Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.Computer Networks → Routing → Routing Principles: Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Report a mistake

Q17. When a problem involving Routing Principles occurs, what should be done first? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AIgnore measurements because troubleshooting should rely on intuition.
  2. BEstablish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
  3. CReplace several components before collecting evidence.
  4. DAssume the first suspected cause is correct.
Show answer
Answer: B. Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.Computer Networks → Routing → Routing Principles: Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
Report a mistake

Q18. Which evidence best supports a performance assessment involving Routing Principles? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AUse an unrelated metric because it is easy to measure.
  2. BReport a single number without operating conditions.
  3. CAssume theoretical peak performance equals sustained system performance.
  4. DUse relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Show answer
Answer: D. Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.Computer Networks → Routing → Routing Principles: Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Report a mistake

Q19. Which trade-off should be considered when selecting an approach to Routing Principles? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AImplementation complexity has no effect on reliability or schedule.
  2. BBalance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
  3. COnly maximum speed matters in every design.
  4. DPower and cost never affect architecture decisions.
Show answer
Answer: B. Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.Computer Networks → Routing → Routing Principles: Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
Report a mistake

Q20. Which example best represents disciplined engineering practice involving Routing Principles? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AMake undocumented hardware changes during testing.
  2. BModify multiple interfaces simultaneously without isolation.
  3. CUse personal preference instead of requirements and evidence.
  4. DDocument requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Show answer
Answer: D. Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.Computer Networks → Routing → Routing Principles: Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Report a mistake

Q21. Which statement best describes Routing Analysis within Routing? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AIt is only a naming convention with no effect on system behavior.
  2. BIt guarantees correct operation without considering interfaces.
  3. CIt can be evaluated without knowing any constraints or operating conditions.
  4. DIt should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
Show answer
Answer: D. It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.Computer Networks → Routing → Routing Analysis: It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
Report a mistake

Q22. What is the primary engineering purpose of Routing Analysis? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AIt guarantees maximum performance regardless of power or cost.
  2. BIt supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
  3. CIts sole purpose is to maximize component count.
  4. DIt removes the need for requirements and verification.
Show answer
Answer: B. It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.Computer Networks → Routing → Routing Analysis: It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Report a mistake

Q23. A computer-engineering team is working with Routing Analysis. Which approach is most appropriate? Context: BS Computer Engineering / Computer Networks / Routing.

  1. ASelect components before defining requirements.
  2. BIgnore hardware-software interfaces because they are independent.
  3. CSkip verification once the design compiles or powers on.
  4. DDefine requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
Show answer
Answer: D. Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.Computer Networks → Routing → Routing Analysis: Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
Report a mistake

Q24. Which principle best supports correct analysis of Routing Analysis? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AChoose the result that looks familiar instead of validating the model.
  2. BUse an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
  3. CUse equations without checking their assumptions.
  4. DIgnore units and boundary conditions when calculations appear reasonable.
Show answer
Answer: B. Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.Computer Networks → Routing → Routing Analysis: Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Report a mistake

Q25. Which consideration is most important when designing a solution involving Routing Analysis? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AAlways maximize clock rate regardless of power and reliability.
  2. BIgnore interfaces if each component works independently.
  3. CChoose the most complex architecture even when requirements are simple.
  4. DBalance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
Show answer
Answer: D. Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.Computer Networks → Routing → Routing Analysis: Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
Report a mistake

Q26. How should an engineer verify work involving Routing Analysis? Context: BS Computer Engineering / Computer Networks / Routing.

  1. ATreat successful compilation as complete system validation.
  2. BTest against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
  3. CAssume simulation alone proves every physical implementation.
  4. DTest only the easiest operating condition.
Show answer
Answer: B. Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.Computer Networks → Routing → Routing Analysis: Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Report a mistake

Q27. When a problem involving Routing Analysis occurs, what should be done first? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AReplace several components before collecting evidence.
  2. BAssume the first suspected cause is correct.
  3. CIgnore measurements because troubleshooting should rely on intuition.
  4. DEstablish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
Show answer
Answer: D. Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.Computer Networks → Routing → Routing Analysis: Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
Report a mistake

Q28. Which evidence best supports a performance assessment involving Routing Analysis? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AAssume theoretical peak performance equals sustained system performance.
  2. BUse relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
  3. CUse an unrelated metric because it is easy to measure.
  4. DReport a single number without operating conditions.
Show answer
Answer: B. Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.Computer Networks → Routing → Routing Analysis: Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Report a mistake

Q29. Which trade-off should be considered when selecting an approach to Routing Analysis? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AOnly maximum speed matters in every design.
  2. BPower and cost never affect architecture decisions.
  3. CImplementation complexity has no effect on reliability or schedule.
  4. DBalance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
Show answer
Answer: D. Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.Computer Networks → Routing → Routing Analysis: Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
Report a mistake

Q30. Which example best represents disciplined engineering practice involving Routing Analysis? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AUse personal preference instead of requirements and evidence.
  2. BDocument requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
  3. CMake undocumented hardware changes during testing.
  4. DModify multiple interfaces simultaneously without isolation.
Show answer
Answer: B. Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.Computer Networks → Routing → Routing Analysis: Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Report a mistake

Q31. Which statement best describes Routing Design within Routing? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AIt can be evaluated without knowing any constraints or operating conditions.
  2. BIt should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
  3. CIt is only a naming convention with no effect on system behavior.
  4. DIt guarantees correct operation without considering interfaces.
Show answer
Answer: B. It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.Computer Networks → Routing → Routing Design: It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
Report a mistake

Q32. What is the primary engineering purpose of Routing Design? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AIts sole purpose is to maximize component count.
  2. BIt removes the need for requirements and verification.
  3. CIt guarantees maximum performance regardless of power or cost.
  4. DIt supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Show answer
Answer: D. It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.Computer Networks → Routing → Routing Design: It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Report a mistake

Q33. A computer-engineering team is working with Routing Design. Which approach is most appropriate? Context: BS Computer Engineering / Computer Networks / Routing.

  1. ASkip verification once the design compiles or powers on.
  2. BDefine requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
  3. CSelect components before defining requirements.
  4. DIgnore hardware-software interfaces because they are independent.
Show answer
Answer: B. Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.Computer Networks → Routing → Routing Design: Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
Report a mistake

Q34. Which principle best supports correct analysis of Routing Design? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AUse equations without checking their assumptions.
  2. BIgnore units and boundary conditions when calculations appear reasonable.
  3. CChoose the result that looks familiar instead of validating the model.
  4. DUse an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Show answer
Answer: D. Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.Computer Networks → Routing → Routing Design: Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Report a mistake

Q35. Which consideration is most important when designing a solution involving Routing Design? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AChoose the most complex architecture even when requirements are simple.
  2. BBalance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
  3. CAlways maximize clock rate regardless of power and reliability.
  4. DIgnore interfaces if each component works independently.
Show answer
Answer: B. Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.Computer Networks → Routing → Routing Design: Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
Report a mistake

Q36. How should an engineer verify work involving Routing Design? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AAssume simulation alone proves every physical implementation.
  2. BTest only the easiest operating condition.
  3. CTreat successful compilation as complete system validation.
  4. DTest against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Show answer
Answer: D. Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.Computer Networks → Routing → Routing Design: Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Report a mistake

Q37. When a problem involving Routing Design occurs, what should be done first? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AIgnore measurements because troubleshooting should rely on intuition.
  2. BEstablish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
  3. CReplace several components before collecting evidence.
  4. DAssume the first suspected cause is correct.
Show answer
Answer: B. Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.Computer Networks → Routing → Routing Design: Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
Report a mistake

Q38. Which evidence best supports a performance assessment involving Routing Design? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AUse an unrelated metric because it is easy to measure.
  2. BReport a single number without operating conditions.
  3. CAssume theoretical peak performance equals sustained system performance.
  4. DUse relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Show answer
Answer: D. Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.Computer Networks → Routing → Routing Design: Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Report a mistake

Q39. Which trade-off should be considered when selecting an approach to Routing Design? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AImplementation complexity has no effect on reliability or schedule.
  2. BBalance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
  3. COnly maximum speed matters in every design.
  4. DPower and cost never affect architecture decisions.
Show answer
Answer: B. Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.Computer Networks → Routing → Routing Design: Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
Report a mistake

Q40. Which example best represents disciplined engineering practice involving Routing Design? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AMake undocumented hardware changes during testing.
  2. BModify multiple interfaces simultaneously without isolation.
  3. CUse personal preference instead of requirements and evidence.
  4. DDocument requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Show answer
Answer: D. Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.Computer Networks → Routing → Routing Design: Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Report a mistake

Q41. Which statement best describes Routing Applications within Routing? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AIt is only a naming convention with no effect on system behavior.
  2. BIt guarantees correct operation without considering interfaces.
  3. CIt can be evaluated without knowing any constraints or operating conditions.
  4. DIt should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
Show answer
Answer: D. It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.Computer Networks → Routing → Routing Applications: It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
Report a mistake

Q42. What is the primary engineering purpose of Routing Applications? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AIt guarantees maximum performance regardless of power or cost.
  2. BIt supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
  3. CIts sole purpose is to maximize component count.
  4. DIt removes the need for requirements and verification.
Show answer
Answer: B. It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.Computer Networks → Routing → Routing Applications: It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Report a mistake

Q43. A computer-engineering team is working with Routing Applications. Which approach is most appropriate? Context: BS Computer Engineering / Computer Networks / Routing.

  1. ASelect components before defining requirements.
  2. BIgnore hardware-software interfaces because they are independent.
  3. CSkip verification once the design compiles or powers on.
  4. DDefine requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
Show answer
Answer: D. Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.Computer Networks → Routing → Routing Applications: Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
Report a mistake

Q44. Which principle best supports correct analysis of Routing Applications? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AChoose the result that looks familiar instead of validating the model.
  2. BUse an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
  3. CUse equations without checking their assumptions.
  4. DIgnore units and boundary conditions when calculations appear reasonable.
Show answer
Answer: B. Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.Computer Networks → Routing → Routing Applications: Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Report a mistake

Q45. Which consideration is most important when designing a solution involving Routing Applications? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AAlways maximize clock rate regardless of power and reliability.
  2. BIgnore interfaces if each component works independently.
  3. CChoose the most complex architecture even when requirements are simple.
  4. DBalance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
Show answer
Answer: D. Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.Computer Networks → Routing → Routing Applications: Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
Report a mistake

Q46. How should an engineer verify work involving Routing Applications? Context: BS Computer Engineering / Computer Networks / Routing.

  1. ATreat successful compilation as complete system validation.
  2. BTest against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
  3. CAssume simulation alone proves every physical implementation.
  4. DTest only the easiest operating condition.
Show answer
Answer: B. Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.Computer Networks → Routing → Routing Applications: Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Report a mistake

Q47. When a problem involving Routing Applications occurs, what should be done first? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AReplace several components before collecting evidence.
  2. BAssume the first suspected cause is correct.
  3. CIgnore measurements because troubleshooting should rely on intuition.
  4. DEstablish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
Show answer
Answer: D. Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.Computer Networks → Routing → Routing Applications: Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
Report a mistake

Q48. Which evidence best supports a performance assessment involving Routing Applications? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AAssume theoretical peak performance equals sustained system performance.
  2. BUse relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
  3. CUse an unrelated metric because it is easy to measure.
  4. DReport a single number without operating conditions.
Show answer
Answer: B. Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.Computer Networks → Routing → Routing Applications: Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Report a mistake

Q49. Which trade-off should be considered when selecting an approach to Routing Applications? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AOnly maximum speed matters in every design.
  2. BPower and cost never affect architecture decisions.
  3. CImplementation complexity has no effect on reliability or schedule.
  4. DBalance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
Show answer
Answer: D. Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.Computer Networks → Routing → Routing Applications: Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
Report a mistake

Q50. Which example best represents disciplined engineering practice involving Routing Applications? Context: BS Computer Engineering / Computer Networks / Routing.

  1. AUse personal preference instead of requirements and evidence.
  2. BDocument requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
  3. CMake undocumented hardware changes during testing.
  4. DModify multiple interfaces simultaneously without isolation.
Show answer
Answer: B. Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.Computer Networks → Routing → Routing Applications: Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Report a mistake