Civil Engineering · Hydrology & Water Resources

Unit 3: Infiltration & Evaporation MCQs

46 solved multiple choice questions with answers and short explanations.

Q1. Which statement best describes Infiltration Process?

  1. Aentry of water from the ground surface into soil
  2. Ba procedure used only for structural steel design
  3. Ca method concerned only with soil compaction
  4. Da surveying technique for angular measurement
Show answer
Answer: A. entry of water from the ground surface into soilInfiltration Process is best described as entry of water from the ground surface into soil.
Report a mistake

Q2. Which item is most directly associated with Infiltration Process?

  1. Aonly concrete slump and cube strength
  2. Binfiltration capacity usually declines during a storm
  3. Conly traffic signal timing
  4. Donly beam reinforcement detailing
Show answer
Answer: B. infiltration capacity usually declines during a stormA key association with Infiltration Process is infiltration capacity usually declines during a storm.
Report a mistake

Q3. What is a central principle when applying Infiltration Process in hydrology or water-resources engineering?

  1. Aignore spatial and temporal variability
  2. Bassume all losses are always zero
  3. Csoil condition and antecedent moisture affect infiltration
  4. Dreplace field data with structural load combinations
Show answer
Answer: C. soil condition and antecedent moisture affect infiltrationA central principle is that soil condition and antecedent moisture affect infiltration.
Report a mistake

Q4. An engineer is studying Infiltration Process. Which consideration is most relevant?

  1. Apaint color of laboratory walls
  2. Bvehicle wheel alignment
  3. Creinforcement bar bending schedule only
  4. Dsoil condition and antecedent moisture affect infiltration
Show answer
Answer: D. soil condition and antecedent moisture affect infiltrationThe relevant consideration is that soil condition and antecedent moisture affect infiltration.
Report a mistake

Q5. Which of the following would most reasonably appear in a technical discussion of Infiltration Process?

  1. Ainfiltration capacity usually declines during a storm
  2. Bwelding electrode classification only
  3. Cconcrete cover blocks only
  4. Drailway sleeper fastening only
Show answer
Answer: A. infiltration capacity usually declines during a stormInfiltration capacity usually declines during a storm is directly related to Infiltration Process.
Report a mistake

Q6. Why is Infiltration Process important in civil water engineering?

  1. Ait determines steel chemical composition
  2. Bit helps engineers analyze entry of water from the ground surface into soil
  3. Cit replaces all field measurements
  4. Dit is used only for architectural rendering
Show answer
Answer: B. it helps engineers analyze entry of water from the ground surface into soilIt is important because it helps engineers analyze entry of water from the ground surface into soil.
Report a mistake

Q7. Which statement about Infiltration Process is the most appropriate?

  1. Ait is unrelated to water movement or management
  2. Bit can be evaluated without any assumptions or data
  3. CSoil condition and antecedent moisture affect infiltration
  4. Dit applies only to dry structural members
Show answer
Answer: C. Soil condition and antecedent moisture affect infiltrationThe most appropriate statement is: soil condition and antecedent moisture affect infiltration.
Report a mistake

Q8. In a hydrologic study, information about Infiltration Process would primarily support which task?

  1. Aselecting a steel weld symbol
  2. Bestimating concrete cover
  3. Cchoosing a building paint system
  4. Dunderstanding or quantifying entry of water from the ground surface into soil
Show answer
Answer: D. understanding or quantifying entry of water from the ground surface into soilIt primarily supports understanding or quantifying entry of water from the ground surface into soil.
Report a mistake

Q9. When reviewing an analysis involving Infiltration Process, what should be checked first among these choices?

  1. Awhether unrelated structural drawings use the same font
  2. Bwhether the data and assumptions are consistent with the principle that soil condition and antecedent moisture affect infiltration
  3. Cwhether all rainfall is automatically set to zero
  4. Dwhether hydrologic variables have been replaced by traffic counts
Show answer
Answer: B. whether the data and assumptions are consistent with the principle that soil condition and antecedent moisture affect infiltrationThe analysis should be consistent with the governing concept: soil condition and antecedent moisture affect infiltration.
Report a mistake

Q10. Which statement best describes Infiltration Models?

  1. Amathematical representation of infiltration with time
  2. Ba procedure used only for structural steel design
  3. Ca method concerned only with soil compaction
  4. Da surveying technique for angular measurement
Show answer
Answer: A. mathematical representation of infiltration with timeInfiltration Models is best described as mathematical representation of infiltration with time.
Report a mistake

Q11. Which item is most directly associated with Infiltration Models?

  1. Aonly concrete slump and cube strength
  2. BHorton and Green-Ampt approaches
  3. Conly traffic signal timing
  4. Donly beam reinforcement detailing
Show answer
Answer: B. Horton and Green-Ampt approachesA key association with Infiltration Models is Horton and Green-Ampt approaches.
Report a mistake

Q12. What is a central principle when applying Infiltration Models in hydrology or water-resources engineering?

  1. Aignore spatial and temporal variability
  2. Bassume all losses are always zero
  3. Cmodel parameters describe soil and wetting behavior
  4. Dreplace field data with structural load combinations
Show answer
Answer: C. model parameters describe soil and wetting behaviorA central principle is that model parameters describe soil and wetting behavior.
Report a mistake

Q13. An engineer is studying Infiltration Models. Which consideration is most relevant?

  1. Apaint color of laboratory walls
  2. Bvehicle wheel alignment
  3. Creinforcement bar bending schedule only
  4. Dmodel parameters describe soil and wetting behavior
Show answer
Answer: D. model parameters describe soil and wetting behaviorThe relevant consideration is that model parameters describe soil and wetting behavior.
Report a mistake

Q14. Which of the following would most reasonably appear in a technical discussion of Infiltration Models?

  1. AHorton and Green-Ampt approaches
  2. Bwelding electrode classification only
  3. Cconcrete cover blocks only
  4. Drailway sleeper fastening only
Show answer
Answer: A. Horton and Green-Ampt approachesHorton and green-ampt approaches is directly related to Infiltration Models.
Report a mistake

Q15. Why is Infiltration Models important in civil water engineering?

  1. Ait determines steel chemical composition
  2. Bit helps engineers analyze mathematical representation of infiltration with time
  3. Cit replaces all field measurements
  4. Dit is used only for architectural rendering
Show answer
Answer: B. it helps engineers analyze mathematical representation of infiltration with timeIt is important because it helps engineers analyze mathematical representation of infiltration with time.
Report a mistake

Q16. Which statement about Infiltration Models is the most appropriate?

  1. Ait is unrelated to water movement or management
  2. Bit can be evaluated without any assumptions or data
  3. CModel parameters describe soil and wetting behavior
  4. Dit applies only to dry structural members
Show answer
Answer: C. Model parameters describe soil and wetting behaviorThe most appropriate statement is: model parameters describe soil and wetting behavior.
Report a mistake

Q17. In a hydrologic study, information about Infiltration Models would primarily support which task?

  1. Aselecting a steel weld symbol
  2. Bestimating concrete cover
  3. Cchoosing a building paint system
  4. Dunderstanding or quantifying mathematical representation of infiltration with time
Show answer
Answer: D. understanding or quantifying mathematical representation of infiltration with timeIt primarily supports understanding or quantifying mathematical representation of infiltration with time.
Report a mistake

Q18. When reviewing an analysis involving Infiltration Models, what should be checked first among these choices?

  1. Awhether unrelated structural drawings use the same font
  2. Bwhether the data and assumptions are consistent with the principle that model parameters describe soil and wetting behavior
  3. Cwhether all rainfall is automatically set to zero
  4. Dwhether hydrologic variables have been replaced by traffic counts
Show answer
Answer: B. whether the data and assumptions are consistent with the principle that model parameters describe soil and wetting behaviorThe analysis should be consistent with the governing concept: model parameters describe soil and wetting behavior.
Report a mistake

Q19. Which statement best describes Evaporation?

  1. Aconversion of liquid water to vapor from water or land surfaces
  2. Ba procedure used only for structural steel design
  3. Ca method concerned only with soil compaction
  4. Da surveying technique for angular measurement
Show answer
Answer: A. conversion of liquid water to vapor from water or land surfacesEvaporation is best described as conversion of liquid water to vapor from water or land surfaces.
Report a mistake

Q20. Which item is most directly associated with Evaporation?

  1. Aonly concrete slump and cube strength
  2. Benergy supply, vapor-pressure gradient and wind
  3. Conly traffic signal timing
  4. Donly beam reinforcement detailing
Show answer
Answer: B. energy supply, vapor-pressure gradient and windA key association with Evaporation is energy supply, vapor-pressure gradient and wind.
Report a mistake

Q21. What is a central principle when applying Evaporation in hydrology or water-resources engineering?

  1. Aignore spatial and temporal variability
  2. Bassume all losses are always zero
  3. Cpan evaporation is often used as an index
  4. Dreplace field data with structural load combinations
Show answer
Answer: C. pan evaporation is often used as an indexA central principle is that pan evaporation is often used as an index.
Report a mistake

Q22. An engineer is studying Evaporation. Which consideration is most relevant?

  1. Apaint color of laboratory walls
  2. Bvehicle wheel alignment
  3. Creinforcement bar bending schedule only
  4. Dpan evaporation is often used as an index
Show answer
Answer: D. pan evaporation is often used as an indexThe relevant consideration is that pan evaporation is often used as an index.
Report a mistake

Q23. Which of the following would most reasonably appear in a technical discussion of Evaporation?

  1. Aenergy supply, vapor-pressure gradient and wind
  2. Bwelding electrode classification only
  3. Cconcrete cover blocks only
  4. Drailway sleeper fastening only
Show answer
Answer: A. energy supply, vapor-pressure gradient and windEnergy supply, vapor-pressure gradient and wind is directly related to Evaporation.
Report a mistake

Q24. Why is Evaporation important in civil water engineering?

  1. Ait determines steel chemical composition
  2. Bit helps engineers analyze conversion of liquid water to vapor from water or land surfaces
  3. Cit replaces all field measurements
  4. Dit is used only for architectural rendering
Show answer
Answer: B. it helps engineers analyze conversion of liquid water to vapor from water or land surfacesIt is important because it helps engineers analyze conversion of liquid water to vapor from water or land surfaces.
Report a mistake

Q25. Which statement about Evaporation is the most appropriate?

  1. Ait is unrelated to water movement or management
  2. Bit can be evaluated without any assumptions or data
  3. CPan evaporation is often used as an index
  4. Dit applies only to dry structural members
Show answer
Answer: C. Pan evaporation is often used as an indexThe most appropriate statement is: pan evaporation is often used as an index.
Report a mistake

Q26. In a hydrologic study, information about Evaporation would primarily support which task?

  1. Aselecting a steel weld symbol
  2. Bestimating concrete cover
  3. Cchoosing a building paint system
  4. Dunderstanding or quantifying conversion of liquid water to vapor from water or land surfaces
Show answer
Answer: D. understanding or quantifying conversion of liquid water to vapor from water or land surfacesIt primarily supports understanding or quantifying conversion of liquid water to vapor from water or land surfaces.
Report a mistake

Q27. When reviewing an analysis involving Evaporation, what should be checked first among these choices?

  1. Awhether unrelated structural drawings use the same font
  2. Bwhether the data and assumptions are consistent with the principle that pan evaporation is often used as an index
  3. Cwhether all rainfall is automatically set to zero
  4. Dwhether hydrologic variables have been replaced by traffic counts
Show answer
Answer: B. whether the data and assumptions are consistent with the principle that pan evaporation is often used as an indexThe analysis should be consistent with the governing concept: pan evaporation is often used as an index.
Report a mistake

Q28. Which statement best describes Evapotranspiration?

  1. Acombined water loss by evaporation and plant transpiration
  2. Ba procedure used only for structural steel design
  3. Ca method concerned only with soil compaction
  4. Da surveying technique for angular measurement
Show answer
Answer: A. combined water loss by evaporation and plant transpirationEvapotranspiration is best described as combined water loss by evaporation and plant transpiration.
Report a mistake

Q29. Which item is most directly associated with Evapotranspiration?

  1. Aonly concrete slump and cube strength
  2. Breference ET may be estimated from climatic data
  3. Conly traffic signal timing
  4. Donly beam reinforcement detailing
Show answer
Answer: B. reference ET may be estimated from climatic dataA key association with Evapotranspiration is reference ET may be estimated from climatic data.
Report a mistake

Q30. What is a central principle when applying Evapotranspiration in hydrology or water-resources engineering?

  1. Aignore spatial and temporal variability
  2. Bassume all losses are always zero
  3. Ccrop and vegetation conditions modify actual ET
  4. Dreplace field data with structural load combinations
Show answer
Answer: C. crop and vegetation conditions modify actual ETA central principle is that crop and vegetation conditions modify actual ET.
Report a mistake

Q31. An engineer is studying Evapotranspiration. Which consideration is most relevant?

  1. Apaint color of laboratory walls
  2. Bvehicle wheel alignment
  3. Creinforcement bar bending schedule only
  4. Dcrop and vegetation conditions modify actual ET
Show answer
Answer: D. crop and vegetation conditions modify actual ETThe relevant consideration is that crop and vegetation conditions modify actual ET.
Report a mistake

Q32. Which of the following would most reasonably appear in a technical discussion of Evapotranspiration?

  1. Areference ET may be estimated from climatic data
  2. Bwelding electrode classification only
  3. Cconcrete cover blocks only
  4. Drailway sleeper fastening only
Show answer
Answer: A. reference ET may be estimated from climatic dataReference et may be estimated from climatic data is directly related to Evapotranspiration.
Report a mistake

Q33. Why is Evapotranspiration important in civil water engineering?

  1. Ait determines steel chemical composition
  2. Bit helps engineers analyze combined water loss by evaporation and plant transpiration
  3. Cit replaces all field measurements
  4. Dit is used only for architectural rendering
Show answer
Answer: B. it helps engineers analyze combined water loss by evaporation and plant transpirationIt is important because it helps engineers analyze combined water loss by evaporation and plant transpiration.
Report a mistake

Q34. Which statement about Evapotranspiration is the most appropriate?

  1. Ait is unrelated to water movement or management
  2. Bit can be evaluated without any assumptions or data
  3. CCrop and vegetation conditions modify actual et
  4. Dit applies only to dry structural members
Show answer
Answer: C. Crop and vegetation conditions modify actual etThe most appropriate statement is: crop and vegetation conditions modify actual ET.
Report a mistake

Q35. In a hydrologic study, information about Evapotranspiration would primarily support which task?

  1. Aselecting a steel weld symbol
  2. Bestimating concrete cover
  3. Cchoosing a building paint system
  4. Dunderstanding or quantifying combined water loss by evaporation and plant transpiration
Show answer
Answer: D. understanding or quantifying combined water loss by evaporation and plant transpirationIt primarily supports understanding or quantifying combined water loss by evaporation and plant transpiration.
Report a mistake

Q36. Which pairing is correctly matched?

  1. AEvapotranspiration — reference ET may be estimated from climatic data
  2. BEvapotranspiration — only asphalt penetration grading
  3. CEvapotranspiration — only column buckling length
  4. DEvapotranspiration — only cadastral bearing correction
Show answer
Answer: A. Evapotranspiration — reference ET may be estimated from climatic dataThe correct pairing is Evapotranspiration with reference ET may be estimated from climatic data.
Report a mistake

Q37. When reviewing an analysis involving Evapotranspiration, what should be checked first among these choices?

  1. Awhether unrelated structural drawings use the same font
  2. Bwhether the data and assumptions are consistent with the principle that crop and vegetation conditions modify actual ET
  3. Cwhether all rainfall is automatically set to zero
  4. Dwhether hydrologic variables have been replaced by traffic counts
Show answer
Answer: B. whether the data and assumptions are consistent with the principle that crop and vegetation conditions modify actual ETThe analysis should be consistent with the governing concept: crop and vegetation conditions modify actual ET.
Report a mistake

Q38. Which statement best describes Soil Moisture?

  1. Awater stored in the unsaturated soil zone
  2. Ba procedure used only for structural steel design
  3. Ca method concerned only with soil compaction
  4. Da surveying technique for angular measurement
Show answer
Answer: A. water stored in the unsaturated soil zoneSoil Moisture is best described as water stored in the unsaturated soil zone.
Report a mistake

Q39. Which item is most directly associated with Soil Moisture?

  1. Aonly concrete slump and cube strength
  2. Bfield capacity, wilting point and available water
  3. Conly traffic signal timing
  4. Donly beam reinforcement detailing
Show answer
Answer: B. field capacity, wilting point and available waterA key association with Soil Moisture is field capacity, wilting point and available water.
Report a mistake

Q40. What is a central principle when applying Soil Moisture in hydrology or water-resources engineering?

  1. Aignore spatial and temporal variability
  2. Bassume all losses are always zero
  3. Csoil moisture links infiltration, ET and runoff response
  4. Dreplace field data with structural load combinations
Show answer
Answer: C. soil moisture links infiltration, ET and runoff responseA central principle is that soil moisture links infiltration, ET and runoff response.
Report a mistake

Q41. An engineer is studying Soil Moisture. Which consideration is most relevant?

  1. Apaint color of laboratory walls
  2. Bvehicle wheel alignment
  3. Creinforcement bar bending schedule only
  4. Dsoil moisture links infiltration, ET and runoff response
Show answer
Answer: D. soil moisture links infiltration, ET and runoff responseThe relevant consideration is that soil moisture links infiltration, ET and runoff response.
Report a mistake

Q42. Which of the following would most reasonably appear in a technical discussion of Soil Moisture?

  1. Afield capacity, wilting point and available water
  2. Bwelding electrode classification only
  3. Cconcrete cover blocks only
  4. Drailway sleeper fastening only
Show answer
Answer: A. field capacity, wilting point and available waterField capacity, wilting point and available water is directly related to Soil Moisture.
Report a mistake

Q43. Why is Soil Moisture important in civil water engineering?

  1. Ait determines steel chemical composition
  2. Bit helps engineers analyze water stored in the unsaturated soil zone
  3. Cit replaces all field measurements
  4. Dit is used only for architectural rendering
Show answer
Answer: B. it helps engineers analyze water stored in the unsaturated soil zoneIt is important because it helps engineers analyze water stored in the unsaturated soil zone.
Report a mistake

Q44. Which statement about Soil Moisture is the most appropriate?

  1. Ait is unrelated to water movement or management
  2. Bit can be evaluated without any assumptions or data
  3. CSoil moisture links infiltration, et and runoff response
  4. Dit applies only to dry structural members
Show answer
Answer: C. Soil moisture links infiltration, et and runoff responseThe most appropriate statement is: soil moisture links infiltration, ET and runoff response.
Report a mistake

Q45. In a hydrologic study, information about Soil Moisture would primarily support which task?

  1. Aselecting a steel weld symbol
  2. Bestimating concrete cover
  3. Cchoosing a building paint system
  4. Dunderstanding or quantifying water stored in the unsaturated soil zone
Show answer
Answer: D. understanding or quantifying water stored in the unsaturated soil zoneIt primarily supports understanding or quantifying water stored in the unsaturated soil zone.
Report a mistake

Q46. When reviewing an analysis involving Soil Moisture, what should be checked first among these choices?

  1. Awhether unrelated structural drawings use the same font
  2. Bwhether the data and assumptions are consistent with the principle that soil moisture links infiltration, ET and runoff response
  3. Cwhether all rainfall is automatically set to zero
  4. Dwhether hydrologic variables have been replaced by traffic counts
Show answer
Answer: B. whether the data and assumptions are consistent with the principle that soil moisture links infiltration, ET and runoff responseThe analysis should be consistent with the governing concept: soil moisture links infiltration, ET and runoff response.
Report a mistake