BS Computer Engineering · Computer Organization & Architecture

Unit 10: Performance MCQs

50 solved multiple choice questions with answers and short explanations.

Q1. Which statement best describes Performance Concepts within Performance? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AIt can be evaluated without knowing any constraints or operating conditions.
  2. BIt should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
  3. CIt is only a naming convention with no effect on system behavior.
  4. DIt guarantees correct operation without considering interfaces.
Show answer
Answer: B. It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.Computer Organization & Architecture → Performance → Performance Concepts: It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
Report a mistake

Q2. What is the primary engineering purpose of Performance Concepts? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AIts sole purpose is to maximize component count.
  2. BIt removes the need for requirements and verification.
  3. CIt guarantees maximum performance regardless of power or cost.
  4. DIt supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Show answer
Answer: D. It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.Computer Organization & Architecture → Performance → Performance Concepts: It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Report a mistake

Q3. A computer-engineering team is working with Performance Concepts. Which approach is most appropriate? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. ASkip verification once the design compiles or powers on.
  2. BDefine requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
  3. CSelect components before defining requirements.
  4. DIgnore hardware-software interfaces because they are independent.
Show answer
Answer: B. Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.Computer Organization & Architecture → Performance → Performance Concepts: Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
Report a mistake

Q4. Which principle best supports correct analysis of Performance Concepts? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AUse equations without checking their assumptions.
  2. BIgnore units and boundary conditions when calculations appear reasonable.
  3. CChoose the result that looks familiar instead of validating the model.
  4. DUse an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Show answer
Answer: D. Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.Computer Organization & Architecture → Performance → Performance Concepts: Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Report a mistake

Q5. Which consideration is most important when designing a solution involving Performance Concepts? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AChoose the most complex architecture even when requirements are simple.
  2. BBalance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
  3. CAlways maximize clock rate regardless of power and reliability.
  4. DIgnore interfaces if each component works independently.
Show answer
Answer: B. Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.Computer Organization & Architecture → Performance → Performance Concepts: Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
Report a mistake

Q6. How should an engineer verify work involving Performance Concepts? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AAssume simulation alone proves every physical implementation.
  2. BTest only the easiest operating condition.
  3. CTreat successful compilation as complete system validation.
  4. DTest against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Show answer
Answer: D. Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.Computer Organization & Architecture → Performance → Performance Concepts: Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Report a mistake

Q7. When a problem involving Performance Concepts occurs, what should be done first? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AIgnore measurements because troubleshooting should rely on intuition.
  2. BEstablish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
  3. CReplace several components before collecting evidence.
  4. DAssume the first suspected cause is correct.
Show answer
Answer: B. Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.Computer Organization & Architecture → Performance → Performance Concepts: Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
Report a mistake

Q8. Which evidence best supports a performance assessment involving Performance Concepts? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AUse an unrelated metric because it is easy to measure.
  2. BReport a single number without operating conditions.
  3. CAssume theoretical peak performance equals sustained system performance.
  4. DUse relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Show answer
Answer: D. Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.Computer Organization & Architecture → Performance → Performance Concepts: Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Report a mistake

Q9. Which trade-off should be considered when selecting an approach to Performance Concepts? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AImplementation complexity has no effect on reliability or schedule.
  2. BBalance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
  3. COnly maximum speed matters in every design.
  4. DPower and cost never affect architecture decisions.
Show answer
Answer: B. Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.Computer Organization & Architecture → Performance → Performance Concepts: Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
Report a mistake

Q10. Which example best represents disciplined engineering practice involving Performance Concepts? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AMake undocumented hardware changes during testing.
  2. BModify multiple interfaces simultaneously without isolation.
  3. CUse personal preference instead of requirements and evidence.
  4. DDocument requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Show answer
Answer: D. Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.Computer Organization & Architecture → Performance → Performance Concepts: Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Report a mistake

Q11. Which statement best describes Performance Principles within Performance? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AIt is only a naming convention with no effect on system behavior.
  2. BIt guarantees correct operation without considering interfaces.
  3. CIt can be evaluated without knowing any constraints or operating conditions.
  4. DIt should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
Show answer
Answer: D. It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.Computer Organization & Architecture → Performance → Performance Principles: It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
Report a mistake

Q12. What is the primary engineering purpose of Performance Principles? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AIt guarantees maximum performance regardless of power or cost.
  2. BIt supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
  3. CIts sole purpose is to maximize component count.
  4. DIt removes the need for requirements and verification.
Show answer
Answer: B. It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.Computer Organization & Architecture → Performance → Performance Principles: It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Report a mistake

Q13. A computer-engineering team is working with Performance Principles. Which approach is most appropriate? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. ASelect components before defining requirements.
  2. BIgnore hardware-software interfaces because they are independent.
  3. CSkip verification once the design compiles or powers on.
  4. DDefine requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
Show answer
Answer: D. Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.Computer Organization & Architecture → Performance → Performance Principles: Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
Report a mistake

Q14. Which principle best supports correct analysis of Performance Principles? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AChoose the result that looks familiar instead of validating the model.
  2. BUse an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
  3. CUse equations without checking their assumptions.
  4. DIgnore units and boundary conditions when calculations appear reasonable.
Show answer
Answer: B. Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.Computer Organization & Architecture → Performance → Performance Principles: Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Report a mistake

Q15. Which consideration is most important when designing a solution involving Performance Principles? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AAlways maximize clock rate regardless of power and reliability.
  2. BIgnore interfaces if each component works independently.
  3. CChoose the most complex architecture even when requirements are simple.
  4. DBalance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
Show answer
Answer: D. Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.Computer Organization & Architecture → Performance → Performance Principles: Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
Report a mistake

Q16. How should an engineer verify work involving Performance Principles? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. ATreat successful compilation as complete system validation.
  2. BTest against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
  3. CAssume simulation alone proves every physical implementation.
  4. DTest only the easiest operating condition.
Show answer
Answer: B. Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.Computer Organization & Architecture → Performance → Performance Principles: Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Report a mistake

Q17. When a problem involving Performance Principles occurs, what should be done first? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AReplace several components before collecting evidence.
  2. BAssume the first suspected cause is correct.
  3. CIgnore measurements because troubleshooting should rely on intuition.
  4. DEstablish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
Show answer
Answer: D. Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.Computer Organization & Architecture → Performance → Performance Principles: Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
Report a mistake

Q18. Which evidence best supports a performance assessment involving Performance Principles? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AAssume theoretical peak performance equals sustained system performance.
  2. BUse relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
  3. CUse an unrelated metric because it is easy to measure.
  4. DReport a single number without operating conditions.
Show answer
Answer: B. Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.Computer Organization & Architecture → Performance → Performance Principles: Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Report a mistake

Q19. Which trade-off should be considered when selecting an approach to Performance Principles? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AOnly maximum speed matters in every design.
  2. BPower and cost never affect architecture decisions.
  3. CImplementation complexity has no effect on reliability or schedule.
  4. DBalance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
Show answer
Answer: D. Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.Computer Organization & Architecture → Performance → Performance Principles: Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
Report a mistake

Q20. Which example best represents disciplined engineering practice involving Performance Principles? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AUse personal preference instead of requirements and evidence.
  2. BDocument requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
  3. CMake undocumented hardware changes during testing.
  4. DModify multiple interfaces simultaneously without isolation.
Show answer
Answer: B. Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.Computer Organization & Architecture → Performance → Performance Principles: Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Report a mistake

Q21. Which statement best describes Performance Analysis within Performance? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AIt can be evaluated without knowing any constraints or operating conditions.
  2. BIt should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
  3. CIt is only a naming convention with no effect on system behavior.
  4. DIt guarantees correct operation without considering interfaces.
Show answer
Answer: B. It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.Computer Organization & Architecture → Performance → Performance Analysis: It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
Report a mistake

Q22. What is the primary engineering purpose of Performance Analysis? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AIts sole purpose is to maximize component count.
  2. BIt removes the need for requirements and verification.
  3. CIt guarantees maximum performance regardless of power or cost.
  4. DIt supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Show answer
Answer: D. It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.Computer Organization & Architecture → Performance → Performance Analysis: It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Report a mistake

Q23. A computer-engineering team is working with Performance Analysis. Which approach is most appropriate? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. ASkip verification once the design compiles or powers on.
  2. BDefine requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
  3. CSelect components before defining requirements.
  4. DIgnore hardware-software interfaces because they are independent.
Show answer
Answer: B. Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.Computer Organization & Architecture → Performance → Performance Analysis: Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
Report a mistake

Q24. Which principle best supports correct analysis of Performance Analysis? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AUse equations without checking their assumptions.
  2. BIgnore units and boundary conditions when calculations appear reasonable.
  3. CChoose the result that looks familiar instead of validating the model.
  4. DUse an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Show answer
Answer: D. Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.Computer Organization & Architecture → Performance → Performance Analysis: Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Report a mistake

Q25. Which consideration is most important when designing a solution involving Performance Analysis? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AChoose the most complex architecture even when requirements are simple.
  2. BBalance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
  3. CAlways maximize clock rate regardless of power and reliability.
  4. DIgnore interfaces if each component works independently.
Show answer
Answer: B. Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.Computer Organization & Architecture → Performance → Performance Analysis: Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
Report a mistake

Q26. How should an engineer verify work involving Performance Analysis? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AAssume simulation alone proves every physical implementation.
  2. BTest only the easiest operating condition.
  3. CTreat successful compilation as complete system validation.
  4. DTest against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Show answer
Answer: D. Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.Computer Organization & Architecture → Performance → Performance Analysis: Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Report a mistake

Q27. When a problem involving Performance Analysis occurs, what should be done first? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AIgnore measurements because troubleshooting should rely on intuition.
  2. BEstablish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
  3. CReplace several components before collecting evidence.
  4. DAssume the first suspected cause is correct.
Show answer
Answer: B. Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.Computer Organization & Architecture → Performance → Performance Analysis: Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
Report a mistake

Q28. Which evidence best supports a performance assessment involving Performance Analysis? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AUse an unrelated metric because it is easy to measure.
  2. BReport a single number without operating conditions.
  3. CAssume theoretical peak performance equals sustained system performance.
  4. DUse relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Show answer
Answer: D. Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.Computer Organization & Architecture → Performance → Performance Analysis: Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Report a mistake

Q29. Which trade-off should be considered when selecting an approach to Performance Analysis? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AImplementation complexity has no effect on reliability or schedule.
  2. BBalance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
  3. COnly maximum speed matters in every design.
  4. DPower and cost never affect architecture decisions.
Show answer
Answer: B. Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.Computer Organization & Architecture → Performance → Performance Analysis: Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
Report a mistake

Q30. Which example best represents disciplined engineering practice involving Performance Analysis? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AMake undocumented hardware changes during testing.
  2. BModify multiple interfaces simultaneously without isolation.
  3. CUse personal preference instead of requirements and evidence.
  4. DDocument requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Show answer
Answer: D. Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.Computer Organization & Architecture → Performance → Performance Analysis: Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Report a mistake

Q31. Which statement best describes Performance Design within Performance? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AIt is only a naming convention with no effect on system behavior.
  2. BIt guarantees correct operation without considering interfaces.
  3. CIt can be evaluated without knowing any constraints or operating conditions.
  4. DIt should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
Show answer
Answer: D. It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.Computer Organization & Architecture → Performance → Performance Design: It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
Report a mistake

Q32. What is the primary engineering purpose of Performance Design? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AIt guarantees maximum performance regardless of power or cost.
  2. BIt supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
  3. CIts sole purpose is to maximize component count.
  4. DIt removes the need for requirements and verification.
Show answer
Answer: B. It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.Computer Organization & Architecture → Performance → Performance Design: It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Report a mistake

Q33. A computer-engineering team is working with Performance Design. Which approach is most appropriate? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. ASelect components before defining requirements.
  2. BIgnore hardware-software interfaces because they are independent.
  3. CSkip verification once the design compiles or powers on.
  4. DDefine requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
Show answer
Answer: D. Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.Computer Organization & Architecture → Performance → Performance Design: Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
Report a mistake

Q34. Which principle best supports correct analysis of Performance Design? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AChoose the result that looks familiar instead of validating the model.
  2. BUse an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
  3. CUse equations without checking their assumptions.
  4. DIgnore units and boundary conditions when calculations appear reasonable.
Show answer
Answer: B. Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.Computer Organization & Architecture → Performance → Performance Design: Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Report a mistake

Q35. Which consideration is most important when designing a solution involving Performance Design? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AAlways maximize clock rate regardless of power and reliability.
  2. BIgnore interfaces if each component works independently.
  3. CChoose the most complex architecture even when requirements are simple.
  4. DBalance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
Show answer
Answer: D. Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.Computer Organization & Architecture → Performance → Performance Design: Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
Report a mistake

Q36. How should an engineer verify work involving Performance Design? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. ATreat successful compilation as complete system validation.
  2. BTest against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
  3. CAssume simulation alone proves every physical implementation.
  4. DTest only the easiest operating condition.
Show answer
Answer: B. Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.Computer Organization & Architecture → Performance → Performance Design: Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Report a mistake

Q37. When a problem involving Performance Design occurs, what should be done first? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AReplace several components before collecting evidence.
  2. BAssume the first suspected cause is correct.
  3. CIgnore measurements because troubleshooting should rely on intuition.
  4. DEstablish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
Show answer
Answer: D. Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.Computer Organization & Architecture → Performance → Performance Design: Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
Report a mistake

Q38. Which evidence best supports a performance assessment involving Performance Design? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AAssume theoretical peak performance equals sustained system performance.
  2. BUse relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
  3. CUse an unrelated metric because it is easy to measure.
  4. DReport a single number without operating conditions.
Show answer
Answer: B. Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.Computer Organization & Architecture → Performance → Performance Design: Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Report a mistake

Q39. Which trade-off should be considered when selecting an approach to Performance Design? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AOnly maximum speed matters in every design.
  2. BPower and cost never affect architecture decisions.
  3. CImplementation complexity has no effect on reliability or schedule.
  4. DBalance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
Show answer
Answer: D. Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.Computer Organization & Architecture → Performance → Performance Design: Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
Report a mistake

Q40. Which example best represents disciplined engineering practice involving Performance Design? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AUse personal preference instead of requirements and evidence.
  2. BDocument requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
  3. CMake undocumented hardware changes during testing.
  4. DModify multiple interfaces simultaneously without isolation.
Show answer
Answer: B. Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.Computer Organization & Architecture → Performance → Performance Design: Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Report a mistake

Q41. Which statement best describes Performance Applications within Performance? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AIt can be evaluated without knowing any constraints or operating conditions.
  2. BIt should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
  3. CIt is only a naming convention with no effect on system behavior.
  4. DIt guarantees correct operation without considering interfaces.
Show answer
Answer: B. It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.Computer Organization & Architecture → Performance → Performance Applications: It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
Report a mistake

Q42. What is the primary engineering purpose of Performance Applications? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AIts sole purpose is to maximize component count.
  2. BIt removes the need for requirements and verification.
  3. CIt guarantees maximum performance regardless of power or cost.
  4. DIt supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Show answer
Answer: D. It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.Computer Organization & Architecture → Performance → Performance Applications: It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Report a mistake

Q43. A computer-engineering team is working with Performance Applications. Which approach is most appropriate? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. ASkip verification once the design compiles or powers on.
  2. BDefine requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
  3. CSelect components before defining requirements.
  4. DIgnore hardware-software interfaces because they are independent.
Show answer
Answer: B. Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.Computer Organization & Architecture → Performance → Performance Applications: Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
Report a mistake

Q44. Which principle best supports correct analysis of Performance Applications? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AUse equations without checking their assumptions.
  2. BIgnore units and boundary conditions when calculations appear reasonable.
  3. CChoose the result that looks familiar instead of validating the model.
  4. DUse an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Show answer
Answer: D. Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.Computer Organization & Architecture → Performance → Performance Applications: Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Report a mistake

Q45. Which consideration is most important when designing a solution involving Performance Applications? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AChoose the most complex architecture even when requirements are simple.
  2. BBalance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
  3. CAlways maximize clock rate regardless of power and reliability.
  4. DIgnore interfaces if each component works independently.
Show answer
Answer: B. Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.Computer Organization & Architecture → Performance → Performance Applications: Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
Report a mistake

Q46. How should an engineer verify work involving Performance Applications? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AAssume simulation alone proves every physical implementation.
  2. BTest only the easiest operating condition.
  3. CTreat successful compilation as complete system validation.
  4. DTest against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Show answer
Answer: D. Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.Computer Organization & Architecture → Performance → Performance Applications: Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Report a mistake

Q47. When a problem involving Performance Applications occurs, what should be done first? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AIgnore measurements because troubleshooting should rely on intuition.
  2. BEstablish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
  3. CReplace several components before collecting evidence.
  4. DAssume the first suspected cause is correct.
Show answer
Answer: B. Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.Computer Organization & Architecture → Performance → Performance Applications: Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
Report a mistake

Q48. Which evidence best supports a performance assessment involving Performance Applications? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AUse an unrelated metric because it is easy to measure.
  2. BReport a single number without operating conditions.
  3. CAssume theoretical peak performance equals sustained system performance.
  4. DUse relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Show answer
Answer: D. Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.Computer Organization & Architecture → Performance → Performance Applications: Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Report a mistake

Q49. Which trade-off should be considered when selecting an approach to Performance Applications? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AImplementation complexity has no effect on reliability or schedule.
  2. BBalance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
  3. COnly maximum speed matters in every design.
  4. DPower and cost never affect architecture decisions.
Show answer
Answer: B. Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.Computer Organization & Architecture → Performance → Performance Applications: Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
Report a mistake

Q50. Which example best represents disciplined engineering practice involving Performance Applications? Context: BS Computer Engineering / Computer Organization & Architecture / Performance.

  1. AMake undocumented hardware changes during testing.
  2. BModify multiple interfaces simultaneously without isolation.
  3. CUse personal preference instead of requirements and evidence.
  4. DDocument requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Show answer
Answer: D. Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.Computer Organization & Architecture → Performance → Performance Applications: Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Report a mistake