FSc · Physics (Grade 12)

Unit 7 MCQs

49 solved multiple choice questions with answers.

Q1. A semiconductor diode is formed by

  1. AJoining two metals
  2. BNone
  3. CJoining insulator and conductor
  4. DJoining p-type and n-type semiconductors
Show answer
Answer: D. Joining p-type and n-type semiconductors
Report a mistake

Q2. In a p-n junction, the region free from charge carriers is called

  1. ANeutral region
  2. BForbidden region
  3. CDepletion region
  4. DActive region
Show answer
Answer: C. Depletion region
Report a mistake

Q3. In forward bias of a diode

  1. ANo current flows
  2. Bp-side is connected to positive terminal
  3. Cn-side is connected to positive terminal
  4. DBoth sides at same potential
Show answer
Answer: B. p-side is connected to positive terminal
Report a mistake

Q4. In reverse bias of a diode

  1. An-side is connected to negative terminal
  2. BCurrent is large
  3. CDepletion region decreases
  4. Dp-side is connected to negative terminal
Show answer
Answer: D. p-side is connected to negative terminal
Report a mistake

Q5. The knee voltage for silicon diode is approximately

  1. A0.7 V
  2. B1.1 V
  3. C0.1 V
  4. D0.3 V
Show answer
Answer: A. 0.7 V
Report a mistake

Q6. The knee voltage for germanium diode is approximately

  1. A1.1 V
  2. B0.1 V
  3. C0.3 V
  4. D0.7 V
Show answer
Answer: C. 0.3 V
Report a mistake

Q7. A diode can be used as

  1. AOscillator
  2. BAmplifier
  3. CAll of these
  4. DRectifier
Show answer
Answer: D. Rectifier
Report a mistake

Q8. In half-wave rectifier, the output frequency is

  1. ASame as input frequency
  2. BHalf the input frequency
  3. CZero
  4. DTwice the input frequency
Show answer
Answer: A. Same as input frequency
Report a mistake

Q9. In full-wave rectifier, the output frequency is

  1. ASame as input frequency
  2. BTwice the input frequency
  3. CHalf the input frequency
  4. DZero
Show answer
Answer: B. Twice the input frequency
Report a mistake

Q10. A transistor has

  1. AOne terminal
  2. BThree terminals
  3. CFour terminals
  4. DTwo terminals
Show answer
Answer: B. Three terminals
Report a mistake

Q11. The three regions of a transistor are

  1. AEmitter, Base, Collector
  2. BAnode, Cathode, Gate
  3. CNone
  4. DSource, Drain, Gate
Show answer
Answer: A. Emitter, Base, Collector
Report a mistake

Q12. In a common-emitter amplifier, the phase difference between input and output is

  1. A90°
  2. B180°
  3. C0°
  4. D45°
Show answer
Answer: B. 180°
Report a mistake

Q13. The barrier potential in a silicon p-n junction is about

  1. A1.1 V
  2. B0.7 V
  3. C0.3 V
  4. D0 V
Show answer
Answer: B. 0.7 V
Report a mistake

Q14. When a diode is forward biased, the depletion region

  1. ARemains same
  2. BBecomes zero
  3. CDecreases
  4. DIncreases
Show answer
Answer: C. Decreases
Report a mistake

Q15. When a diode is reverse biased, the depletion region

  1. AIncreases
  2. BDecreases
  3. CRemains same
  4. DBecomes zero
Show answer
Answer: A. Increases
Report a mistake

Q16. Reverse saturation current in a diode is due to

  1. ABoth
  2. BMajority carriers
  3. CNone
  4. DMinority carriers
Show answer
Answer: D. Minority carriers
Report a mistake

Q17. Zener diode is used as

  1. AAmplifier
  2. BOscillator
  3. CRectifier only
  4. DVoltage regulator
Show answer
Answer: D. Voltage regulator
Report a mistake

Q18. Zener diode operates in

  1. AReverse breakdown region
  2. BBoth
  3. CNone
  4. DForward region
Show answer
Answer: A. Reverse breakdown region
Report a mistake

Q19. Light Emitting Diode (LED) emits light when

  1. AUnbiased
  2. BReverse biased
  3. CAt breakdown
  4. DForward biased
Show answer
Answer: D. Forward biased
Report a mistake

Q20. Photodiode operates in

  1. AForward bias
  2. BBoth
  3. CReverse bias
  4. DNone
Show answer
Answer: C. Reverse bias
Report a mistake

Q21. Solar cell is a

  1. AZener diode
  2. BLED
  3. CPhotodiode used in photovoltaic mode
  4. DTransistor
Show answer
Answer: C. Photodiode used in photovoltaic mode
Report a mistake

Q22. The efficiency of a half-wave rectifier is

  1. A100%
  2. B81.2%
  3. C40.6%
  4. D50%
Show answer
Answer: C. 40.6%
Report a mistake

Q23. The efficiency of a full-wave rectifier is

  1. A50%
  2. B100%
  3. C40.6%
  4. D81.2%
Show answer
Answer: D. 81.2%
Report a mistake

Q24. Ripple factor of half-wave rectifier is

  1. A0.1
  2. B0.48
  3. C1.21
  4. DZero
Show answer
Answer: C. 1.21
Report a mistake

Q25. Ripple factor of full-wave rectifier is

  1. A0.1
  2. B1.21
  3. CZero
  4. D0.48
Show answer
Answer: D. 0.48
Report a mistake

Q26. In a centre-tap full-wave rectifier, the number of diodes used is

  1. A2
  2. B4
  3. C1
  4. D3
Show answer
Answer: A. 2
Report a mistake

Q27. In a bridge full-wave rectifier, the number of diodes used is

  1. A3
  2. B4
  3. C2
  4. D1
Show answer
Answer: B. 4
Report a mistake

Q28. A transistor can be used as

  1. ASwitch
  2. BAll of these
  3. CAmplifier
  4. DOscillator
Show answer
Answer: B. All of these
Report a mistake

Q29. In a transistor, the most heavily doped region is

  1. ABase
  2. BAll equal
  3. CEmitter
  4. DCollector
Show answer
Answer: C. Emitter
Report a mistake

Q30. In a transistor, the thinnest region is

  1. AEmitter
  2. BCollector
  3. CAll equal
  4. DBase
Show answer
Answer: D. Base
Report a mistake

Q31. Current amplification factor β is

  1. AI_E / I_B
  2. BI_C / I_E
  3. CI_C / I_B
  4. DI_B / I_C
Show answer
Answer: C. I_C / I_B
Report a mistake

Q32. The relation between α and β is

  1. Aβ = α / (1 + α)
  2. Bβ = α / (1 – α)
  3. Cα = β / (1 – β)
  4. DBoth a & correct form
Show answer
Answer: B. β = α / (1 – α)
Report a mistake

Q33. In common-base configuration, the input is applied between

  1. ACollector and Base
  2. BEmitter and Collector
  3. CNone
  4. DEmitter and Base
Show answer
Answer: D. Emitter and Base
Report a mistake

Q34. In common-emitter configuration, the input is applied between

  1. ACollector and Emitter
  2. BBase and Emitter
  3. CNone
  4. DBase and Collector
Show answer
Answer: B. Base and Emitter
Report a mistake

Q35. In common-collector configuration, the input is applied between

  1. ABase and Collector
  2. BEmitter and Collector
  3. CBase and Emitter
  4. DNone
Show answer
Answer: A. Base and Collector
Report a mistake

Q36. The configuration with highest current gain is

  1. ACommon-base
  2. BAll equal
  3. CCommon-emitter
  4. DCommon-collector
Show answer
Answer: C. Common-emitter
Report a mistake

Q37. The configuration with highest voltage gain is

  1. ACommon-emitter
  2. BCommon-base
  3. CCommon-collector
  4. DAll equal
Show answer
Answer: A. Common-emitter
Report a mistake

Q38. The configuration used for impedance matching is

  1. ACommon-base
  2. BNone
  3. CCommon-collector
  4. DCommon-emitter
Show answer
Answer: C. Common-collector
Report a mistake

Q39. An operational amplifier (Op-Amp) has

  1. AAll of these
  2. BHigh input impedance
  3. CHigh voltage gain
  4. DLow output impedance
Show answer
Answer: A. All of these
Report a mistake

Q40. The ideal Op-Amp has

  1. AAll of these
  2. BInfinite input impedance
  3. CZero output impedance
  4. DInfinite open-loop gain
Show answer
Answer: A. All of these
Report a mistake

Q41. In an inverting amplifier using Op-Amp, the gain is

  1. AR_f / R_in
  2. B–R_f / R_in
  3. C–(1 + R_f / R_in)
  4. D1 + R_f / R_in
Show answer
Answer: B. –R_f / R_in
Report a mistake

Q42. In a non-inverting amplifier using Op-Amp, the gain is

  1. AR_f / R_in
  2. B–R_f / R_in
  3. C1 + R_f / R_in
  4. D–(1 + R_f / R_in)
Show answer
Answer: C. 1 + R_f / R_in
Report a mistake

Q43. Logic gates are the building blocks of

  1. AAnalog circuits
  2. BDigital circuits
  3. CBoth
  4. DNone
Show answer
Answer: B. Digital circuits
Report a mistake

Q44. The output of an AND gate is high when

  1. AAny input is low
  2. BAll inputs are high
  3. CAll inputs are low
  4. DAny input is high
Show answer
Answer: B. All inputs are high
Report a mistake

Q45. The output of an OR gate is high when

  1. ANone
  2. BAll inputs are low
  3. CAll inputs are high
  4. DAny input is high
Show answer
Answer: D. Any input is high
Report a mistake

Q46. The output of a NOT gate is

  1. AInverse of input
  2. BSame as input
  3. CAlways low
  4. DAlways high
Show answer
Answer: A. Inverse of input
Report a mistake

Q47. NAND gate is a combination of

  1. AOR followed by NOT
  2. BAND followed by NOT
  3. CNOT followed by AND
  4. DNone
Show answer
Answer: B. AND followed by NOT
Report a mistake

Q48. NOR gate is a combination of

  1. AOR followed by NOT
  2. BNone
  3. CNOT followed by OR
  4. DAND followed by NOT
Show answer
Answer: A. OR followed by NOT
Report a mistake

Q49. The universal gates are

  1. AXOR and XNOR
  2. BNOT and AND
  3. CAND and OR
  4. DNAND and NOR
Show answer
Answer: D. NAND and NOR
Report a mistake