General Knowledge · Everyday Science

Unit 5: Sound & Waves MCQs

100 solved multiple choice questions with answers and short explanations.

Q1. Which description correctly matches electric current?

  1. Amaterial through which electric charge moves readily
  2. Bdevice that converts chemical energy into electrical energy
  3. Crate of flow of electric charge
  4. DSI unit of electric current
Show answer
Answer: C. rate of flow of electric chargeelectric current is correctly associated with rate of flow of electric charge.
Report a mistake

Q2. What is ampere best associated with?

  1. Acircuit with multiple branches
  2. Bmaterial that strongly resists electric current
  3. CSI unit of electric current
  4. Dcircuit with components along a single current path
Show answer
Answer: C. SI unit of electric currentampere is correctly associated with SI unit of electric current.
Report a mistake

Q3. Which scientific fact about circuit is accurate?

  1. Acircuit with multiple branches
  2. Bmaterial that strongly resists electric current
  3. Cclosed path through which electric current can flow
  4. Ddevice used to open or close an electric circuit
Show answer
Answer: C. closed path through which electric current can flowcircuit is correctly associated with closed path through which electric current can flow.
Report a mistake

Q4. Choose the statement that correctly describes battery.

  1. Adevice that converts chemical energy into electrical energy
  2. Bclosed path through which electric current can flow
  3. Cmaterial that strongly resists electric current
  4. Dmaterial through which electric charge moves readily
Show answer
Answer: A. device that converts chemical energy into electrical energybattery is correctly associated with device that converts chemical energy into electrical energy.
Report a mistake

Q5. In everyday science, switch is most closely linked to what?

  1. Adevice used to open or close an electric circuit
  2. BSI unit of electric current
  3. Crate of flow of electric charge
  4. Ddevice that converts chemical energy into electrical energy
Show answer
Answer: A. device used to open or close an electric circuitswitch is correctly associated with device used to open or close an electric circuit.
Report a mistake

Q6. Which option best explains conductor?

  1. Arate of flow of electric charge
  2. Bcircuit with components along a single current path
  3. CSI unit of electric current
  4. Dmaterial through which electric charge moves readily
Show answer
Answer: D. material through which electric charge moves readilyconductor is correctly associated with material through which electric charge moves readily.
Report a mistake

Q7. What should a student remember about insulator?

  1. Amaterial that strongly resists electric current
  2. Bclosed path through which electric current can flow
  3. Ccircuit with components along a single current path
  4. Dmaterial through which electric charge moves readily
Show answer
Answer: A. material that strongly resists electric currentinsulator is correctly associated with material that strongly resists electric current.
Report a mistake

Q8. Which of these is correctly connected with series circuit?

  1. Adevice that converts chemical energy into electrical energy
  2. Bcircuit with components along a single current path
  3. Crate of flow of electric charge
  4. Dmaterial that strongly resists electric current
Show answer
Answer: B. circuit with components along a single current pathseries circuit is correctly associated with circuit with components along a single current path.
Report a mistake

Q9. Which statement identifies parallel circuit correctly?

  1. Acircuit with multiple branches
  2. BSI unit of electric current
  3. Cmaterial that strongly resists electric current
  4. Dcircuit with components along a single current path
Show answer
Answer: A. circuit with multiple branchesparallel circuit is correctly associated with circuit with multiple branches.
Report a mistake

Q10. What is the correct scientific association for fuse?

  1. Acircuit with multiple branches
  2. BSI unit of electric current
  3. Cdevice used to open or close an electric circuit
  4. Dsafety device designed to melt when current becomes excessive
Show answer
Answer: D. safety device designed to melt when current becomes excessivefuse is correctly associated with safety device designed to melt when current becomes excessive.
Report a mistake

Q11. Which term in Electric Current & Circuits fits this description: rate of flow of electric charge?

  1. Aampere
  2. Bbattery
  3. Celectric current
  4. Dconductor
Show answer
Answer: C. electric currentThe description refers to electric current.
Report a mistake

Q12. Which pair is correctly matched in Electric Current & Circuits?

  1. Ainsulator — rate of flow of electric charge
  2. Bampere — SI unit of electric current
  3. Cseries circuit — SI unit of electric current
  4. Dfuse — device that converts chemical energy into electrical energy
Show answer
Answer: B. ampere — SI unit of electric currentThe correct match is ampere — SI unit of electric current.
Report a mistake

Q13. Which association is NOT scientifically correct in Electric Current & Circuits?

  1. Aswitch — device used to open or close an electric circuit
  2. Bbattery — device that converts chemical energy into electrical energy
  3. Ccircuit — circuit with components along a single current path
  4. Dconductor — material through which electric charge moves readily
Show answer
Answer: C. circuit — circuit with components along a single current pathcircuit should be associated with closed path through which electric current can flow, not circuit with components along a single current path.
Report a mistake

Q14. Which statement is accurate about Electric Current & Circuits?

  1. Aconductor is associated with circuit with multiple branches.
  2. Bfuse is associated with closed path through which electric current can flow.
  3. Cseries circuit is associated with rate of flow of electric charge.
  4. Dbattery is associated with device that converts chemical energy into electrical energy.
Show answer
Answer: D. battery is associated with device that converts chemical energy into electrical energy.battery is associated with device that converts chemical energy into electrical energy.
Report a mistake

Q15. You observe or read: 'device used to open or close an electric circuit'. Which scientific term or object best matches it?

  1. Aswitch
  2. Belectric current
  3. Cseries circuit
  4. Dinsulator
Show answer
Answer: A. switchThe description identifies switch.
Report a mistake

Q16. Which term in Electric Current & Circuits fits this description: material through which electric charge moves readily?

  1. Aconductor
  2. Bfuse
  3. Celectric current
  4. Dseries circuit
Show answer
Answer: A. conductorThe description refers to conductor.
Report a mistake

Q17. Focusing on insulator, which pair is correctly matched in Electric Current & Circuits?

  1. Aconductor — device used to open or close an electric circuit
  2. Binsulator — material that strongly resists electric current
  3. Ccircuit — SI unit of electric current
  4. Dparallel circuit — circuit with components along a single current path
Show answer
Answer: B. insulator — material that strongly resists electric currentThe correct match is insulator — material that strongly resists electric current.
Report a mistake

Q18. Focusing on series circuit, which association is NOT scientifically correct in Electric Current & Circuits?

  1. Aseries circuit — closed path through which electric current can flow
  2. Bfuse — safety device designed to melt when current becomes excessive
  3. Celectric current — rate of flow of electric charge
  4. Dparallel circuit — circuit with multiple branches
Show answer
Answer: A. series circuit — closed path through which electric current can flowseries circuit should be associated with circuit with components along a single current path, not closed path through which electric current can flow.
Report a mistake

Q19. Focusing on parallel circuit, which statement is accurate about Electric Current & Circuits?

  1. Aelectric current is associated with device that converts chemical energy into electrical energy.
  2. Bparallel circuit is associated with circuit with multiple branches.
  3. Cswitch is associated with circuit with components along a single current path.
  4. Dcircuit is associated with material through which electric charge moves readily.
Show answer
Answer: B. parallel circuit is associated with circuit with multiple branches.parallel circuit is associated with circuit with multiple branches.
Report a mistake

Q20. You observe or read: 'safety device designed to melt when current becomes excessive'. Which scientific term or object best matches it?

  1. Afuse
  2. Bseries circuit
  3. Ccircuit
  4. Dampere
Show answer
Answer: A. fuseThe description identifies fuse.
Report a mistake

Q21. Which description correctly matches voltage?

  1. Ainstrument that can measure quantities such as voltage, current and resistance
  2. Belectric potential difference between two points
  3. Ccomponent used to limit or control current
  4. Dcondition that reduces current for a fixed voltage
Show answer
Answer: B. electric potential difference between two pointsvoltage is correctly associated with electric potential difference between two points.
Report a mistake

Q22. What is volt best associated with?

  1. ASI unit of electrical resistance
  2. Binstrument used to measure potential difference
  3. CSI unit of potential difference
  4. Dcondition that reduces current for a fixed voltage
Show answer
Answer: C. SI unit of potential differencevolt is correctly associated with SI unit of potential difference.
Report a mistake

Q23. Which scientific fact about resistance is accurate?

  1. Acomponent used to limit or control current
  2. Brelationship V = IR for ohmic conductors under constant physical conditions
  3. Copposition to electric current
  4. Dinstrument used to measure electric current
Show answer
Answer: C. opposition to electric currentresistance is correctly associated with opposition to electric current.
Report a mistake

Q24. Choose the statement that correctly describes ohm.

  1. Acomponent used to limit or control current
  2. Brelationship V = IR for ohmic conductors under constant physical conditions
  3. CSI unit of electrical resistance
  4. Dopposition to electric current
Show answer
Answer: C. SI unit of electrical resistanceohm is correctly associated with SI unit of electrical resistance.
Report a mistake

Q25. In everyday science, Ohm's law is most closely linked to what?

  1. ASI unit of potential difference
  2. Belectric potential difference between two points
  3. Crelationship V = IR for ohmic conductors under constant physical conditions
  4. Dinstrument used to measure electric current
Show answer
Answer: C. relationship V = IR for ohmic conductors under constant physical conditionsOhm's law is correctly associated with relationship V = IR for ohmic conductors under constant physical conditions.
Report a mistake

Q26. Which option best explains resistor?

  1. Arelationship V = IR for ohmic conductors under constant physical conditions
  2. Bcomponent used to limit or control current
  3. Cinstrument used to measure potential difference
  4. DSI unit of electrical resistance
Show answer
Answer: B. component used to limit or control currentresistor is correctly associated with component used to limit or control current.
Report a mistake

Q27. What should a student remember about ammeter?

  1. Ainstrument that can measure quantities such as voltage, current and resistance
  2. Bcomponent used to limit or control current
  3. Copposition to electric current
  4. Dinstrument used to measure electric current
Show answer
Answer: D. instrument used to measure electric currentammeter is correctly associated with instrument used to measure electric current.
Report a mistake

Q28. Which of these is correctly connected with voltmeter?

  1. Ainstrument that can measure quantities such as voltage, current and resistance
  2. Belectric potential difference between two points
  3. Cinstrument used to measure potential difference
  4. DSI unit of potential difference
Show answer
Answer: C. instrument used to measure potential differencevoltmeter is correctly associated with instrument used to measure potential difference.
Report a mistake

Q29. Which statement identifies high resistance correctly?

  1. ASI unit of potential difference
  2. Bcondition that reduces current for a fixed voltage
  3. Cinstrument that can measure quantities such as voltage, current and resistance
  4. DSI unit of electrical resistance
Show answer
Answer: B. condition that reduces current for a fixed voltagehigh resistance is correctly associated with condition that reduces current for a fixed voltage.
Report a mistake

Q30. What is the correct scientific association for multimeter?

  1. Acondition that reduces current for a fixed voltage
  2. BSI unit of potential difference
  3. Cinstrument that can measure quantities such as voltage, current and resistance
  4. Dcomponent used to limit or control current
Show answer
Answer: C. instrument that can measure quantities such as voltage, current and resistancemultimeter is correctly associated with instrument that can measure quantities such as voltage, current and resistance.
Report a mistake

Q31. Which term in Voltage & Resistance fits this description: electric potential difference between two points?

  1. Avoltage
  2. Bvoltmeter
  3. Cmultimeter
  4. Dresistor
Show answer
Answer: A. voltageThe description refers to voltage.
Report a mistake

Q32. Which pair is correctly matched in Voltage & Resistance?

  1. Aohm — instrument used to measure potential difference
  2. Bresistance — instrument used to measure electric current
  3. Cvolt — SI unit of potential difference
  4. Dvoltage — relationship V = IR for ohmic conductors under constant physical conditions
Show answer
Answer: C. volt — SI unit of potential differenceThe correct match is volt — SI unit of potential difference.
Report a mistake

Q33. Which association is NOT scientifically correct in Voltage & Resistance?

  1. Aresistor — component used to limit or control current
  2. Bresistance — instrument used to measure potential difference
  3. COhm's law — relationship V = IR for ohmic conductors under constant physical conditions
  4. Dohm — SI unit of electrical resistance
Show answer
Answer: B. resistance — instrument used to measure potential differenceresistance should be associated with opposition to electric current, not instrument used to measure potential difference.
Report a mistake

Q34. Which statement is accurate about Voltage & Resistance?

  1. Avoltmeter is associated with electric potential difference between two points.
  2. Bresistor is associated with condition that reduces current for a fixed voltage.
  3. Cohm is associated with SI unit of electrical resistance.
  4. Dmultimeter is associated with opposition to electric current.
Show answer
Answer: C. ohm is associated with SI unit of electrical resistance.ohm is associated with SI unit of electrical resistance.
Report a mistake

Q35. You observe or read: 'relationship V = IR for ohmic conductors under constant physical conditions'. Which scientific term or object best matches it?

  1. Aammeter
  2. BOhm's law
  3. Cvoltmeter
  4. Dvolt
Show answer
Answer: B. Ohm's lawThe description identifies Ohm's law.
Report a mistake

Q36. Which term in Voltage & Resistance fits this description: component used to limit or control current?

  1. Aresistor
  2. BOhm's law
  3. Cresistance
  4. Dvolt
Show answer
Answer: A. resistorThe description refers to resistor.
Report a mistake

Q37. Focusing on ammeter, which pair is correctly matched in Voltage & Resistance?

  1. Ahigh resistance — instrument used to measure potential difference
  2. Bmultimeter — condition that reduces current for a fixed voltage
  3. Cammeter — instrument used to measure electric current
  4. Dresistor — relationship V = IR for ohmic conductors under constant physical conditions
Show answer
Answer: C. ammeter — instrument used to measure electric currentThe correct match is ammeter — instrument used to measure electric current.
Report a mistake

Q38. Focusing on voltmeter, which association is NOT scientifically correct in Voltage & Resistance?

  1. Avoltmeter — opposition to electric current
  2. Bhigh resistance — condition that reduces current for a fixed voltage
  3. Cvoltage — electric potential difference between two points
  4. Dmultimeter — instrument that can measure quantities such as voltage, current and resistance
Show answer
Answer: A. voltmeter — opposition to electric currentvoltmeter should be associated with instrument used to measure potential difference, not opposition to electric current.
Report a mistake

Q39. Focusing on high resistance, which statement is accurate about Voltage & Resistance?

  1. Aresistance is associated with component used to limit or control current.
  2. Bhigh resistance is associated with condition that reduces current for a fixed voltage.
  3. Cvoltage is associated with SI unit of electrical resistance.
  4. DOhm's law is associated with instrument used to measure potential difference.
Show answer
Answer: B. high resistance is associated with condition that reduces current for a fixed voltage.high resistance is associated with condition that reduces current for a fixed voltage.
Report a mistake

Q40. You observe or read: 'instrument that can measure quantities such as voltage, current and resistance'. Which scientific term or object best matches it?

  1. Amultimeter
  2. Bohm
  3. Cresistance
  4. Dhigh resistance
Show answer
Answer: A. multimeterThe description identifies multimeter.
Report a mistake

Q41. Which description correctly matches alternating current?

  1. Atype of current supplied by typical household mains
  2. Breusable protective device that opens a circuit during excessive current
  3. Creturn conductor maintained near earth potential in normal systems
  4. Dcondition where excessive current is drawn from a circuit
Show answer
Answer: A. type of current supplied by typical household mainsalternating current is correctly associated with type of current supplied by typical household mains.
Report a mistake

Q42. What is circuit breaker best associated with?

  1. Areusable protective device that opens a circuit during excessive current
  2. Breturn conductor maintained near earth potential in normal systems
  3. Ctype of current supplied by typical household mains
  4. Dconductor carrying alternating potential relative to neutral
Show answer
Answer: A. reusable protective device that opens a circuit during excessive currentcircuit breaker is correctly associated with reusable protective device that opens a circuit during excessive current.
Report a mistake

Q43. Which scientific fact about earthing is accurate?

  1. Adevice measuring household electrical energy use
  2. Bcondition where excessive current is drawn from a circuit
  3. Creturn conductor maintained near earth potential in normal systems
  4. Dsafety connection providing a low-resistance path to ground
Show answer
Answer: D. safety connection providing a low-resistance path to groundearthing is correctly associated with safety connection providing a low-resistance path to ground.
Report a mistake

Q44. Choose the statement that correctly describes three-pin plug.

  1. Asafety connection providing a low-resistance path to ground
  2. Bcondition where excessive current is drawn from a circuit
  3. Ccommercial unit of electrical energy
  4. Dplug design commonly providing live, neutral and earth connections
Show answer
Answer: D. plug design commonly providing live, neutral and earth connectionsthree-pin plug is correctly associated with plug design commonly providing live, neutral and earth connections.
Report a mistake

Q45. In everyday science, kilowatt-hour is most closely linked to what?

  1. Areusable protective device that opens a circuit during excessive current
  2. Bconductor carrying alternating potential relative to neutral
  3. Ccommercial unit of electrical energy
  4. Dreturn conductor maintained near earth potential in normal systems
Show answer
Answer: C. commercial unit of electrical energykilowatt-hour is correctly associated with commercial unit of electrical energy.
Report a mistake

Q46. Which option best explains electric meter?

  1. Adevice measuring household electrical energy use
  2. Bsafety connection providing a low-resistance path to ground
  3. Ccondition where excessive current is drawn from a circuit
  4. Darrangement allowing household appliances to operate independently
Show answer
Answer: A. device measuring household electrical energy useelectric meter is correctly associated with device measuring household electrical energy use.
Report a mistake

Q47. What should a student remember about parallel wiring?

  1. Areusable protective device that opens a circuit during excessive current
  2. Bconductor carrying alternating potential relative to neutral
  3. Carrangement allowing household appliances to operate independently
  4. Dcommercial unit of electrical energy
Show answer
Answer: C. arrangement allowing household appliances to operate independentlyparallel wiring is correctly associated with arrangement allowing household appliances to operate independently.
Report a mistake

Q48. Which of these is correctly connected with live wire?

  1. Areusable protective device that opens a circuit during excessive current
  2. Bsafety connection providing a low-resistance path to ground
  3. Cplug design commonly providing live, neutral and earth connections
  4. Dconductor carrying alternating potential relative to neutral
Show answer
Answer: D. conductor carrying alternating potential relative to neutrallive wire is correctly associated with conductor carrying alternating potential relative to neutral.
Report a mistake

Q49. Which statement identifies neutral wire correctly?

  1. Areusable protective device that opens a circuit during excessive current
  2. Bcommercial unit of electrical energy
  3. Cdevice measuring household electrical energy use
  4. Dreturn conductor maintained near earth potential in normal systems
Show answer
Answer: D. return conductor maintained near earth potential in normal systemsneutral wire is correctly associated with return conductor maintained near earth potential in normal systems.
Report a mistake

Q50. What is the correct scientific association for overloading?

  1. Areturn conductor maintained near earth potential in normal systems
  2. Breusable protective device that opens a circuit during excessive current
  3. Ccondition where excessive current is drawn from a circuit
  4. Dsafety connection providing a low-resistance path to ground
Show answer
Answer: C. condition where excessive current is drawn from a circuitoverloading is correctly associated with condition where excessive current is drawn from a circuit.
Report a mistake

Q51. Which term in Household Electricity fits this description: type of current supplied by typical household mains?

  1. Aalternating current
  2. Bkilowatt-hour
  3. Ccircuit breaker
  4. Dparallel wiring
Show answer
Answer: A. alternating currentThe description refers to alternating current.
Report a mistake

Q52. Which pair is correctly matched in Household Electricity?

  1. Acircuit breaker — reusable protective device that opens a circuit during excessive current
  2. Bkilowatt-hour — return conductor maintained near earth potential in normal systems
  3. Cneutral wire — safety connection providing a low-resistance path to ground
  4. Dlive wire — reusable protective device that opens a circuit during excessive current
Show answer
Answer: A. circuit breaker — reusable protective device that opens a circuit during excessive currentThe correct match is circuit breaker — reusable protective device that opens a circuit during excessive current.
Report a mistake

Q53. Which association is NOT scientifically correct in Household Electricity?

  1. Akilowatt-hour — commercial unit of electrical energy
  2. Belectric meter — device measuring household electrical energy use
  3. Cearthing — conductor carrying alternating potential relative to neutral
  4. Dthree-pin plug — plug design commonly providing live, neutral and earth connections
Show answer
Answer: C. earthing — conductor carrying alternating potential relative to neutralearthing should be associated with safety connection providing a low-resistance path to ground, not conductor carrying alternating potential relative to neutral.
Report a mistake

Q54. Which statement is accurate about Household Electricity?

  1. Athree-pin plug is associated with plug design commonly providing live, neutral and earth connections.
  2. Belectric meter is associated with return conductor maintained near earth potential in normal systems.
  3. Coverloading is associated with safety connection providing a low-resistance path to ground.
  4. Dlive wire is associated with type of current supplied by typical household mains.
Show answer
Answer: A. three-pin plug is associated with plug design commonly providing live, neutral and earth connections.three-pin plug is associated with plug design commonly providing live, neutral and earth connections.
Report a mistake

Q55. You observe or read: 'commercial unit of electrical energy'. Which scientific term or object best matches it?

  1. Aparallel wiring
  2. Bkilowatt-hour
  3. Cearthing
  4. Dcircuit breaker
Show answer
Answer: B. kilowatt-hourThe description identifies kilowatt-hour.
Report a mistake

Q56. Which term in Household Electricity fits this description: device measuring household electrical energy use?

  1. Aparallel wiring
  2. Belectric meter
  3. Calternating current
  4. Dthree-pin plug
Show answer
Answer: B. electric meterThe description refers to electric meter.
Report a mistake

Q57. Focusing on parallel wiring, which pair is correctly matched in Household Electricity?

  1. Aneutral wire — conductor carrying alternating potential relative to neutral
  2. Blive wire — arrangement allowing household appliances to operate independently
  3. Cparallel wiring — arrangement allowing household appliances to operate independently
  4. Doverloading — return conductor maintained near earth potential in normal systems
Show answer
Answer: C. parallel wiring — arrangement allowing household appliances to operate independentlyThe correct match is parallel wiring — arrangement allowing household appliances to operate independently.
Report a mistake

Q58. Focusing on live wire, which association is NOT scientifically correct in Household Electricity?

  1. Alive wire — safety connection providing a low-resistance path to ground
  2. Boverloading — condition where excessive current is drawn from a circuit
  3. Cneutral wire — return conductor maintained near earth potential in normal systems
  4. Dalternating current — type of current supplied by typical household mains
Show answer
Answer: A. live wire — safety connection providing a low-resistance path to groundlive wire should be associated with conductor carrying alternating potential relative to neutral, not safety connection providing a low-resistance path to ground.
Report a mistake

Q59. Focusing on neutral wire, which statement is accurate about Household Electricity?

  1. Akilowatt-hour is associated with conductor carrying alternating potential relative to neutral.
  2. Bneutral wire is associated with return conductor maintained near earth potential in normal systems.
  3. Calternating current is associated with plug design commonly providing live, neutral and earth connections.
  4. Dearthing is associated with device measuring household electrical energy use.
Show answer
Answer: B. neutral wire is associated with return conductor maintained near earth potential in normal systems.neutral wire is associated with return conductor maintained near earth potential in normal systems.
Report a mistake

Q60. You observe or read: 'condition where excessive current is drawn from a circuit'. Which scientific term or object best matches it?

  1. Aparallel wiring
  2. Belectric meter
  3. Coverloading
  4. Dalternating current
Show answer
Answer: C. overloadingThe description identifies overloading.
Report a mistake

Q61. Which description correctly matches magnet?

  1. Adevice converting electrical energy to mechanical motion
  2. Bobject producing a magnetic field
  3. Cregion in which magnetic forces can act
  4. Dmagnet produced by electric current through a coil
Show answer
Answer: B. object producing a magnetic fieldmagnet is correctly associated with object producing a magnetic field.
Report a mistake

Q62. What is north and south poles best associated with?

  1. Aobject producing a magnetic field
  2. Btwo poles of a conventional magnet
  3. Cregion in which magnetic forces can act
  4. Dmagnet produced by electric current through a coil
Show answer
Answer: B. two poles of a conventional magnetnorth and south poles is correctly associated with two poles of a conventional magnet.
Report a mistake

Q63. Which scientific fact about like poles is accurate?

  1. Amagnetic poles that repel each other
  2. Bmaterial that can strengthen a coil's magnetic field
  3. Cregion in which magnetic forces can act
  4. Ddevice converting electrical energy to mechanical motion
Show answer
Answer: A. magnetic poles that repel each otherlike poles is correctly associated with magnetic poles that repel each other.
Report a mistake

Q64. Choose the statement that correctly describes unlike poles.

  1. Amagnetic poles that repel each other
  2. Bmagnetic poles that attract each other
  3. Ctwo poles of a conventional magnet
  4. Dobject producing a magnetic field
Show answer
Answer: B. magnetic poles that attract each otherunlike poles is correctly associated with magnetic poles that attract each other.
Report a mistake

Q65. In everyday science, electromagnet is most closely linked to what?

  1. Adevice converting mechanical energy to electrical energy
  2. Bmagnetic poles that attract each other
  3. Cmagnet produced by electric current through a coil
  4. Ddevice converting electrical energy to mechanical motion
Show answer
Answer: C. magnet produced by electric current through a coilelectromagnet is correctly associated with magnet produced by electric current through a coil.
Report a mistake

Q66. Which option best explains iron core?

  1. Aregion in which magnetic forces can act
  2. Bmagnetic poles that attract each other
  3. Cmaterial that can strengthen a coil's magnetic field
  4. Dinstrument using a magnetized needle to indicate direction
Show answer
Answer: C. material that can strengthen a coil's magnetic fieldiron core is correctly associated with material that can strengthen a coil's magnetic field.
Report a mistake

Q67. What should a student remember about compass?

  1. Amagnet produced by electric current through a coil
  2. Binstrument using a magnetized needle to indicate direction
  3. Ctwo poles of a conventional magnet
  4. Dobject producing a magnetic field
Show answer
Answer: B. instrument using a magnetized needle to indicate directioncompass is correctly associated with instrument using a magnetized needle to indicate direction.
Report a mistake

Q68. Which of these is correctly connected with magnetic field?

  1. Ainstrument using a magnetized needle to indicate direction
  2. Bregion in which magnetic forces can act
  3. Cmaterial that can strengthen a coil's magnetic field
  4. Dobject producing a magnetic field
Show answer
Answer: B. region in which magnetic forces can actmagnetic field is correctly associated with region in which magnetic forces can act.
Report a mistake

Q69. Which statement identifies electric motor correctly?

  1. Amagnetic poles that attract each other
  2. Bdevice converting mechanical energy to electrical energy
  3. Cdevice converting electrical energy to mechanical motion
  4. Dtwo poles of a conventional magnet
Show answer
Answer: C. device converting electrical energy to mechanical motionelectric motor is correctly associated with device converting electrical energy to mechanical motion.
Report a mistake

Q70. What is the correct scientific association for generator?

  1. Amagnetic poles that attract each other
  2. Bdevice converting mechanical energy to electrical energy
  3. Cinstrument using a magnetized needle to indicate direction
  4. Dobject producing a magnetic field
Show answer
Answer: B. device converting mechanical energy to electrical energygenerator is correctly associated with device converting mechanical energy to electrical energy.
Report a mistake

Q71. Which term in Magnets & Electromagnets fits this description: object producing a magnetic field?

  1. Alike poles
  2. Bmagnet
  3. Cnorth and south poles
  4. Diron core
Show answer
Answer: B. magnetThe description refers to magnet.
Report a mistake

Q72. Which pair is correctly matched in Magnets & Electromagnets?

  1. Aelectric motor — magnetic poles that repel each other
  2. Bnorth and south poles — two poles of a conventional magnet
  3. Celectromagnet — device converting electrical energy to mechanical motion
  4. Diron core — device converting mechanical energy to electrical energy
Show answer
Answer: B. north and south poles — two poles of a conventional magnetThe correct match is north and south poles — two poles of a conventional magnet.
Report a mistake

Q73. Which association is NOT scientifically correct in Magnets & Electromagnets?

  1. Airon core — material that can strengthen a coil's magnetic field
  2. Belectromagnet — magnet produced by electric current through a coil
  3. Clike poles — region in which magnetic forces can act
  4. Dunlike poles — magnetic poles that attract each other
Show answer
Answer: C. like poles — region in which magnetic forces can actlike poles should be associated with magnetic poles that repel each other, not region in which magnetic forces can act.
Report a mistake

Q74. Which statement is accurate about Magnets & Electromagnets?

  1. Amagnetic field is associated with object producing a magnetic field.
  2. Bunlike poles is associated with magnetic poles that attract each other.
  3. Ciron core is associated with device converting electrical energy to mechanical motion.
  4. Dgenerator is associated with magnetic poles that repel each other.
Show answer
Answer: B. unlike poles is associated with magnetic poles that attract each other.unlike poles is associated with magnetic poles that attract each other.
Report a mistake

Q75. You observe or read: 'magnet produced by electric current through a coil'. Which scientific term or object best matches it?

  1. Aelectric motor
  2. Bcompass
  3. Celectromagnet
  4. Dmagnetic field
Show answer
Answer: C. electromagnetThe description identifies electromagnet.
Report a mistake

Q76. Which term in Magnets & Electromagnets fits this description: material that can strengthen a coil's magnetic field?

  1. Acompass
  2. Bgenerator
  3. Clike poles
  4. Diron core
Show answer
Answer: D. iron coreThe description refers to iron core.
Report a mistake

Q77. Focusing on compass, which pair is correctly matched in Magnets & Electromagnets?

  1. Amagnetic field — instrument using a magnetized needle to indicate direction
  2. Blike poles — two poles of a conventional magnet
  3. Celectromagnet — magnetic poles that attract each other
  4. Dcompass — instrument using a magnetized needle to indicate direction
Show answer
Answer: D. compass — instrument using a magnetized needle to indicate directionThe correct match is compass — instrument using a magnetized needle to indicate direction.
Report a mistake

Q78. Focusing on magnetic field, which association is NOT scientifically correct in Magnets & Electromagnets?

  1. Amagnet — object producing a magnetic field
  2. Belectric motor — device converting electrical energy to mechanical motion
  3. Cmagnetic field — magnetic poles that repel each other
  4. Dgenerator — device converting mechanical energy to electrical energy
Show answer
Answer: C. magnetic field — magnetic poles that repel each othermagnetic field should be associated with region in which magnetic forces can act, not magnetic poles that repel each other.
Report a mistake

Q79. Focusing on electric motor, which statement is accurate about Magnets & Electromagnets?

  1. Aelectric motor is associated with device converting electrical energy to mechanical motion.
  2. Bmagnet is associated with magnetic poles that attract each other.
  3. Clike poles is associated with material that can strengthen a coil's magnetic field.
  4. Delectromagnet is associated with region in which magnetic forces can act.
Show answer
Answer: A. electric motor is associated with device converting electrical energy to mechanical motion.electric motor is associated with device converting electrical energy to mechanical motion.
Report a mistake

Q80. You observe or read: 'device converting mechanical energy to electrical energy'. Which scientific term or object best matches it?

  1. Anorth and south poles
  2. Bgenerator
  3. Clike poles
  4. Delectric motor
Show answer
Answer: B. generatorThe description identifies generator.
Report a mistake

Q81. Which description correctly matches dry hands?

  1. Aelectrical hazard that can expose live conductors
  2. Bsafer condition for handling electrical switches than wet hands
  3. Cefficient lighting technology using light-emitting diodes
  4. Dprotective measure connecting exposed conductive parts to earth
Show answer
Answer: B. safer condition for handling electrical switches than wet handsdry hands is correctly associated with safer condition for handling electrical switches than wet hands.
Report a mistake

Q82. What is damaged insulation best associated with?

  1. Aelectrical hazard that can expose live conductors
  2. Bpower consumption specified for an electrical appliance
  3. Csafer condition for handling electrical switches than wet hands
  4. Dlow-resistance unintended path that can cause very high current
Show answer
Answer: A. electrical hazard that can expose live conductorsdamaged insulation is correctly associated with electrical hazard that can expose live conductors.
Report a mistake

Q83. Which scientific fact about RCD is accurate?

  1. Adevice designed to disconnect power when leakage current is detected
  2. Bpower consumption specified for an electrical appliance
  3. Cdevice designed to provide a service using less energy
  4. Delectrical hazard that can expose live conductors
Show answer
Answer: A. device designed to disconnect power when leakage current is detectedRCD is correctly associated with device designed to disconnect power when leakage current is detected.
Report a mistake

Q84. Choose the statement that correctly describes energy-efficient appliance.

  1. Alow-resistance unintended path that can cause very high current
  2. Bpower consumption specified for an electrical appliance
  3. Cprotective measure connecting exposed conductive parts to earth
  4. Ddevice designed to provide a service using less energy
Show answer
Answer: D. device designed to provide a service using less energyenergy-efficient appliance is correctly associated with device designed to provide a service using less energy.
Report a mistake

Q85. In everyday science, LED lamp is most closely linked to what?

  1. Abasic electrical safety practice
  2. Bprotective measure connecting exposed conductive parts to earth
  3. Cdevice designed to disconnect power when leakage current is detected
  4. Defficient lighting technology using light-emitting diodes
Show answer
Answer: D. efficient lighting technology using light-emitting diodesLED lamp is correctly associated with efficient lighting technology using light-emitting diodes.
Report a mistake

Q86. Which option best explains standby power?

  1. Aelectricity consumed by some devices while not actively operating
  2. Belectrical hazard that can expose live conductors
  3. Cbasic electrical safety practice
  4. Ddevice designed to provide a service using less energy
Show answer
Answer: A. electricity consumed by some devices while not actively operatingstandby power is correctly associated with electricity consumed by some devices while not actively operating.
Report a mistake

Q87. What should a student remember about short circuit?

  1. Apower consumption specified for an electrical appliance
  2. Belectricity consumed by some devices while not actively operating
  3. Cbasic electrical safety practice
  4. Dlow-resistance unintended path that can cause very high current
Show answer
Answer: D. low-resistance unintended path that can cause very high currentshort circuit is correctly associated with low-resistance unintended path that can cause very high current.
Report a mistake

Q88. Which of these is correctly connected with grounding?

  1. Adevice designed to provide a service using less energy
  2. Bprotective measure connecting exposed conductive parts to earth
  3. Cefficient lighting technology using light-emitting diodes
  4. Dsafer condition for handling electrical switches than wet hands
Show answer
Answer: B. protective measure connecting exposed conductive parts to earthgrounding is correctly associated with protective measure connecting exposed conductive parts to earth.
Report a mistake

Q89. Which statement identifies rated power correctly?

  1. Aelectricity consumed by some devices while not actively operating
  2. Bpower consumption specified for an electrical appliance
  3. Cdevice designed to disconnect power when leakage current is detected
  4. Dprotective measure connecting exposed conductive parts to earth
Show answer
Answer: B. power consumption specified for an electrical appliancerated power is correctly associated with power consumption specified for an electrical appliance.
Report a mistake

Q90. What is the correct scientific association for unplugging before repair?

  1. Abasic electrical safety practice
  2. Bpower consumption specified for an electrical appliance
  3. Cprotective measure connecting exposed conductive parts to earth
  4. Dlow-resistance unintended path that can cause very high current
Show answer
Answer: A. basic electrical safety practiceunplugging before repair is correctly associated with basic electrical safety practice.
Report a mistake

Q91. Which term in Electrical Safety & Energy Use fits this description: safer condition for handling electrical switches than wet hands?

  1. Aenergy-efficient appliance
  2. Bshort circuit
  3. Cdry hands
  4. Drated power
Show answer
Answer: C. dry handsThe description refers to dry hands.
Report a mistake

Q92. Which pair is correctly matched in Electrical Safety & Energy Use?

  1. Aenergy-efficient appliance — protective measure connecting exposed conductive parts to earth
  2. Bdry hands — efficient lighting technology using light-emitting diodes
  3. Cshort circuit — safer condition for handling electrical switches than wet hands
  4. Ddamaged insulation — electrical hazard that can expose live conductors
Show answer
Answer: D. damaged insulation — electrical hazard that can expose live conductorsThe correct match is damaged insulation — electrical hazard that can expose live conductors.
Report a mistake

Q93. Which association is NOT scientifically correct in Electrical Safety & Energy Use?

  1. ALED lamp — efficient lighting technology using light-emitting diodes
  2. Bstandby power — electricity consumed by some devices while not actively operating
  3. Cenergy-efficient appliance — device designed to provide a service using less energy
  4. DRCD — protective measure connecting exposed conductive parts to earth
Show answer
Answer: D. RCD — protective measure connecting exposed conductive parts to earthRCD should be associated with device designed to disconnect power when leakage current is detected, not protective measure connecting exposed conductive parts to earth.
Report a mistake

Q94. Which statement is accurate about Electrical Safety & Energy Use?

  1. Agrounding is associated with safer condition for handling electrical switches than wet hands.
  2. Bunplugging before repair is associated with device designed to disconnect power when leakage current is detected.
  3. Cenergy-efficient appliance is associated with device designed to provide a service using less energy.
  4. Dstandby power is associated with power consumption specified for an electrical appliance.
Show answer
Answer: C. energy-efficient appliance is associated with device designed to provide a service using less energy.energy-efficient appliance is associated with device designed to provide a service using less energy.
Report a mistake

Q95. You observe or read: 'efficient lighting technology using light-emitting diodes'. Which scientific term or object best matches it?

  1. Aenergy-efficient appliance
  2. BLED lamp
  3. Cunplugging before repair
  4. Drated power
Show answer
Answer: B. LED lampThe description identifies LED lamp.
Report a mistake

Q96. Which term in Electrical Safety & Energy Use fits this description: electricity consumed by some devices while not actively operating?

  1. ARCD
  2. Bstandby power
  3. Cunplugging before repair
  4. Ddamaged insulation
Show answer
Answer: B. standby powerThe description refers to standby power.
Report a mistake

Q97. Focusing on short circuit, which pair is correctly matched in Electrical Safety & Energy Use?

  1. Aunplugging before repair — power consumption specified for an electrical appliance
  2. Bstandby power — efficient lighting technology using light-emitting diodes
  3. Cenergy-efficient appliance — device designed to disconnect power when leakage current is detected
  4. Dshort circuit — low-resistance unintended path that can cause very high current
Show answer
Answer: D. short circuit — low-resistance unintended path that can cause very high currentThe correct match is short circuit — low-resistance unintended path that can cause very high current.
Report a mistake

Q98. Focusing on grounding, which association is NOT scientifically correct in Electrical Safety & Energy Use?

  1. Arated power — power consumption specified for an electrical appliance
  2. Bgrounding — device designed to disconnect power when leakage current is detected
  3. Cdry hands — safer condition for handling electrical switches than wet hands
  4. Dunplugging before repair — basic electrical safety practice
Show answer
Answer: B. grounding — device designed to disconnect power when leakage current is detectedgrounding should be associated with protective measure connecting exposed conductive parts to earth, not device designed to disconnect power when leakage current is detected.
Report a mistake

Q99. Focusing on rated power, which statement is accurate about Electrical Safety & Energy Use?

  1. Arated power is associated with power consumption specified for an electrical appliance.
  2. Bdry hands is associated with device designed to provide a service using less energy.
  3. CLED lamp is associated with protective measure connecting exposed conductive parts to earth.
  4. DRCD is associated with electricity consumed by some devices while not actively operating.
Show answer
Answer: A. rated power is associated with power consumption specified for an electrical appliance.rated power is associated with power consumption specified for an electrical appliance.
Report a mistake

Q100. You observe or read: 'basic electrical safety practice'. Which scientific term or object best matches it?

  1. Agrounding
  2. Bshort circuit
  3. Cunplugging before repair
  4. Drated power
Show answer
Answer: C. unplugging before repairThe description identifies unplugging before repair.
Report a mistake