Civil Engineering · Construction Materials

Unit 5: Properties & Testing of Concrete MCQs

50 solved multiple choice questions with answers and short explanations.

Q1. What is the main purpose of studying Fresh Concrete Tests in construction materials engineering?

  1. ATo understand the properties, performance, selection, testing, and applications associated with Fresh Concrete Tests
  2. BTo replace structural analysis entirely
  3. CTo determine land boundaries only
  4. DTo eliminate material testing
Show answer
Answer: A. To understand the properties, performance, selection, testing, and applications associated with Fresh Concrete TestsFresh Concrete Tests is studied to support appropriate material selection, testing, specification, and performance assessment.
Report a mistake

Q2. When evaluating Fresh Concrete Tests, which information should be established first?

  1. AOnly the supplier logo
  2. BRelevant material properties, exposure conditions, performance requirements, and test criteria
  3. COnly the drawing title
  4. DThe final result before testing
Show answer
Answer: B. Relevant material properties, exposure conditions, performance requirements, and test criteriaA sound evaluation of Fresh Concrete Tests begins with the required properties, service environment, performance criteria, and applicable tests.
Report a mistake

Q3. Which statement represents good engineering practice for Fresh Concrete Tests?

  1. AIgnore variability between samples
  2. BUse appearance as the only criterion
  3. CUse representative test data and applicable standards to assess suitability
  4. DAssume every material source is identical
Show answer
Answer: C. Use representative test data and applicable standards to assess suitabilityEngineering assessment of Fresh Concrete Tests should use suitable sampling, testing, specifications, and performance requirements.
Report a mistake

Q4. Why should applicable standards be checked when assessing Fresh Concrete Tests?

  1. AStandards apply only to page formatting
  2. BAll standards contain identical limits
  3. CStandards remove the need for sampling
  4. DTest procedures, acceptance limits, and classifications can differ among standards
Show answer
Answer: D. Test procedures, acceptance limits, and classifications can differ among standardsApplicable standards define how Fresh Concrete Tests should be classified, tested, specified, or accepted.
Report a mistake

Q5. If a material associated with Fresh Concrete Tests fails a specified requirement, what is the appropriate response?

  1. AInvestigate the cause and reject, reprocess, redesign, or otherwise address it according to the specification
  2. BIgnore the failed test
  3. CDelete the result
  4. DAutomatically accept the material
Show answer
Answer: A. Investigate the cause and reject, reprocess, redesign, or otherwise address it according to the specificationA failed Fresh Concrete Tests requirement requires engineering review and an appropriate corrective action.
Report a mistake

Q6. Why are consistent units important in calculations involving Fresh Concrete Tests?

  1. AUnits affect only spreadsheet appearance
  2. BThey are necessary for physically meaningful and numerically correct results
  3. CUnits can always be mixed without conversion
  4. DUnits are irrelevant in material testing
Show answer
Answer: B. They are necessary for physically meaningful and numerically correct resultsConsistent units help prevent calculation and interpretation errors in Fresh Concrete Tests.
Report a mistake

Q7. Which information should normally be documented for Fresh Concrete Tests?

  1. AOnly the final number
  2. BUnrelated personal notes
  3. CMaterial source, sampling, test method, results, assumptions, and acceptance criteria
  4. DOnly the file name
Show answer
Answer: C. Material source, sampling, test method, results, assumptions, and acceptance criteriaTraceable documentation makes a Fresh Concrete Tests assessment reviewable and auditable.
Report a mistake

Q8. Why is representative sampling important for Fresh Concrete Tests?

  1. ASampling never affects results
  2. BOne tiny sample always represents every batch
  3. CSampling is needed only after construction
  4. DA nonrepresentative sample can give a misleading indication of material quality
Show answer
Answer: D. A nonrepresentative sample can give a misleading indication of material qualityConstruction materials can vary within and between batches, so representative sampling is important.
Report a mistake

Q9. When several properties can govern the suitability of Fresh Concrete Tests, what should be done?

  1. AEvaluate all relevant properties and identify any governing requirement
  2. BCheck only the easiest property
  3. CIgnore durability
  4. DAssume strength is the only property that matters
Show answer
Answer: A. Evaluate all relevant properties and identify any governing requirementMaterial suitability can depend on strength, durability, workability, dimensional stability, and other requirements.
Report a mistake

Q10. What generally indicates a satisfactory outcome for Fresh Concrete Tests?

  1. AThe material is the most expensive available
  2. BThe material meets the applicable performance and specification requirements for its intended use
  3. CNo testing was performed
  4. DAll uncertainty was assumed to be zero
Show answer
Answer: B. The material meets the applicable performance and specification requirements for its intended useA satisfactory Fresh Concrete Tests assessment demonstrates compliance with the requirements relevant to the intended application.
Report a mistake

Q11. Concrete compressive strength is determined by applying what type of load to a specimen?

  1. APure tension
  2. BPure torsion only
  3. CCompression
  4. DHydrostatic uplift
Show answer
Answer: C. CompressionStandard concrete specimens are loaded in compression to determine compressive strength.
Report a mistake

Q12. Compressive strength is calculated from failure load divided by what?

  1. ASpecimen volume
  2. BCuring time
  3. CAggregate mass
  4. DLoaded cross-sectional area
Show answer
Answer: D. Loaded cross-sectional areaAverage compressive stress at failure is load divided by loaded area.
Report a mistake

Q13. Why is specimen curing important before strength testing?

  1. AHydration and moisture history influence measured strength
  2. BCuring changes specimen labels only
  3. CCuring eliminates cement
  4. DCuring has no influence
Show answer
Answer: A. Hydration and moisture history influence measured strengthTemperature and moisture conditions during curing strongly affect strength development.
Report a mistake

Q14. Concrete strength generally does what with continued proper curing at early ages?

  1. AAlways decreases
  2. BIncreases
  3. CImmediately becomes zero
  4. DBecomes unrelated to hydration
Show answer
Answer: B. IncreasesHydration continues with suitable moisture and temperature, increasing strength.
Report a mistake

Q15. Why should specimen dimensions and test procedures follow a standard?

  1. ADimensions never affect results
  2. BStandards are only for appearance
  3. CMeasured strength depends on specimen and testing conditions
  4. DAny loading rate gives identical results
Show answer
Answer: C. Measured strength depends on specimen and testing conditionsStandardized preparation and loading improve comparability and reliability.
Report a mistake

Q16. What is the main purpose of studying Compressive Strength in construction materials engineering?

  1. ATo replace structural analysis entirely
  2. BTo determine land boundaries only
  3. CTo eliminate material testing
  4. DTo understand the properties, performance, selection, testing, and applications associated with Compressive Strength
Show answer
Answer: D. To understand the properties, performance, selection, testing, and applications associated with Compressive StrengthCompressive Strength is studied to support appropriate material selection, testing, specification, and performance assessment.
Report a mistake

Q17. When evaluating Compressive Strength, which information should be established first?

  1. ARelevant material properties, exposure conditions, performance requirements, and test criteria
  2. BOnly the supplier logo
  3. COnly the drawing title
  4. DThe final result before testing
Show answer
Answer: A. Relevant material properties, exposure conditions, performance requirements, and test criteriaA sound evaluation of Compressive Strength begins with the required properties, service environment, performance criteria, and applicable tests.
Report a mistake

Q18. Which statement represents good engineering practice for Compressive Strength?

  1. AIgnore variability between samples
  2. BUse representative test data and applicable standards to assess suitability
  3. CUse appearance as the only criterion
  4. DAssume every material source is identical
Show answer
Answer: B. Use representative test data and applicable standards to assess suitabilityEngineering assessment of Compressive Strength should use suitable sampling, testing, specifications, and performance requirements.
Report a mistake

Q19. Why should applicable standards be checked when assessing Compressive Strength?

  1. AStandards apply only to page formatting
  2. BAll standards contain identical limits
  3. CTest procedures, acceptance limits, and classifications can differ among standards
  4. DStandards remove the need for sampling
Show answer
Answer: C. Test procedures, acceptance limits, and classifications can differ among standardsApplicable standards define how Compressive Strength should be classified, tested, specified, or accepted.
Report a mistake

Q20. If a material associated with Compressive Strength fails a specified requirement, what is the appropriate response?

  1. AIgnore the failed test
  2. BDelete the result
  3. CAutomatically accept the material
  4. DInvestigate the cause and reject, reprocess, redesign, or otherwise address it according to the specification
Show answer
Answer: D. Investigate the cause and reject, reprocess, redesign, or otherwise address it according to the specificationA failed Compressive Strength requirement requires engineering review and an appropriate corrective action.
Report a mistake

Q21. What is the main purpose of studying Tensile & Flexural Strength in construction materials engineering?

  1. ATo understand the properties, performance, selection, testing, and applications associated with Tensile & Flexural Strength
  2. BTo replace structural analysis entirely
  3. CTo determine land boundaries only
  4. DTo eliminate material testing
Show answer
Answer: A. To understand the properties, performance, selection, testing, and applications associated with Tensile & Flexural StrengthTensile & Flexural Strength is studied to support appropriate material selection, testing, specification, and performance assessment.
Report a mistake

Q22. When evaluating Tensile & Flexural Strength, which information should be established first?

  1. AOnly the supplier logo
  2. BRelevant material properties, exposure conditions, performance requirements, and test criteria
  3. COnly the drawing title
  4. DThe final result before testing
Show answer
Answer: B. Relevant material properties, exposure conditions, performance requirements, and test criteriaA sound evaluation of Tensile & Flexural Strength begins with the required properties, service environment, performance criteria, and applicable tests.
Report a mistake

Q23. Which statement represents good engineering practice for Tensile & Flexural Strength?

  1. AIgnore variability between samples
  2. BUse appearance as the only criterion
  3. CUse representative test data and applicable standards to assess suitability
  4. DAssume every material source is identical
Show answer
Answer: C. Use representative test data and applicable standards to assess suitabilityEngineering assessment of Tensile & Flexural Strength should use suitable sampling, testing, specifications, and performance requirements.
Report a mistake

Q24. Why should applicable standards be checked when assessing Tensile & Flexural Strength?

  1. AStandards apply only to page formatting
  2. BAll standards contain identical limits
  3. CStandards remove the need for sampling
  4. DTest procedures, acceptance limits, and classifications can differ among standards
Show answer
Answer: D. Test procedures, acceptance limits, and classifications can differ among standardsApplicable standards define how Tensile & Flexural Strength should be classified, tested, specified, or accepted.
Report a mistake

Q25. If a material associated with Tensile & Flexural Strength fails a specified requirement, what is the appropriate response?

  1. AInvestigate the cause and reject, reprocess, redesign, or otherwise address it according to the specification
  2. BIgnore the failed test
  3. CDelete the result
  4. DAutomatically accept the material
Show answer
Answer: A. Investigate the cause and reject, reprocess, redesign, or otherwise address it according to the specificationA failed Tensile & Flexural Strength requirement requires engineering review and an appropriate corrective action.
Report a mistake

Q26. Why are consistent units important in calculations involving Tensile & Flexural Strength?

  1. AUnits affect only spreadsheet appearance
  2. BThey are necessary for physically meaningful and numerically correct results
  3. CUnits can always be mixed without conversion
  4. DUnits are irrelevant in material testing
Show answer
Answer: B. They are necessary for physically meaningful and numerically correct resultsConsistent units help prevent calculation and interpretation errors in Tensile & Flexural Strength.
Report a mistake

Q27. Which information should normally be documented for Tensile & Flexural Strength?

  1. AOnly the final number
  2. BUnrelated personal notes
  3. CMaterial source, sampling, test method, results, assumptions, and acceptance criteria
  4. DOnly the file name
Show answer
Answer: C. Material source, sampling, test method, results, assumptions, and acceptance criteriaTraceable documentation makes a Tensile & Flexural Strength assessment reviewable and auditable.
Report a mistake

Q28. Why is representative sampling important for Tensile & Flexural Strength?

  1. ASampling never affects results
  2. BOne tiny sample always represents every batch
  3. CSampling is needed only after construction
  4. DA nonrepresentative sample can give a misleading indication of material quality
Show answer
Answer: D. A nonrepresentative sample can give a misleading indication of material qualityConstruction materials can vary within and between batches, so representative sampling is important.
Report a mistake

Q29. When several properties can govern the suitability of Tensile & Flexural Strength, what should be done?

  1. AEvaluate all relevant properties and identify any governing requirement
  2. BCheck only the easiest property
  3. CIgnore durability
  4. DAssume strength is the only property that matters
Show answer
Answer: A. Evaluate all relevant properties and identify any governing requirementMaterial suitability can depend on strength, durability, workability, dimensional stability, and other requirements.
Report a mistake

Q30. What generally indicates a satisfactory outcome for Tensile & Flexural Strength?

  1. AThe material is the most expensive available
  2. BThe material meets the applicable performance and specification requirements for its intended use
  3. CNo testing was performed
  4. DAll uncertainty was assumed to be zero
Show answer
Answer: B. The material meets the applicable performance and specification requirements for its intended useA satisfactory Tensile & Flexural Strength assessment demonstrates compliance with the requirements relevant to the intended application.
Report a mistake

Q31. Concrete creep is what?

  1. AInstantaneous elastic recovery only
  2. BSteel corrosion
  3. CTime-dependent strain under sustained stress
  4. DAggregate grading
Show answer
Answer: C. Time-dependent strain under sustained stressCreep is additional deformation that develops with time under sustained load.
Report a mistake

Q32. Concrete shrinkage is what?

  1. AIncrease in steel area
  2. BTraffic-induced vibration
  3. CAggregate crushing
  4. DTime-dependent volume reduction that can occur without external mechanical load
Show answer
Answer: D. Time-dependent volume reduction that can occur without external mechanical loadShrinkage results from moisture and physicochemical changes in concrete.
Report a mistake

Q33. Why can creep affect long-term beam deflection?

  1. ASustained stress produces additional strain with time
  2. BCreep increases elastic modulus indefinitely
  3. CCreep removes gravity
  4. DCreep affects only color
Show answer
Answer: A. Sustained stress produces additional strain with timeCreep contributes to increasing deformation under sustained service loads.
Report a mistake

Q34. Drying shrinkage is strongly influenced by what?

  1. ASteel yield strength only
  2. BMoisture loss and member/environment conditions
  3. CTraffic volume
  4. DRail gauge
Show answer
Answer: B. Moisture loss and member/environment conditionsDrying conditions, member size, mix proportions, and moisture loss influence shrinkage.
Report a mistake

Q35. Restraint of shrinkage can lead to what?

  1. AAutomatic prestressing
  2. BZero stress
  3. CTensile stress and cracking
  4. DHigher aggregate size
Show answer
Answer: C. Tensile stress and crackingIf free shrinkage is restrained, tensile stresses can develop and cause cracks.
Report a mistake

Q36. What is the main purpose of studying Creep & Shrinkage in construction materials engineering?

  1. ATo replace structural analysis entirely
  2. BTo determine land boundaries only
  3. CTo eliminate material testing
  4. DTo understand the properties, performance, selection, testing, and applications associated with Creep & Shrinkage
Show answer
Answer: D. To understand the properties, performance, selection, testing, and applications associated with Creep & ShrinkageCreep & Shrinkage is studied to support appropriate material selection, testing, specification, and performance assessment.
Report a mistake

Q37. When evaluating Creep & Shrinkage, which information should be established first?

  1. ARelevant material properties, exposure conditions, performance requirements, and test criteria
  2. BOnly the supplier logo
  3. COnly the drawing title
  4. DThe final result before testing
Show answer
Answer: A. Relevant material properties, exposure conditions, performance requirements, and test criteriaA sound evaluation of Creep & Shrinkage begins with the required properties, service environment, performance criteria, and applicable tests.
Report a mistake

Q38. Which statement represents good engineering practice for Creep & Shrinkage?

  1. AIgnore variability between samples
  2. BUse representative test data and applicable standards to assess suitability
  3. CUse appearance as the only criterion
  4. DAssume every material source is identical
Show answer
Answer: B. Use representative test data and applicable standards to assess suitabilityEngineering assessment of Creep & Shrinkage should use suitable sampling, testing, specifications, and performance requirements.
Report a mistake

Q39. Why should applicable standards be checked when assessing Creep & Shrinkage?

  1. AStandards apply only to page formatting
  2. BAll standards contain identical limits
  3. CTest procedures, acceptance limits, and classifications can differ among standards
  4. DStandards remove the need for sampling
Show answer
Answer: C. Test procedures, acceptance limits, and classifications can differ among standardsApplicable standards define how Creep & Shrinkage should be classified, tested, specified, or accepted.
Report a mistake

Q40. If a material associated with Creep & Shrinkage fails a specified requirement, what is the appropriate response?

  1. AIgnore the failed test
  2. BDelete the result
  3. CAutomatically accept the material
  4. DInvestigate the cause and reject, reprocess, redesign, or otherwise address it according to the specification
Show answer
Answer: D. Investigate the cause and reject, reprocess, redesign, or otherwise address it according to the specificationA failed Creep & Shrinkage requirement requires engineering review and an appropriate corrective action.
Report a mistake

Q41. What is the main purpose of studying Non-Destructive Testing in construction materials engineering?

  1. ATo understand the properties, performance, selection, testing, and applications associated with Non-Destructive Testing
  2. BTo replace structural analysis entirely
  3. CTo determine land boundaries only
  4. DTo eliminate material testing
Show answer
Answer: A. To understand the properties, performance, selection, testing, and applications associated with Non-Destructive TestingNon-Destructive Testing is studied to support appropriate material selection, testing, specification, and performance assessment.
Report a mistake

Q42. When evaluating Non-Destructive Testing, which information should be established first?

  1. AOnly the supplier logo
  2. BRelevant material properties, exposure conditions, performance requirements, and test criteria
  3. COnly the drawing title
  4. DThe final result before testing
Show answer
Answer: B. Relevant material properties, exposure conditions, performance requirements, and test criteriaA sound evaluation of Non-Destructive Testing begins with the required properties, service environment, performance criteria, and applicable tests.
Report a mistake

Q43. Which statement represents good engineering practice for Non-Destructive Testing?

  1. AIgnore variability between samples
  2. BUse appearance as the only criterion
  3. CUse representative test data and applicable standards to assess suitability
  4. DAssume every material source is identical
Show answer
Answer: C. Use representative test data and applicable standards to assess suitabilityEngineering assessment of Non-Destructive Testing should use suitable sampling, testing, specifications, and performance requirements.
Report a mistake

Q44. Why should applicable standards be checked when assessing Non-Destructive Testing?

  1. AStandards apply only to page formatting
  2. BAll standards contain identical limits
  3. CStandards remove the need for sampling
  4. DTest procedures, acceptance limits, and classifications can differ among standards
Show answer
Answer: D. Test procedures, acceptance limits, and classifications can differ among standardsApplicable standards define how Non-Destructive Testing should be classified, tested, specified, or accepted.
Report a mistake

Q45. If a material associated with Non-Destructive Testing fails a specified requirement, what is the appropriate response?

  1. AInvestigate the cause and reject, reprocess, redesign, or otherwise address it according to the specification
  2. BIgnore the failed test
  3. CDelete the result
  4. DAutomatically accept the material
Show answer
Answer: A. Investigate the cause and reject, reprocess, redesign, or otherwise address it according to the specificationA failed Non-Destructive Testing requirement requires engineering review and an appropriate corrective action.
Report a mistake

Q46. Why are consistent units important in calculations involving Non-Destructive Testing?

  1. AUnits affect only spreadsheet appearance
  2. BThey are necessary for physically meaningful and numerically correct results
  3. CUnits can always be mixed without conversion
  4. DUnits are irrelevant in material testing
Show answer
Answer: B. They are necessary for physically meaningful and numerically correct resultsConsistent units help prevent calculation and interpretation errors in Non-Destructive Testing.
Report a mistake

Q47. Which information should normally be documented for Non-Destructive Testing?

  1. AOnly the final number
  2. BUnrelated personal notes
  3. CMaterial source, sampling, test method, results, assumptions, and acceptance criteria
  4. DOnly the file name
Show answer
Answer: C. Material source, sampling, test method, results, assumptions, and acceptance criteriaTraceable documentation makes a Non-Destructive Testing assessment reviewable and auditable.
Report a mistake

Q48. Why is representative sampling important for Non-Destructive Testing?

  1. ASampling never affects results
  2. BOne tiny sample always represents every batch
  3. CSampling is needed only after construction
  4. DA nonrepresentative sample can give a misleading indication of material quality
Show answer
Answer: D. A nonrepresentative sample can give a misleading indication of material qualityConstruction materials can vary within and between batches, so representative sampling is important.
Report a mistake

Q49. When several properties can govern the suitability of Non-Destructive Testing, what should be done?

  1. AEvaluate all relevant properties and identify any governing requirement
  2. BCheck only the easiest property
  3. CIgnore durability
  4. DAssume strength is the only property that matters
Show answer
Answer: A. Evaluate all relevant properties and identify any governing requirementMaterial suitability can depend on strength, durability, workability, dimensional stability, and other requirements.
Report a mistake

Q50. What generally indicates a satisfactory outcome for Non-Destructive Testing?

  1. AThe material is the most expensive available
  2. BThe material meets the applicable performance and specification requirements for its intended use
  3. CNo testing was performed
  4. DAll uncertainty was assumed to be zero
Show answer
Answer: B. The material meets the applicable performance and specification requirements for its intended useA satisfactory Non-Destructive Testing assessment demonstrates compliance with the requirements relevant to the intended application.
Report a mistake