BS Information Technology · Computer Networks

Unit 3: Ethernet and LANs MCQs

50 solved multiple choice questions with answers and short explanations.

Q1. Which statement best describes Ethernet and LANs Concepts in Ethernet and LANs? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AIt is only a naming convention and has no operational effect.
  2. BIt guarantees unlimited capacity without dependencies.
  3. CIt applies only to visual interface design.
  4. DIt should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Show answer
Answer: D. It should be understood through its function, dependencies, configuration, and effect on the wider IT service.Computer Networks → Ethernet and LANs → Ethernet and LANs Concepts: It should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Report a mistake

Q2. What is the main purpose of Ethernet and LANs Concepts in an Information Technology environment? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AIt guarantees security without controls or monitoring.
  2. BIt supports a defined business or technical service while meeting operational, security, and performance requirements.
  3. CIt eliminates the need for business requirements.
  4. DIts sole purpose is to maximize hardware count.
Show answer
Answer: B. It supports a defined business or technical service while meeting operational, security, and performance requirements.Computer Networks → Ethernet and LANs → Ethernet and LANs Concepts: It supports a defined business or technical service while meeting operational, security, and performance requirements.
Report a mistake

Q3. An IT team is working with Ethernet and LANs Concepts. Which action is most appropriate? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AChange production immediately without checking dependencies.
  2. BChoose a solution only because it is newest.
  3. CSkip verification because successful installation proves correctness.
  4. DConfirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Show answer
Answer: D. Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.Computer Networks → Ethernet and LANs → Ethernet and LANs Concepts: Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Report a mistake

Q4. Which approach best supports correct configuration or implementation of Ethernet and LANs Concepts? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AAssume configuration is correct whenever the service starts.
  2. BUse documented requirements and baselines, make controlled changes, and validate the configuration afterward.
  3. CUse undocumented defaults in every environment.
  4. DChange several unrelated settings at once and avoid recording them.
Show answer
Answer: B. Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.Computer Networks → Ethernet and LANs → Ethernet and LANs Concepts: Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.
Report a mistake

Q5. Which consideration is most important when securing or controlling Ethernet and LANs Concepts? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AGive all users administrator privileges to avoid access problems.
  2. BDisable logging so attackers cannot see logs.
  3. CUse the same shared credential for every service.
  4. DApply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Show answer
Answer: D. Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.Computer Networks → Ethernet and LANs → Ethernet and LANs Concepts: Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Report a mistake

Q6. Which practice best improves reliability when using Ethernet and LANs Concepts? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. ATreat backups as unnecessary when storage is new.
  2. BUse monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
  3. CAvoid monitoring to reduce system load.
  4. DDepend on one component and never test recovery.
Show answer
Answer: B. Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.Computer Networks → Ethernet and LANs → Ethernet and LANs Concepts: Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
Report a mistake

Q7. When troubleshooting Ethernet and LANs Concepts, what should be done first? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AReplace multiple components before collecting evidence.
  2. BAssume the first suspected cause is correct.
  3. CIgnore logs because they cannot assist diagnosis.
  4. DEstablish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Show answer
Answer: D. Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.Computer Networks → Ethernet and LANs → Ethernet and LANs Concepts: Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Report a mistake

Q8. Which evidence best demonstrates that Ethernet and LANs Concepts is operating as intended? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AUse an unrelated metric because it is easy to obtain.
  2. BUse logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
  3. CRely only on a verbal statement that the system looks fine.
  4. DCount documentation pages regardless of service behavior.
Show answer
Answer: B. Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.Computer Networks → Ethernet and LANs → Ethernet and LANs Concepts: Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
Report a mistake

Q9. Which trade-off should be evaluated when selecting or scaling Ethernet and LANs Concepts? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AAlways maximize one metric and ignore all other constraints.
  2. BOnly purchase price matters in every IT decision.
  3. COperational complexity never affects technology selection.
  4. DBalance performance, availability, security, cost, scalability, and operational complexity.
Show answer
Answer: D. Balance performance, availability, security, cost, scalability, and operational complexity.Computer Networks → Ethernet and LANs → Ethernet and LANs Concepts: Balance performance, availability, security, cost, scalability, and operational complexity.
Report a mistake

Q10. Which example best represents professional practice involving Ethernet and LANs Concepts? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AUse personal preference instead of requirements and evidence.
  2. BDocument the objective, implement through controlled procedures, verify the outcome, and retain evidence.
  3. CMake untracked production changes whenever convenient.
  4. DAvoid documentation and post-change verification.
Show answer
Answer: B. Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.Computer Networks → Ethernet and LANs → Ethernet and LANs Concepts: Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.
Report a mistake

Q11. Which statement best describes Ethernet and LANs Components in Ethernet and LANs? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AIt applies only to visual interface design.
  2. BIt should be understood through its function, dependencies, configuration, and effect on the wider IT service.
  3. CIt is only a naming convention and has no operational effect.
  4. DIt guarantees unlimited capacity without dependencies.
Show answer
Answer: B. It should be understood through its function, dependencies, configuration, and effect on the wider IT service.Computer Networks → Ethernet and LANs → Ethernet and LANs Components: It should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Report a mistake

Q12. What is the main purpose of Ethernet and LANs Components in an Information Technology environment? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AIt eliminates the need for business requirements.
  2. BIts sole purpose is to maximize hardware count.
  3. CIt guarantees security without controls or monitoring.
  4. DIt supports a defined business or technical service while meeting operational, security, and performance requirements.
Show answer
Answer: D. It supports a defined business or technical service while meeting operational, security, and performance requirements.Computer Networks → Ethernet and LANs → Ethernet and LANs Components: It supports a defined business or technical service while meeting operational, security, and performance requirements.
Report a mistake

Q13. An IT team is working with Ethernet and LANs Components. Which action is most appropriate? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. ASkip verification because successful installation proves correctness.
  2. BConfirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
  3. CChange production immediately without checking dependencies.
  4. DChoose a solution only because it is newest.
Show answer
Answer: B. Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.Computer Networks → Ethernet and LANs → Ethernet and LANs Components: Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Report a mistake

Q14. Which approach best supports correct configuration or implementation of Ethernet and LANs Components? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AUse undocumented defaults in every environment.
  2. BChange several unrelated settings at once and avoid recording them.
  3. CAssume configuration is correct whenever the service starts.
  4. DUse documented requirements and baselines, make controlled changes, and validate the configuration afterward.
Show answer
Answer: D. Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.Computer Networks → Ethernet and LANs → Ethernet and LANs Components: Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.
Report a mistake

Q15. Which consideration is most important when securing or controlling Ethernet and LANs Components? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AUse the same shared credential for every service.
  2. BApply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
  3. CGive all users administrator privileges to avoid access problems.
  4. DDisable logging so attackers cannot see logs.
Show answer
Answer: B. Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.Computer Networks → Ethernet and LANs → Ethernet and LANs Components: Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Report a mistake

Q16. Which practice best improves reliability when using Ethernet and LANs Components? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AAvoid monitoring to reduce system load.
  2. BDepend on one component and never test recovery.
  3. CTreat backups as unnecessary when storage is new.
  4. DUse monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
Show answer
Answer: D. Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.Computer Networks → Ethernet and LANs → Ethernet and LANs Components: Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
Report a mistake

Q17. When troubleshooting Ethernet and LANs Components, what should be done first? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AIgnore logs because they cannot assist diagnosis.
  2. BEstablish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
  3. CReplace multiple components before collecting evidence.
  4. DAssume the first suspected cause is correct.
Show answer
Answer: B. Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.Computer Networks → Ethernet and LANs → Ethernet and LANs Components: Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Report a mistake

Q18. Which evidence best demonstrates that Ethernet and LANs Components is operating as intended? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. ARely only on a verbal statement that the system looks fine.
  2. BCount documentation pages regardless of service behavior.
  3. CUse an unrelated metric because it is easy to obtain.
  4. DUse logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
Show answer
Answer: D. Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.Computer Networks → Ethernet and LANs → Ethernet and LANs Components: Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
Report a mistake

Q19. Which trade-off should be evaluated when selecting or scaling Ethernet and LANs Components? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AOperational complexity never affects technology selection.
  2. BBalance performance, availability, security, cost, scalability, and operational complexity.
  3. CAlways maximize one metric and ignore all other constraints.
  4. DOnly purchase price matters in every IT decision.
Show answer
Answer: B. Balance performance, availability, security, cost, scalability, and operational complexity.Computer Networks → Ethernet and LANs → Ethernet and LANs Components: Balance performance, availability, security, cost, scalability, and operational complexity.
Report a mistake

Q20. Which example best represents professional practice involving Ethernet and LANs Components? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AMake untracked production changes whenever convenient.
  2. BAvoid documentation and post-change verification.
  3. CUse personal preference instead of requirements and evidence.
  4. DDocument the objective, implement through controlled procedures, verify the outcome, and retain evidence.
Show answer
Answer: D. Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.Computer Networks → Ethernet and LANs → Ethernet and LANs Components: Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.
Report a mistake

Q21. Which statement best describes Ethernet and LANs Configuration in Ethernet and LANs? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AIt is only a naming convention and has no operational effect.
  2. BIt guarantees unlimited capacity without dependencies.
  3. CIt applies only to visual interface design.
  4. DIt should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Show answer
Answer: D. It should be understood through its function, dependencies, configuration, and effect on the wider IT service.Computer Networks → Ethernet and LANs → Ethernet and LANs Configuration: It should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Report a mistake

Q22. What is the main purpose of Ethernet and LANs Configuration in an Information Technology environment? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AIt guarantees security without controls or monitoring.
  2. BIt supports a defined business or technical service while meeting operational, security, and performance requirements.
  3. CIt eliminates the need for business requirements.
  4. DIts sole purpose is to maximize hardware count.
Show answer
Answer: B. It supports a defined business or technical service while meeting operational, security, and performance requirements.Computer Networks → Ethernet and LANs → Ethernet and LANs Configuration: It supports a defined business or technical service while meeting operational, security, and performance requirements.
Report a mistake

Q23. An IT team is working with Ethernet and LANs Configuration. Which action is most appropriate? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AChange production immediately without checking dependencies.
  2. BChoose a solution only because it is newest.
  3. CSkip verification because successful installation proves correctness.
  4. DConfirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Show answer
Answer: D. Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.Computer Networks → Ethernet and LANs → Ethernet and LANs Configuration: Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Report a mistake

Q24. Which approach best supports correct configuration or implementation of Ethernet and LANs Configuration? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AAssume configuration is correct whenever the service starts.
  2. BUse documented requirements and baselines, make controlled changes, and validate the configuration afterward.
  3. CUse undocumented defaults in every environment.
  4. DChange several unrelated settings at once and avoid recording them.
Show answer
Answer: B. Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.Computer Networks → Ethernet and LANs → Ethernet and LANs Configuration: Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.
Report a mistake

Q25. Which consideration is most important when securing or controlling Ethernet and LANs Configuration? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AGive all users administrator privileges to avoid access problems.
  2. BDisable logging so attackers cannot see logs.
  3. CUse the same shared credential for every service.
  4. DApply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Show answer
Answer: D. Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.Computer Networks → Ethernet and LANs → Ethernet and LANs Configuration: Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Report a mistake

Q26. Which practice best improves reliability when using Ethernet and LANs Configuration? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. ATreat backups as unnecessary when storage is new.
  2. BUse monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
  3. CAvoid monitoring to reduce system load.
  4. DDepend on one component and never test recovery.
Show answer
Answer: B. Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.Computer Networks → Ethernet and LANs → Ethernet and LANs Configuration: Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
Report a mistake

Q27. When troubleshooting Ethernet and LANs Configuration, what should be done first? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AReplace multiple components before collecting evidence.
  2. BAssume the first suspected cause is correct.
  3. CIgnore logs because they cannot assist diagnosis.
  4. DEstablish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Show answer
Answer: D. Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.Computer Networks → Ethernet and LANs → Ethernet and LANs Configuration: Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Report a mistake

Q28. Which evidence best demonstrates that Ethernet and LANs Configuration is operating as intended? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AUse an unrelated metric because it is easy to obtain.
  2. BUse logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
  3. CRely only on a verbal statement that the system looks fine.
  4. DCount documentation pages regardless of service behavior.
Show answer
Answer: B. Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.Computer Networks → Ethernet and LANs → Ethernet and LANs Configuration: Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
Report a mistake

Q29. Which trade-off should be evaluated when selecting or scaling Ethernet and LANs Configuration? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AAlways maximize one metric and ignore all other constraints.
  2. BOnly purchase price matters in every IT decision.
  3. COperational complexity never affects technology selection.
  4. DBalance performance, availability, security, cost, scalability, and operational complexity.
Show answer
Answer: D. Balance performance, availability, security, cost, scalability, and operational complexity.Computer Networks → Ethernet and LANs → Ethernet and LANs Configuration: Balance performance, availability, security, cost, scalability, and operational complexity.
Report a mistake

Q30. Which example best represents professional practice involving Ethernet and LANs Configuration? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AUse personal preference instead of requirements and evidence.
  2. BDocument the objective, implement through controlled procedures, verify the outcome, and retain evidence.
  3. CMake untracked production changes whenever convenient.
  4. DAvoid documentation and post-change verification.
Show answer
Answer: B. Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.Computer Networks → Ethernet and LANs → Ethernet and LANs Configuration: Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.
Report a mistake

Q31. Which statement best describes Ethernet and LANs Evaluation in Ethernet and LANs? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AIt applies only to visual interface design.
  2. BIt should be understood through its function, dependencies, configuration, and effect on the wider IT service.
  3. CIt is only a naming convention and has no operational effect.
  4. DIt guarantees unlimited capacity without dependencies.
Show answer
Answer: B. It should be understood through its function, dependencies, configuration, and effect on the wider IT service.Computer Networks → Ethernet and LANs → Ethernet and LANs Evaluation: It should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Report a mistake

Q32. What is the main purpose of Ethernet and LANs Evaluation in an Information Technology environment? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AIt eliminates the need for business requirements.
  2. BIts sole purpose is to maximize hardware count.
  3. CIt guarantees security without controls or monitoring.
  4. DIt supports a defined business or technical service while meeting operational, security, and performance requirements.
Show answer
Answer: D. It supports a defined business or technical service while meeting operational, security, and performance requirements.Computer Networks → Ethernet and LANs → Ethernet and LANs Evaluation: It supports a defined business or technical service while meeting operational, security, and performance requirements.
Report a mistake

Q33. An IT team is working with Ethernet and LANs Evaluation. Which action is most appropriate? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. ASkip verification because successful installation proves correctness.
  2. BConfirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
  3. CChange production immediately without checking dependencies.
  4. DChoose a solution only because it is newest.
Show answer
Answer: B. Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.Computer Networks → Ethernet and LANs → Ethernet and LANs Evaluation: Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Report a mistake

Q34. Which approach best supports correct configuration or implementation of Ethernet and LANs Evaluation? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AUse undocumented defaults in every environment.
  2. BChange several unrelated settings at once and avoid recording them.
  3. CAssume configuration is correct whenever the service starts.
  4. DUse documented requirements and baselines, make controlled changes, and validate the configuration afterward.
Show answer
Answer: D. Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.Computer Networks → Ethernet and LANs → Ethernet and LANs Evaluation: Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.
Report a mistake

Q35. Which consideration is most important when securing or controlling Ethernet and LANs Evaluation? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AUse the same shared credential for every service.
  2. BApply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
  3. CGive all users administrator privileges to avoid access problems.
  4. DDisable logging so attackers cannot see logs.
Show answer
Answer: B. Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.Computer Networks → Ethernet and LANs → Ethernet and LANs Evaluation: Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Report a mistake

Q36. Which practice best improves reliability when using Ethernet and LANs Evaluation? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AAvoid monitoring to reduce system load.
  2. BDepend on one component and never test recovery.
  3. CTreat backups as unnecessary when storage is new.
  4. DUse monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
Show answer
Answer: D. Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.Computer Networks → Ethernet and LANs → Ethernet and LANs Evaluation: Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
Report a mistake

Q37. When troubleshooting Ethernet and LANs Evaluation, what should be done first? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AIgnore logs because they cannot assist diagnosis.
  2. BEstablish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
  3. CReplace multiple components before collecting evidence.
  4. DAssume the first suspected cause is correct.
Show answer
Answer: B. Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.Computer Networks → Ethernet and LANs → Ethernet and LANs Evaluation: Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Report a mistake

Q38. Which evidence best demonstrates that Ethernet and LANs Evaluation is operating as intended? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. ARely only on a verbal statement that the system looks fine.
  2. BCount documentation pages regardless of service behavior.
  3. CUse an unrelated metric because it is easy to obtain.
  4. DUse logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
Show answer
Answer: D. Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.Computer Networks → Ethernet and LANs → Ethernet and LANs Evaluation: Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
Report a mistake

Q39. Which trade-off should be evaluated when selecting or scaling Ethernet and LANs Evaluation? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AOperational complexity never affects technology selection.
  2. BBalance performance, availability, security, cost, scalability, and operational complexity.
  3. CAlways maximize one metric and ignore all other constraints.
  4. DOnly purchase price matters in every IT decision.
Show answer
Answer: B. Balance performance, availability, security, cost, scalability, and operational complexity.Computer Networks → Ethernet and LANs → Ethernet and LANs Evaluation: Balance performance, availability, security, cost, scalability, and operational complexity.
Report a mistake

Q40. Which example best represents professional practice involving Ethernet and LANs Evaluation? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AMake untracked production changes whenever convenient.
  2. BAvoid documentation and post-change verification.
  3. CUse personal preference instead of requirements and evidence.
  4. DDocument the objective, implement through controlled procedures, verify the outcome, and retain evidence.
Show answer
Answer: D. Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.Computer Networks → Ethernet and LANs → Ethernet and LANs Evaluation: Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.
Report a mistake

Q41. Which statement best describes Ethernet and LANs Applications in Ethernet and LANs? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AIt is only a naming convention and has no operational effect.
  2. BIt guarantees unlimited capacity without dependencies.
  3. CIt applies only to visual interface design.
  4. DIt should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Show answer
Answer: D. It should be understood through its function, dependencies, configuration, and effect on the wider IT service.Computer Networks → Ethernet and LANs → Ethernet and LANs Applications: It should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Report a mistake

Q42. What is the main purpose of Ethernet and LANs Applications in an Information Technology environment? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AIt guarantees security without controls or monitoring.
  2. BIt supports a defined business or technical service while meeting operational, security, and performance requirements.
  3. CIt eliminates the need for business requirements.
  4. DIts sole purpose is to maximize hardware count.
Show answer
Answer: B. It supports a defined business or technical service while meeting operational, security, and performance requirements.Computer Networks → Ethernet and LANs → Ethernet and LANs Applications: It supports a defined business or technical service while meeting operational, security, and performance requirements.
Report a mistake

Q43. An IT team is working with Ethernet and LANs Applications. Which action is most appropriate? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AChange production immediately without checking dependencies.
  2. BChoose a solution only because it is newest.
  3. CSkip verification because successful installation proves correctness.
  4. DConfirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Show answer
Answer: D. Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.Computer Networks → Ethernet and LANs → Ethernet and LANs Applications: Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Report a mistake

Q44. Which approach best supports correct configuration or implementation of Ethernet and LANs Applications? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AAssume configuration is correct whenever the service starts.
  2. BUse documented requirements and baselines, make controlled changes, and validate the configuration afterward.
  3. CUse undocumented defaults in every environment.
  4. DChange several unrelated settings at once and avoid recording them.
Show answer
Answer: B. Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.Computer Networks → Ethernet and LANs → Ethernet and LANs Applications: Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.
Report a mistake

Q45. Which consideration is most important when securing or controlling Ethernet and LANs Applications? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AGive all users administrator privileges to avoid access problems.
  2. BDisable logging so attackers cannot see logs.
  3. CUse the same shared credential for every service.
  4. DApply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Show answer
Answer: D. Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.Computer Networks → Ethernet and LANs → Ethernet and LANs Applications: Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Report a mistake

Q46. Which practice best improves reliability when using Ethernet and LANs Applications? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. ATreat backups as unnecessary when storage is new.
  2. BUse monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
  3. CAvoid monitoring to reduce system load.
  4. DDepend on one component and never test recovery.
Show answer
Answer: B. Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.Computer Networks → Ethernet and LANs → Ethernet and LANs Applications: Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
Report a mistake

Q47. When troubleshooting Ethernet and LANs Applications, what should be done first? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AReplace multiple components before collecting evidence.
  2. BAssume the first suspected cause is correct.
  3. CIgnore logs because they cannot assist diagnosis.
  4. DEstablish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Show answer
Answer: D. Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.Computer Networks → Ethernet and LANs → Ethernet and LANs Applications: Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Report a mistake

Q48. Which evidence best demonstrates that Ethernet and LANs Applications is operating as intended? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AUse an unrelated metric because it is easy to obtain.
  2. BUse logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
  3. CRely only on a verbal statement that the system looks fine.
  4. DCount documentation pages regardless of service behavior.
Show answer
Answer: B. Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.Computer Networks → Ethernet and LANs → Ethernet and LANs Applications: Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
Report a mistake

Q49. Which trade-off should be evaluated when selecting or scaling Ethernet and LANs Applications? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AAlways maximize one metric and ignore all other constraints.
  2. BOnly purchase price matters in every IT decision.
  3. COperational complexity never affects technology selection.
  4. DBalance performance, availability, security, cost, scalability, and operational complexity.
Show answer
Answer: D. Balance performance, availability, security, cost, scalability, and operational complexity.Computer Networks → Ethernet and LANs → Ethernet and LANs Applications: Balance performance, availability, security, cost, scalability, and operational complexity.
Report a mistake

Q50. Which example best represents professional practice involving Ethernet and LANs Applications? Context: BS Information Technology / Computer Networks / Ethernet and LANs.

  1. AUse personal preference instead of requirements and evidence.
  2. BDocument the objective, implement through controlled procedures, verify the outcome, and retain evidence.
  3. CMake untracked production changes whenever convenient.
  4. DAvoid documentation and post-change verification.
Show answer
Answer: B. Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.Computer Networks → Ethernet and LANs → Ethernet and LANs Applications: Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.
Report a mistake