BS Information Technology · DevOps & Automation

Unit 9: DevSecOps MCQs

50 solved multiple choice questions with answers and short explanations.

Q1. Which statement best describes DevSecOps Concepts in DevSecOps? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AIt is only a naming convention and has no operational effect.
  2. BIt guarantees unlimited capacity without dependencies.
  3. CIt applies only to visual interface design.
  4. DIt should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Show answer
Answer: D. It should be understood through its function, dependencies, configuration, and effect on the wider IT service.DevOps & Automation → DevSecOps → DevSecOps Concepts: It should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Report a mistake

Q2. What is the main purpose of DevSecOps Concepts in an Information Technology environment? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AIt guarantees security without controls or monitoring.
  2. BIt supports a defined business or technical service while meeting operational, security, and performance requirements.
  3. CIt eliminates the need for business requirements.
  4. DIts sole purpose is to maximize hardware count.
Show answer
Answer: B. It supports a defined business or technical service while meeting operational, security, and performance requirements.DevOps & Automation → DevSecOps → DevSecOps Concepts: It supports a defined business or technical service while meeting operational, security, and performance requirements.
Report a mistake

Q3. An IT team is working with DevSecOps Concepts. Which action is most appropriate? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AChange production immediately without checking dependencies.
  2. BChoose a solution only because it is newest.
  3. CSkip verification because successful installation proves correctness.
  4. DConfirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Show answer
Answer: D. Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.DevOps & Automation → DevSecOps → DevSecOps Concepts: Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Report a mistake

Q4. Which approach best supports correct configuration or implementation of DevSecOps Concepts? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AAssume configuration is correct whenever the service starts.
  2. BUse documented requirements and baselines, make controlled changes, and validate the configuration afterward.
  3. CUse undocumented defaults in every environment.
  4. DChange several unrelated settings at once and avoid recording them.
Show answer
Answer: B. Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.DevOps & Automation → DevSecOps → DevSecOps Concepts: Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.
Report a mistake

Q5. Which consideration is most important when securing or controlling DevSecOps Concepts? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AGive all users administrator privileges to avoid access problems.
  2. BDisable logging so attackers cannot see logs.
  3. CUse the same shared credential for every service.
  4. DApply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Show answer
Answer: D. Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.DevOps & Automation → DevSecOps → DevSecOps Concepts: Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Report a mistake

Q6. Which practice best improves reliability when using DevSecOps Concepts? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. ATreat backups as unnecessary when storage is new.
  2. BUse monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
  3. CAvoid monitoring to reduce system load.
  4. DDepend on one component and never test recovery.
Show answer
Answer: B. Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.DevOps & Automation → DevSecOps → DevSecOps Concepts: Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
Report a mistake

Q7. When troubleshooting DevSecOps Concepts, what should be done first? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AReplace multiple components before collecting evidence.
  2. BAssume the first suspected cause is correct.
  3. CIgnore logs because they cannot assist diagnosis.
  4. DEstablish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Show answer
Answer: D. Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.DevOps & Automation → DevSecOps → DevSecOps Concepts: Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Report a mistake

Q8. Which evidence best demonstrates that DevSecOps Concepts is operating as intended? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AUse an unrelated metric because it is easy to obtain.
  2. BUse logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
  3. CRely only on a verbal statement that the system looks fine.
  4. DCount documentation pages regardless of service behavior.
Show answer
Answer: B. Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.DevOps & Automation → DevSecOps → DevSecOps Concepts: Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
Report a mistake

Q9. Which trade-off should be evaluated when selecting or scaling DevSecOps Concepts? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AAlways maximize one metric and ignore all other constraints.
  2. BOnly purchase price matters in every IT decision.
  3. COperational complexity never affects technology selection.
  4. DBalance performance, availability, security, cost, scalability, and operational complexity.
Show answer
Answer: D. Balance performance, availability, security, cost, scalability, and operational complexity.DevOps & Automation → DevSecOps → DevSecOps Concepts: Balance performance, availability, security, cost, scalability, and operational complexity.
Report a mistake

Q10. Which example best represents professional practice involving DevSecOps Concepts? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AUse personal preference instead of requirements and evidence.
  2. BDocument the objective, implement through controlled procedures, verify the outcome, and retain evidence.
  3. CMake untracked production changes whenever convenient.
  4. DAvoid documentation and post-change verification.
Show answer
Answer: B. Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.DevOps & Automation → DevSecOps → DevSecOps Concepts: Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.
Report a mistake

Q11. Which statement best describes DevSecOps Components in DevSecOps? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AIt applies only to visual interface design.
  2. BIt should be understood through its function, dependencies, configuration, and effect on the wider IT service.
  3. CIt is only a naming convention and has no operational effect.
  4. DIt guarantees unlimited capacity without dependencies.
Show answer
Answer: B. It should be understood through its function, dependencies, configuration, and effect on the wider IT service.DevOps & Automation → DevSecOps → DevSecOps Components: It should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Report a mistake

Q12. What is the main purpose of DevSecOps Components in an Information Technology environment? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AIt eliminates the need for business requirements.
  2. BIts sole purpose is to maximize hardware count.
  3. CIt guarantees security without controls or monitoring.
  4. DIt supports a defined business or technical service while meeting operational, security, and performance requirements.
Show answer
Answer: D. It supports a defined business or technical service while meeting operational, security, and performance requirements.DevOps & Automation → DevSecOps → DevSecOps Components: It supports a defined business or technical service while meeting operational, security, and performance requirements.
Report a mistake

Q13. An IT team is working with DevSecOps Components. Which action is most appropriate? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. ASkip verification because successful installation proves correctness.
  2. BConfirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
  3. CChange production immediately without checking dependencies.
  4. DChoose a solution only because it is newest.
Show answer
Answer: B. Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.DevOps & Automation → DevSecOps → DevSecOps Components: Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Report a mistake

Q14. Which approach best supports correct configuration or implementation of DevSecOps Components? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AUse undocumented defaults in every environment.
  2. BChange several unrelated settings at once and avoid recording them.
  3. CAssume configuration is correct whenever the service starts.
  4. DUse documented requirements and baselines, make controlled changes, and validate the configuration afterward.
Show answer
Answer: D. Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.DevOps & Automation → DevSecOps → DevSecOps Components: Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.
Report a mistake

Q15. Which consideration is most important when securing or controlling DevSecOps Components? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AUse the same shared credential for every service.
  2. BApply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
  3. CGive all users administrator privileges to avoid access problems.
  4. DDisable logging so attackers cannot see logs.
Show answer
Answer: B. Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.DevOps & Automation → DevSecOps → DevSecOps Components: Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Report a mistake

Q16. Which practice best improves reliability when using DevSecOps Components? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AAvoid monitoring to reduce system load.
  2. BDepend on one component and never test recovery.
  3. CTreat backups as unnecessary when storage is new.
  4. DUse monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
Show answer
Answer: D. Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.DevOps & Automation → DevSecOps → DevSecOps Components: Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
Report a mistake

Q17. When troubleshooting DevSecOps Components, what should be done first? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AIgnore logs because they cannot assist diagnosis.
  2. BEstablish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
  3. CReplace multiple components before collecting evidence.
  4. DAssume the first suspected cause is correct.
Show answer
Answer: B. Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.DevOps & Automation → DevSecOps → DevSecOps Components: Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Report a mistake

Q18. Which evidence best demonstrates that DevSecOps Components is operating as intended? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. ARely only on a verbal statement that the system looks fine.
  2. BCount documentation pages regardless of service behavior.
  3. CUse an unrelated metric because it is easy to obtain.
  4. DUse logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
Show answer
Answer: D. Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.DevOps & Automation → DevSecOps → DevSecOps Components: Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
Report a mistake

Q19. Which trade-off should be evaluated when selecting or scaling DevSecOps Components? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AOperational complexity never affects technology selection.
  2. BBalance performance, availability, security, cost, scalability, and operational complexity.
  3. CAlways maximize one metric and ignore all other constraints.
  4. DOnly purchase price matters in every IT decision.
Show answer
Answer: B. Balance performance, availability, security, cost, scalability, and operational complexity.DevOps & Automation → DevSecOps → DevSecOps Components: Balance performance, availability, security, cost, scalability, and operational complexity.
Report a mistake

Q20. Which example best represents professional practice involving DevSecOps Components? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AMake untracked production changes whenever convenient.
  2. BAvoid documentation and post-change verification.
  3. CUse personal preference instead of requirements and evidence.
  4. DDocument the objective, implement through controlled procedures, verify the outcome, and retain evidence.
Show answer
Answer: D. Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.DevOps & Automation → DevSecOps → DevSecOps Components: Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.
Report a mistake

Q21. Which statement best describes DevSecOps Configuration in DevSecOps? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AIt is only a naming convention and has no operational effect.
  2. BIt guarantees unlimited capacity without dependencies.
  3. CIt applies only to visual interface design.
  4. DIt should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Show answer
Answer: D. It should be understood through its function, dependencies, configuration, and effect on the wider IT service.DevOps & Automation → DevSecOps → DevSecOps Configuration: It should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Report a mistake

Q22. What is the main purpose of DevSecOps Configuration in an Information Technology environment? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AIt guarantees security without controls or monitoring.
  2. BIt supports a defined business or technical service while meeting operational, security, and performance requirements.
  3. CIt eliminates the need for business requirements.
  4. DIts sole purpose is to maximize hardware count.
Show answer
Answer: B. It supports a defined business or technical service while meeting operational, security, and performance requirements.DevOps & Automation → DevSecOps → DevSecOps Configuration: It supports a defined business or technical service while meeting operational, security, and performance requirements.
Report a mistake

Q23. An IT team is working with DevSecOps Configuration. Which action is most appropriate? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AChange production immediately without checking dependencies.
  2. BChoose a solution only because it is newest.
  3. CSkip verification because successful installation proves correctness.
  4. DConfirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Show answer
Answer: D. Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.DevOps & Automation → DevSecOps → DevSecOps Configuration: Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Report a mistake

Q24. Which approach best supports correct configuration or implementation of DevSecOps Configuration? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AAssume configuration is correct whenever the service starts.
  2. BUse documented requirements and baselines, make controlled changes, and validate the configuration afterward.
  3. CUse undocumented defaults in every environment.
  4. DChange several unrelated settings at once and avoid recording them.
Show answer
Answer: B. Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.DevOps & Automation → DevSecOps → DevSecOps Configuration: Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.
Report a mistake

Q25. Which consideration is most important when securing or controlling DevSecOps Configuration? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AGive all users administrator privileges to avoid access problems.
  2. BDisable logging so attackers cannot see logs.
  3. CUse the same shared credential for every service.
  4. DApply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Show answer
Answer: D. Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.DevOps & Automation → DevSecOps → DevSecOps Configuration: Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Report a mistake

Q26. Which practice best improves reliability when using DevSecOps Configuration? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. ATreat backups as unnecessary when storage is new.
  2. BUse monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
  3. CAvoid monitoring to reduce system load.
  4. DDepend on one component and never test recovery.
Show answer
Answer: B. Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.DevOps & Automation → DevSecOps → DevSecOps Configuration: Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
Report a mistake

Q27. When troubleshooting DevSecOps Configuration, what should be done first? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AReplace multiple components before collecting evidence.
  2. BAssume the first suspected cause is correct.
  3. CIgnore logs because they cannot assist diagnosis.
  4. DEstablish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Show answer
Answer: D. Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.DevOps & Automation → DevSecOps → DevSecOps Configuration: Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Report a mistake

Q28. Which evidence best demonstrates that DevSecOps Configuration is operating as intended? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AUse an unrelated metric because it is easy to obtain.
  2. BUse logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
  3. CRely only on a verbal statement that the system looks fine.
  4. DCount documentation pages regardless of service behavior.
Show answer
Answer: B. Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.DevOps & Automation → DevSecOps → DevSecOps Configuration: Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
Report a mistake

Q29. Which trade-off should be evaluated when selecting or scaling DevSecOps Configuration? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AAlways maximize one metric and ignore all other constraints.
  2. BOnly purchase price matters in every IT decision.
  3. COperational complexity never affects technology selection.
  4. DBalance performance, availability, security, cost, scalability, and operational complexity.
Show answer
Answer: D. Balance performance, availability, security, cost, scalability, and operational complexity.DevOps & Automation → DevSecOps → DevSecOps Configuration: Balance performance, availability, security, cost, scalability, and operational complexity.
Report a mistake

Q30. Which example best represents professional practice involving DevSecOps Configuration? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AUse personal preference instead of requirements and evidence.
  2. BDocument the objective, implement through controlled procedures, verify the outcome, and retain evidence.
  3. CMake untracked production changes whenever convenient.
  4. DAvoid documentation and post-change verification.
Show answer
Answer: B. Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.DevOps & Automation → DevSecOps → DevSecOps Configuration: Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.
Report a mistake

Q31. Which statement best describes DevSecOps Evaluation in DevSecOps? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AIt applies only to visual interface design.
  2. BIt should be understood through its function, dependencies, configuration, and effect on the wider IT service.
  3. CIt is only a naming convention and has no operational effect.
  4. DIt guarantees unlimited capacity without dependencies.
Show answer
Answer: B. It should be understood through its function, dependencies, configuration, and effect on the wider IT service.DevOps & Automation → DevSecOps → DevSecOps Evaluation: It should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Report a mistake

Q32. What is the main purpose of DevSecOps Evaluation in an Information Technology environment? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AIt eliminates the need for business requirements.
  2. BIts sole purpose is to maximize hardware count.
  3. CIt guarantees security without controls or monitoring.
  4. DIt supports a defined business or technical service while meeting operational, security, and performance requirements.
Show answer
Answer: D. It supports a defined business or technical service while meeting operational, security, and performance requirements.DevOps & Automation → DevSecOps → DevSecOps Evaluation: It supports a defined business or technical service while meeting operational, security, and performance requirements.
Report a mistake

Q33. An IT team is working with DevSecOps Evaluation. Which action is most appropriate? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. ASkip verification because successful installation proves correctness.
  2. BConfirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
  3. CChange production immediately without checking dependencies.
  4. DChoose a solution only because it is newest.
Show answer
Answer: B. Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.DevOps & Automation → DevSecOps → DevSecOps Evaluation: Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Report a mistake

Q34. Which approach best supports correct configuration or implementation of DevSecOps Evaluation? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AUse undocumented defaults in every environment.
  2. BChange several unrelated settings at once and avoid recording them.
  3. CAssume configuration is correct whenever the service starts.
  4. DUse documented requirements and baselines, make controlled changes, and validate the configuration afterward.
Show answer
Answer: D. Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.DevOps & Automation → DevSecOps → DevSecOps Evaluation: Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.
Report a mistake

Q35. Which consideration is most important when securing or controlling DevSecOps Evaluation? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AUse the same shared credential for every service.
  2. BApply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
  3. CGive all users administrator privileges to avoid access problems.
  4. DDisable logging so attackers cannot see logs.
Show answer
Answer: B. Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.DevOps & Automation → DevSecOps → DevSecOps Evaluation: Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Report a mistake

Q36. Which practice best improves reliability when using DevSecOps Evaluation? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AAvoid monitoring to reduce system load.
  2. BDepend on one component and never test recovery.
  3. CTreat backups as unnecessary when storage is new.
  4. DUse monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
Show answer
Answer: D. Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.DevOps & Automation → DevSecOps → DevSecOps Evaluation: Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
Report a mistake

Q37. When troubleshooting DevSecOps Evaluation, what should be done first? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AIgnore logs because they cannot assist diagnosis.
  2. BEstablish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
  3. CReplace multiple components before collecting evidence.
  4. DAssume the first suspected cause is correct.
Show answer
Answer: B. Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.DevOps & Automation → DevSecOps → DevSecOps Evaluation: Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Report a mistake

Q38. Which evidence best demonstrates that DevSecOps Evaluation is operating as intended? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. ARely only on a verbal statement that the system looks fine.
  2. BCount documentation pages regardless of service behavior.
  3. CUse an unrelated metric because it is easy to obtain.
  4. DUse logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
Show answer
Answer: D. Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.DevOps & Automation → DevSecOps → DevSecOps Evaluation: Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
Report a mistake

Q39. Which trade-off should be evaluated when selecting or scaling DevSecOps Evaluation? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AOperational complexity never affects technology selection.
  2. BBalance performance, availability, security, cost, scalability, and operational complexity.
  3. CAlways maximize one metric and ignore all other constraints.
  4. DOnly purchase price matters in every IT decision.
Show answer
Answer: B. Balance performance, availability, security, cost, scalability, and operational complexity.DevOps & Automation → DevSecOps → DevSecOps Evaluation: Balance performance, availability, security, cost, scalability, and operational complexity.
Report a mistake

Q40. Which example best represents professional practice involving DevSecOps Evaluation? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AMake untracked production changes whenever convenient.
  2. BAvoid documentation and post-change verification.
  3. CUse personal preference instead of requirements and evidence.
  4. DDocument the objective, implement through controlled procedures, verify the outcome, and retain evidence.
Show answer
Answer: D. Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.DevOps & Automation → DevSecOps → DevSecOps Evaluation: Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.
Report a mistake

Q41. Which statement best describes DevSecOps Applications in DevSecOps? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AIt is only a naming convention and has no operational effect.
  2. BIt guarantees unlimited capacity without dependencies.
  3. CIt applies only to visual interface design.
  4. DIt should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Show answer
Answer: D. It should be understood through its function, dependencies, configuration, and effect on the wider IT service.DevOps & Automation → DevSecOps → DevSecOps Applications: It should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Report a mistake

Q42. What is the main purpose of DevSecOps Applications in an Information Technology environment? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AIt guarantees security without controls or monitoring.
  2. BIt supports a defined business or technical service while meeting operational, security, and performance requirements.
  3. CIt eliminates the need for business requirements.
  4. DIts sole purpose is to maximize hardware count.
Show answer
Answer: B. It supports a defined business or technical service while meeting operational, security, and performance requirements.DevOps & Automation → DevSecOps → DevSecOps Applications: It supports a defined business or technical service while meeting operational, security, and performance requirements.
Report a mistake

Q43. An IT team is working with DevSecOps Applications. Which action is most appropriate? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AChange production immediately without checking dependencies.
  2. BChoose a solution only because it is newest.
  3. CSkip verification because successful installation proves correctness.
  4. DConfirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Show answer
Answer: D. Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.DevOps & Automation → DevSecOps → DevSecOps Applications: Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Report a mistake

Q44. Which approach best supports correct configuration or implementation of DevSecOps Applications? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AAssume configuration is correct whenever the service starts.
  2. BUse documented requirements and baselines, make controlled changes, and validate the configuration afterward.
  3. CUse undocumented defaults in every environment.
  4. DChange several unrelated settings at once and avoid recording them.
Show answer
Answer: B. Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.DevOps & Automation → DevSecOps → DevSecOps Applications: Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.
Report a mistake

Q45. Which consideration is most important when securing or controlling DevSecOps Applications? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AGive all users administrator privileges to avoid access problems.
  2. BDisable logging so attackers cannot see logs.
  3. CUse the same shared credential for every service.
  4. DApply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Show answer
Answer: D. Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.DevOps & Automation → DevSecOps → DevSecOps Applications: Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Report a mistake

Q46. Which practice best improves reliability when using DevSecOps Applications? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. ATreat backups as unnecessary when storage is new.
  2. BUse monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
  3. CAvoid monitoring to reduce system load.
  4. DDepend on one component and never test recovery.
Show answer
Answer: B. Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.DevOps & Automation → DevSecOps → DevSecOps Applications: Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
Report a mistake

Q47. When troubleshooting DevSecOps Applications, what should be done first? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AReplace multiple components before collecting evidence.
  2. BAssume the first suspected cause is correct.
  3. CIgnore logs because they cannot assist diagnosis.
  4. DEstablish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Show answer
Answer: D. Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.DevOps & Automation → DevSecOps → DevSecOps Applications: Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Report a mistake

Q48. Which evidence best demonstrates that DevSecOps Applications is operating as intended? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AUse an unrelated metric because it is easy to obtain.
  2. BUse logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
  3. CRely only on a verbal statement that the system looks fine.
  4. DCount documentation pages regardless of service behavior.
Show answer
Answer: B. Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.DevOps & Automation → DevSecOps → DevSecOps Applications: Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
Report a mistake

Q49. Which trade-off should be evaluated when selecting or scaling DevSecOps Applications? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AAlways maximize one metric and ignore all other constraints.
  2. BOnly purchase price matters in every IT decision.
  3. COperational complexity never affects technology selection.
  4. DBalance performance, availability, security, cost, scalability, and operational complexity.
Show answer
Answer: D. Balance performance, availability, security, cost, scalability, and operational complexity.DevOps & Automation → DevSecOps → DevSecOps Applications: Balance performance, availability, security, cost, scalability, and operational complexity.
Report a mistake

Q50. Which example best represents professional practice involving DevSecOps Applications? Context: BS Information Technology / DevOps & Automation / DevSecOps.

  1. AUse personal preference instead of requirements and evidence.
  2. BDocument the objective, implement through controlled procedures, verify the outcome, and retain evidence.
  3. CMake untracked production changes whenever convenient.
  4. DAvoid documentation and post-change verification.
Show answer
Answer: B. Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.DevOps & Automation → DevSecOps → DevSecOps Applications: Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.
Report a mistake