General Knowledge · General Science

Unit 1: Physics Fundamentals MCQs

100 solved multiple choice questions with answers and short explanations.

Q1. Which description correctly matches speed?

  1. Adistance travelled per unit time
  2. Brate of change of velocity
  3. Cforce opposing relative motion between surfaces
  4. Dattractive force between masses
Show answer
Answer: A. distance travelled per unit timespeed: distance travelled per unit time.
Report a mistake

Q2. In general science, what is velocity best described as?

  1. Aspeed in a specified direction
  2. Battractive force between masses
  3. Cforce opposing relative motion between surfaces
  4. DSI unit of force
Show answer
Answer: A. speed in a specified directionvelocity: speed in a specified direction.
Report a mistake

Q3. Which statement about acceleration is scientifically correct?

  1. Arate of change of velocity
  2. Bdistance travelled per unit time
  3. Ctendency of an object to resist change in motion
  4. Dattractive force between masses
Show answer
Answer: A. rate of change of velocityacceleration: rate of change of velocity.
Report a mistake

Q4. Choose the fact correctly connected with force.

  1. Adistance travelled per unit time
  2. Bpush or pull that can change motion
  3. Cforce opposing relative motion between surfaces
  4. Dattractive force between masses
Show answer
Answer: B. push or pull that can change motionforce: push or pull that can change motion.
Report a mistake

Q5. A science revision card is headed 'inertia'. Which note belongs under it?

  1. Aforce of gravity acting on an object
  2. BSI unit of force
  3. Cdistance travelled per unit time
  4. Dtendency of an object to resist change in motion
Show answer
Answer: D. tendency of an object to resist change in motioninertia: tendency of an object to resist change in motion.
Report a mistake

Q6. Which option most accurately identifies friction?

  1. Aforce opposing relative motion between surfaces
  2. Bdistance travelled per unit time
  3. Cspeed in a specified direction
  4. Dtendency of an object to resist change in motion
Show answer
Answer: A. force opposing relative motion between surfacesfriction: force opposing relative motion between surfaces.
Report a mistake

Q7. What should a student remember about gravity?

  1. Atendency of an object to resist change in motion
  2. BSI unit of force
  3. Cattractive force between masses
  4. Dspeed in a specified direction
Show answer
Answer: C. attractive force between massesgravity: attractive force between masses.
Report a mistake

Q8. Which scientific association with mass is accurate?

  1. Aforce opposing relative motion between surfaces
  2. Bamount of matter in an object
  3. Cforce of gravity acting on an object
  4. Dpush or pull that can change motion
Show answer
Answer: B. amount of matter in an objectmass: amount of matter in an object.
Report a mistake

Q9. For the topic Motion & Forces, which description of weight should be selected?

  1. Aforce of gravity acting on an object
  2. BSI unit of force
  3. Camount of matter in an object
  4. Drate of change of velocity
Show answer
Answer: A. force of gravity acting on an objectweight: force of gravity acting on an object.
Report a mistake

Q10. Which fact best explains Newton?

  1. Aforce opposing relative motion between surfaces
  2. Bdistance travelled per unit time
  3. Cpush or pull that can change motion
  4. DSI unit of force
Show answer
Answer: D. SI unit of forceNewton: SI unit of force.
Report a mistake

Q11. Identify the scientific term, object or process from this clue: 'distance travelled per unit time'.

  1. Amass
  2. Bforce
  3. Cinertia
  4. Dspeed
Show answer
Answer: D. speedThe clue identifies speed.
Report a mistake

Q12. Which pair is correctly matched in Motion & Forces?

  1. Aforce — attractive force between masses
  2. Bvelocity — speed in a specified direction
  3. CNewton — rate of change of velocity
  4. Dmass — distance travelled per unit time
Show answer
Answer: B. velocity — speed in a specified directionThe correct pair is velocity — speed in a specified direction.
Report a mistake

Q13. A classroom quiz gives this clue: 'rate of change of velocity'. Which answer should be chosen?

  1. Ainertia
  2. Bgravity
  3. Cacceleration
  4. Dfriction
Show answer
Answer: C. accelerationThe correct answer is acceleration.
Report a mistake

Q14. Which scientific match is NOT correct in this set on Motion & Forces?

  1. Agravity — attractive force between masses
  2. Bfriction — force opposing relative motion between surfaces
  3. Cforce — force of gravity acting on an object
  4. Dinertia — tendency of an object to resist change in motion
Show answer
Answer: C. force — force of gravity acting on an objectforce should be matched with push or pull that can change motion.
Report a mistake

Q15. While reviewing Motion & Forces, which statement is accurate?

  1. Amass is associated with speed in a specified direction.
  2. Binertia is associated with tendency of an object to resist change in motion.
  3. CNewton is associated with push or pull that can change motion.
  4. Dfriction is associated with SI unit of force.
Show answer
Answer: B. inertia is associated with tendency of an object to resist change in motion.inertia is associated with tendency of an object to resist change in motion.
Report a mistake

Q16. Identify the scientific term, object or process from this clue: 'force opposing relative motion between surfaces'.

  1. ANewton
  2. Bgravity
  3. Cacceleration
  4. Dfriction
Show answer
Answer: D. frictionThe clue identifies friction.
Report a mistake

Q17. Within Motion & Forces, which pair is correctly matched in Motion & Forces?

  1. Agravity — attractive force between masses
  2. Bspeed — push or pull that can change motion
  3. Cweight — speed in a specified direction
  4. Dinertia — amount of matter in an object
Show answer
Answer: A. gravity — attractive force between massesThe correct pair is gravity — attractive force between masses.
Report a mistake

Q18. A classroom quiz gives this clue: 'amount of matter in an object'. Which answer should be chosen?

  1. Afriction
  2. Bspeed
  3. Cvelocity
  4. Dmass
Show answer
Answer: D. massThe correct answer is mass.
Report a mistake

Q19. Within Motion & Forces, which scientific match is NOT correct in this set on Motion & Forces?

  1. Aweight — push or pull that can change motion
  2. Bvelocity — speed in a specified direction
  3. Cspeed — distance travelled per unit time
  4. DNewton — SI unit of force
Show answer
Answer: A. weight — push or pull that can change motionweight should be matched with force of gravity acting on an object.
Report a mistake

Q20. Within Motion & Forces, while reviewing Motion & Forces, which statement is accurate?

  1. ANewton is associated with SI unit of force.
  2. Binertia is associated with force of gravity acting on an object.
  3. Cspeed is associated with tendency of an object to resist change in motion.
  4. Dacceleration is associated with attractive force between masses.
Show answer
Answer: A. Newton is associated with SI unit of force.Newton is associated with SI unit of force.
Report a mistake

Q21. Which description correctly matches work?

  1. Astored energy due to position or configuration
  2. Bsum of kinetic and potential energy
  3. Cforce multiplied by displacement in the force direction
  4. Ddevice that helps perform work by changing force or motion
Show answer
Answer: C. force multiplied by displacement in the force directionwork: force multiplied by displacement in the force direction.
Report a mistake

Q22. In general science, what is joule best described as?

  1. ASI unit of work and energy
  2. Benergy due to motion
  3. Cstored energy due to position or configuration
  4. Dforce multiplied by displacement in the force direction
Show answer
Answer: A. SI unit of work and energyjoule: SI unit of work and energy.
Report a mistake

Q23. Which statement about power is scientifically correct?

  1. Astored energy due to position or configuration
  2. Brate of doing work
  3. Cforce multiplied by displacement in the force direction
  4. Duseful output divided by total input
Show answer
Answer: B. rate of doing workpower: rate of doing work.
Report a mistake

Q24. Choose the fact correctly connected with watt.

  1. ASI unit of work and energy
  2. BSI unit of power
  3. Cuseful output divided by total input
  4. Drate of doing work
Show answer
Answer: B. SI unit of powerwatt: SI unit of power.
Report a mistake

Q25. A science revision card is headed 'kinetic energy'. Which note belongs under it?

  1. Adevice that helps perform work by changing force or motion
  2. Bstored energy due to position or configuration
  3. Cenergy due to motion
  4. Dsum of kinetic and potential energy
Show answer
Answer: C. energy due to motionkinetic energy: energy due to motion.
Report a mistake

Q26. Which option most accurately identifies potential energy?

  1. Aforce multiplied by displacement in the force direction
  2. Brate of doing work
  3. CSI unit of power
  4. Dstored energy due to position or configuration
Show answer
Answer: D. stored energy due to position or configurationpotential energy: stored energy due to position or configuration.
Report a mistake

Q27. What should a student remember about conservation of energy?

  1. Arate of doing work
  2. Bprinciple that energy changes form but is not created or destroyed
  3. Cuseful output divided by total input
  4. Denergy due to motion
Show answer
Answer: B. principle that energy changes form but is not created or destroyedconservation of energy: principle that energy changes form but is not created or destroyed.
Report a mistake

Q28. Which scientific association with efficiency is accurate?

  1. Auseful output divided by total input
  2. BSI unit of work and energy
  3. Cstored energy due to position or configuration
  4. DSI unit of power
Show answer
Answer: A. useful output divided by total inputefficiency: useful output divided by total input.
Report a mistake

Q29. For the topic Work, Energy & Power, which description of mechanical energy should be selected?

  1. ASI unit of power
  2. Brate of doing work
  3. Cuseful output divided by total input
  4. Dsum of kinetic and potential energy
Show answer
Answer: D. sum of kinetic and potential energymechanical energy: sum of kinetic and potential energy.
Report a mistake

Q30. Which fact best explains machine?

  1. Adevice that helps perform work by changing force or motion
  2. Buseful output divided by total input
  3. Cprinciple that energy changes form but is not created or destroyed
  4. DSI unit of work and energy
Show answer
Answer: A. device that helps perform work by changing force or motionmachine: device that helps perform work by changing force or motion.
Report a mistake

Q31. Identify the scientific term, object or process from this clue: 'force multiplied by displacement in the force direction'.

  1. Awork
  2. Bpower
  3. Cefficiency
  4. Dmechanical energy
Show answer
Answer: A. workThe clue identifies work.
Report a mistake

Q32. Which pair is correctly matched in Work, Energy & Power?

  1. Aefficiency — force multiplied by displacement in the force direction
  2. Bmachine — rate of doing work
  3. Cpotential energy — sum of kinetic and potential energy
  4. Djoule — SI unit of work and energy
Show answer
Answer: D. joule — SI unit of work and energyThe correct pair is joule — SI unit of work and energy.
Report a mistake

Q33. A classroom quiz gives this clue: 'rate of doing work'. Which answer should be chosen?

  1. Amechanical energy
  2. Bmachine
  3. Ckinetic energy
  4. Dpower
Show answer
Answer: D. powerThe correct answer is power.
Report a mistake

Q34. Which scientific match is NOT correct in this set on Work, Energy & Power?

  1. Awatt — sum of kinetic and potential energy
  2. Bpotential energy — stored energy due to position or configuration
  3. Ckinetic energy — energy due to motion
  4. Dconservation of energy — principle that energy changes form but is not created or destroyed
Show answer
Answer: A. watt — sum of kinetic and potential energywatt should be matched with SI unit of power.
Report a mistake

Q35. While reviewing Work, Energy & Power, which statement is accurate?

  1. Aefficiency is associated with SI unit of work and energy.
  2. Bkinetic energy is associated with energy due to motion.
  3. Cmachine is associated with SI unit of power.
  4. Dpotential energy is associated with device that helps perform work by changing force or motion.
Show answer
Answer: B. kinetic energy is associated with energy due to motion.kinetic energy is associated with energy due to motion.
Report a mistake

Q36. Identify the scientific term, object or process from this clue: 'stored energy due to position or configuration'.

  1. Apower
  2. Bkinetic energy
  3. Cpotential energy
  4. Djoule
Show answer
Answer: C. potential energyThe clue identifies potential energy.
Report a mistake

Q37. Within Work, Energy & Power, which pair is correctly matched in Work, Energy & Power?

  1. Apower — stored energy due to position or configuration
  2. Bconservation of energy — principle that energy changes form but is not created or destroyed
  3. Cmechanical energy — SI unit of work and energy
  4. Dwork — SI unit of power
Show answer
Answer: B. conservation of energy — principle that energy changes form but is not created or destroyedThe correct pair is conservation of energy — principle that energy changes form but is not created or destroyed.
Report a mistake

Q38. A classroom quiz gives this clue: 'useful output divided by total input'. Which answer should be chosen?

  1. Aefficiency
  2. Bpotential energy
  3. Cconservation of energy
  4. Djoule
Show answer
Answer: A. efficiencyThe correct answer is efficiency.
Report a mistake

Q39. Within Work, Energy & Power, which scientific match is NOT correct in this set on Work, Energy & Power?

  1. Ajoule — SI unit of work and energy
  2. Bmechanical energy — SI unit of power
  3. Cmachine — device that helps perform work by changing force or motion
  4. Dwork — force multiplied by displacement in the force direction
Show answer
Answer: B. mechanical energy — SI unit of powermechanical energy should be matched with sum of kinetic and potential energy.
Report a mistake

Q40. Within Work, Energy & Power, while reviewing Work, Energy & Power, which statement is accurate?

  1. Awork is associated with energy due to motion.
  2. Bpower is associated with principle that energy changes form but is not created or destroyed.
  3. Cmachine is associated with device that helps perform work by changing force or motion.
  4. Dkinetic energy is associated with sum of kinetic and potential energy.
Show answer
Answer: C. machine is associated with device that helps perform work by changing force or motion.machine is associated with device that helps perform work by changing force or motion.
Report a mistake

Q41. Which description correctly matches temperature?

  1. Aincrease in dimensions caused by heating
  2. Bheat transfer through direct particle interactions
  3. Cheat transfer by bulk movement of a fluid
  4. Dmeasure related to average kinetic energy of particles
Show answer
Answer: D. measure related to average kinetic energy of particlestemperature: measure related to average kinetic energy of particles.
Report a mistake

Q42. In general science, what is heat best described as?

  1. Aenergy transferred because of temperature difference
  2. Benergy needed to raise unit mass by one degree
  3. Cenergy transfer by electromagnetic waves
  4. Dheat transfer through direct particle interactions
Show answer
Answer: A. energy transferred because of temperature differenceheat: energy transferred because of temperature difference.
Report a mistake

Q43. Which statement about conduction is scientifically correct?

  1. ASI thermodynamic temperature scale
  2. Bheat transfer through direct particle interactions
  3. Cmaterial that resists heat transfer
  4. Dincrease in dimensions caused by heating
Show answer
Answer: B. heat transfer through direct particle interactionsconduction: heat transfer through direct particle interactions.
Report a mistake

Q44. Choose the fact correctly connected with convection.

  1. Atemperature scale with water freezing near 0 degrees at standard pressure
  2. Bheat transfer by bulk movement of a fluid
  3. Cmeasure related to average kinetic energy of particles
  4. Dincrease in dimensions caused by heating
Show answer
Answer: B. heat transfer by bulk movement of a fluidconvection: heat transfer by bulk movement of a fluid.
Report a mistake

Q45. A science revision card is headed 'radiation'. Which note belongs under it?

  1. Aenergy transfer by electromagnetic waves
  2. Bmeasure related to average kinetic energy of particles
  3. Cheat transfer by bulk movement of a fluid
  4. Denergy needed to raise unit mass by one degree
Show answer
Answer: A. energy transfer by electromagnetic wavesradiation: energy transfer by electromagnetic waves.
Report a mistake

Q46. Which option most accurately identifies Celsius?

  1. Ameasure related to average kinetic energy of particles
  2. Bmaterial that resists heat transfer
  3. Cenergy transfer by electromagnetic waves
  4. Dtemperature scale with water freezing near 0 degrees at standard pressure
Show answer
Answer: D. temperature scale with water freezing near 0 degrees at standard pressureCelsius: temperature scale with water freezing near 0 degrees at standard pressure.
Report a mistake

Q47. What should a student remember about Kelvin?

  1. ASI thermodynamic temperature scale
  2. Benergy transfer by electromagnetic waves
  3. Cheat transfer through direct particle interactions
  4. Denergy needed to raise unit mass by one degree
Show answer
Answer: A. SI thermodynamic temperature scaleKelvin: SI thermodynamic temperature scale.
Report a mistake

Q48. Which scientific association with thermal expansion is accurate?

  1. Aincrease in dimensions caused by heating
  2. Benergy transfer by electromagnetic waves
  3. Cmeasure related to average kinetic energy of particles
  4. Dheat transfer through direct particle interactions
Show answer
Answer: A. increase in dimensions caused by heatingthermal expansion: increase in dimensions caused by heating.
Report a mistake

Q49. For the topic Heat & Temperature, which description of insulator should be selected?

  1. ASI thermodynamic temperature scale
  2. Benergy transferred because of temperature difference
  3. Cenergy needed to raise unit mass by one degree
  4. Dmaterial that resists heat transfer
Show answer
Answer: D. material that resists heat transferinsulator: material that resists heat transfer.
Report a mistake

Q50. Which fact best explains specific heat capacity?

  1. Ameasure related to average kinetic energy of particles
  2. Benergy needed to raise unit mass by one degree
  3. Cmaterial that resists heat transfer
  4. Dtemperature scale with water freezing near 0 degrees at standard pressure
Show answer
Answer: B. energy needed to raise unit mass by one degreespecific heat capacity: energy needed to raise unit mass by one degree.
Report a mistake

Q51. Identify the scientific term, object or process from this clue: 'measure related to average kinetic energy of particles'.

  1. Aconduction
  2. Bthermal expansion
  3. Ctemperature
  4. Dinsulator
Show answer
Answer: C. temperatureThe clue identifies temperature.
Report a mistake

Q52. Which pair is correctly matched in Heat & Temperature?

  1. Athermal expansion — measure related to average kinetic energy of particles
  2. Bheat — energy transferred because of temperature difference
  3. Cspecific heat capacity — heat transfer through direct particle interactions
  4. Dconvection — SI thermodynamic temperature scale
Show answer
Answer: B. heat — energy transferred because of temperature differenceThe correct pair is heat — energy transferred because of temperature difference.
Report a mistake

Q53. A classroom quiz gives this clue: 'heat transfer through direct particle interactions'. Which answer should be chosen?

  1. Athermal expansion
  2. Binsulator
  3. Cspecific heat capacity
  4. Dconduction
Show answer
Answer: D. conductionThe correct answer is conduction.
Report a mistake

Q54. Which scientific match is NOT correct in this set on Heat & Temperature?

  1. Aconvection — material that resists heat transfer
  2. BCelsius — temperature scale with water freezing near 0 degrees at standard pressure
  3. CKelvin — SI thermodynamic temperature scale
  4. Dradiation — energy transfer by electromagnetic waves
Show answer
Answer: A. convection — material that resists heat transferconvection should be matched with heat transfer by bulk movement of a fluid.
Report a mistake

Q55. While reviewing Heat & Temperature, which statement is accurate?

  1. Athermal expansion is associated with energy transferred because of temperature difference.
  2. BCelsius is associated with energy needed to raise unit mass by one degree.
  3. Cspecific heat capacity is associated with heat transfer by bulk movement of a fluid.
  4. Dradiation is associated with energy transfer by electromagnetic waves.
Show answer
Answer: D. radiation is associated with energy transfer by electromagnetic waves.radiation is associated with energy transfer by electromagnetic waves.
Report a mistake

Q56. Identify the scientific term, object or process from this clue: 'temperature scale with water freezing near 0 degrees at standard pressure'.

  1. Aconduction
  2. Bthermal expansion
  3. CCelsius
  4. DKelvin
Show answer
Answer: C. CelsiusThe clue identifies Celsius.
Report a mistake

Q57. Within Heat & Temperature, which pair is correctly matched in Heat & Temperature?

  1. Aradiation — increase in dimensions caused by heating
  2. Btemperature — heat transfer by bulk movement of a fluid
  3. CKelvin — SI thermodynamic temperature scale
  4. Dconduction — temperature scale with water freezing near 0 degrees at standard pressure
Show answer
Answer: C. Kelvin — SI thermodynamic temperature scaleThe correct pair is Kelvin — SI thermodynamic temperature scale.
Report a mistake

Q58. A classroom quiz gives this clue: 'increase in dimensions caused by heating'. Which answer should be chosen?

  1. ACelsius
  2. Bthermal expansion
  3. Cradiation
  4. Dconduction
Show answer
Answer: B. thermal expansionThe correct answer is thermal expansion.
Report a mistake

Q59. Within Heat & Temperature, which scientific match is NOT correct in this set on Heat & Temperature?

  1. Atemperature — measure related to average kinetic energy of particles
  2. Bheat — energy transferred because of temperature difference
  3. Cspecific heat capacity — energy needed to raise unit mass by one degree
  4. Dinsulator — heat transfer by bulk movement of a fluid
Show answer
Answer: D. insulator — heat transfer by bulk movement of a fluidinsulator should be matched with material that resists heat transfer.
Report a mistake

Q60. Within Heat & Temperature, while reviewing Heat & Temperature, which statement is accurate?

  1. Aspecific heat capacity is associated with energy needed to raise unit mass by one degree.
  2. Bconduction is associated with SI thermodynamic temperature scale.
  3. Cradiation is associated with material that resists heat transfer.
  4. Dtemperature is associated with energy transfer by electromagnetic waves.
Show answer
Answer: A. specific heat capacity is associated with energy needed to raise unit mass by one degree.specific heat capacity is associated with energy needed to raise unit mass by one degree.
Report a mistake

Q61. Which description correctly matches wave?

  1. Amechanical wave requiring a medium
  2. Breflected sound heard separately
  3. Cdisturbance transferring energy
  4. Dsound with frequency above human hearing range
Show answer
Answer: C. disturbance transferring energywave: disturbance transferring energy.
Report a mistake

Q62. In general science, what is frequency best described as?

  1. Asound with frequency above human hearing range
  2. Bmaximum displacement from equilibrium
  3. Cnumber of cycles per second
  4. Dperception mainly related to sound frequency
Show answer
Answer: C. number of cycles per secondfrequency: number of cycles per second.
Report a mistake

Q63. Which statement about hertz is scientifically correct?

  1. Adistance between corresponding points on successive waves
  2. Bmechanical wave requiring a medium
  3. Csound with frequency above human hearing range
  4. DSI unit of frequency
Show answer
Answer: D. SI unit of frequencyhertz: SI unit of frequency.
Report a mistake

Q64. Choose the fact correctly connected with wavelength.

  1. Anumber of cycles per second
  2. BSI unit of frequency
  3. Cdisturbance transferring energy
  4. Ddistance between corresponding points on successive waves
Show answer
Answer: D. distance between corresponding points on successive waveswavelength: distance between corresponding points on successive waves.
Report a mistake

Q65. A science revision card is headed 'amplitude'. Which note belongs under it?

  1. Amechanical wave requiring a medium
  2. Bnumber of cycles per second
  3. Creflected sound heard separately
  4. Dmaximum displacement from equilibrium
Show answer
Answer: D. maximum displacement from equilibriumamplitude: maximum displacement from equilibrium.
Report a mistake

Q66. Which option most accurately identifies sound?

  1. Amechanical wave requiring a medium
  2. Bnumber of cycles per second
  3. Csound with frequency above human hearing range
  4. DSI unit of frequency
Show answer
Answer: A. mechanical wave requiring a mediumsound: mechanical wave requiring a medium.
Report a mistake

Q67. What should a student remember about pitch?

  1. Amechanical wave requiring a medium
  2. Bperception mainly related to sound frequency
  3. Cnumber of cycles per second
  4. Dmaximum displacement from equilibrium
Show answer
Answer: B. perception mainly related to sound frequencypitch: perception mainly related to sound frequency.
Report a mistake

Q68. Which scientific association with loudness is accurate?

  1. Adistance between corresponding points on successive waves
  2. Bsound with frequency above human hearing range
  3. Cdisturbance transferring energy
  4. Dperception related largely to sound intensity
Show answer
Answer: D. perception related largely to sound intensityloudness: perception related largely to sound intensity.
Report a mistake

Q69. For the topic Waves & Sound, which description of echo should be selected?

  1. Aperception related largely to sound intensity
  2. Breflected sound heard separately
  3. CSI unit of frequency
  4. Dperception mainly related to sound frequency
Show answer
Answer: B. reflected sound heard separatelyecho: reflected sound heard separately.
Report a mistake

Q70. Which fact best explains ultrasound?

  1. Adisturbance transferring energy
  2. Bmaximum displacement from equilibrium
  3. Csound with frequency above human hearing range
  4. DSI unit of frequency
Show answer
Answer: C. sound with frequency above human hearing rangeultrasound: sound with frequency above human hearing range.
Report a mistake

Q71. Identify the scientific term, object or process from this clue: 'disturbance transferring energy'.

  1. Ahertz
  2. Bultrasound
  3. Cwave
  4. Dloudness
Show answer
Answer: C. waveThe clue identifies wave.
Report a mistake

Q72. Which pair is correctly matched in Waves & Sound?

  1. Aultrasound — SI unit of frequency
  2. Bwavelength — perception mainly related to sound frequency
  3. Cfrequency — number of cycles per second
  4. Dsound — reflected sound heard separately
Show answer
Answer: C. frequency — number of cycles per secondThe correct pair is frequency — number of cycles per second.
Report a mistake

Q73. A classroom quiz gives this clue: 'SI unit of frequency'. Which answer should be chosen?

  1. Ahertz
  2. Becho
  3. Cpitch
  4. Dwavelength
Show answer
Answer: A. hertzThe correct answer is hertz.
Report a mistake

Q74. Which scientific match is NOT correct in this set on Waves & Sound?

  1. Awavelength — reflected sound heard separately
  2. Bsound — mechanical wave requiring a medium
  3. Cpitch — perception mainly related to sound frequency
  4. Damplitude — maximum displacement from equilibrium
Show answer
Answer: A. wavelength — reflected sound heard separatelywavelength should be matched with distance between corresponding points on successive waves.
Report a mistake

Q75. While reviewing Waves & Sound, which statement is accurate?

  1. Aloudness is associated with number of cycles per second.
  2. Bamplitude is associated with maximum displacement from equilibrium.
  3. Csound is associated with sound with frequency above human hearing range.
  4. Dultrasound is associated with distance between corresponding points on successive waves.
Show answer
Answer: B. amplitude is associated with maximum displacement from equilibrium.amplitude is associated with maximum displacement from equilibrium.
Report a mistake

Q76. Identify the scientific term, object or process from this clue: 'mechanical wave requiring a medium'.

  1. Awavelength
  2. Bsound
  3. Cecho
  4. Dloudness
Show answer
Answer: B. soundThe clue identifies sound.
Report a mistake

Q77. Within Waves & Sound, which pair is correctly matched in Waves & Sound?

  1. Apitch — perception mainly related to sound frequency
  2. Bwave — distance between corresponding points on successive waves
  3. Chertz — mechanical wave requiring a medium
  4. Damplitude — perception related largely to sound intensity
Show answer
Answer: A. pitch — perception mainly related to sound frequencyThe correct pair is pitch — perception mainly related to sound frequency.
Report a mistake

Q78. A classroom quiz gives this clue: 'perception related largely to sound intensity'. Which answer should be chosen?

  1. Afrequency
  2. Becho
  3. Cloudness
  4. Dultrasound
Show answer
Answer: C. loudnessThe correct answer is loudness.
Report a mistake

Q79. Within Waves & Sound, which scientific match is NOT correct in this set on Waves & Sound?

  1. Afrequency — number of cycles per second
  2. Bwave — disturbance transferring energy
  3. Cultrasound — sound with frequency above human hearing range
  4. Decho — distance between corresponding points on successive waves
Show answer
Answer: D. echo — distance between corresponding points on successive wavesecho should be matched with reflected sound heard separately.
Report a mistake

Q80. Within Waves & Sound, while reviewing Waves & Sound, which statement is accurate?

  1. Aultrasound is associated with sound with frequency above human hearing range.
  2. Bamplitude is associated with reflected sound heard separately.
  3. Chertz is associated with perception mainly related to sound frequency.
  4. Dwave is associated with maximum displacement from equilibrium.
Show answer
Answer: A. ultrasound is associated with sound with frequency above human hearing range.ultrasound is associated with sound with frequency above human hearing range.
Report a mistake

Q81. Which description correctly matches reflection?

  1. Abouncing of light from a surface
  2. Btransparent object that can disperse white light
  3. Crange of component colors or wavelengths
  4. Dpoint where converging rays meet
Show answer
Answer: A. bouncing of light from a surfacereflection: bouncing of light from a surface.
Report a mistake

Q82. In general science, what is refraction best described as?

  1. Aelectromagnetic radiation detectable by human eyes
  2. Btransparent object that can disperse white light
  3. Cchange in direction of light when speed changes between media
  4. Dlens that diverges parallel rays
Show answer
Answer: C. change in direction of light when speed changes between mediarefraction: change in direction of light when speed changes between media.
Report a mistake

Q83. Which statement about lens is scientifically correct?

  1. Achange in direction of light when speed changes between media
  2. Btransparent optical element that refracts light
  3. Ctransparent object that can disperse white light
  4. Dsurface designed to reflect light
Show answer
Answer: B. transparent optical element that refracts lightlens: transparent optical element that refracts light.
Report a mistake

Q84. Choose the fact correctly connected with convex lens.

  1. Alens that diverges parallel rays
  2. Blens that converges parallel rays
  3. Crange of component colors or wavelengths
  4. Dtransparent optical element that refracts light
Show answer
Answer: B. lens that converges parallel raysconvex lens: lens that converges parallel rays.
Report a mistake

Q85. A science revision card is headed 'concave lens'. Which note belongs under it?

  1. Atransparent optical element that refracts light
  2. Btransparent object that can disperse white light
  3. Clens that converges parallel rays
  4. Dlens that diverges parallel rays
Show answer
Answer: D. lens that diverges parallel raysconcave lens: lens that diverges parallel rays.
Report a mistake

Q86. Which option most accurately identifies prism?

  1. Alens that diverges parallel rays
  2. Blens that converges parallel rays
  3. Ctransparent object that can disperse white light
  4. Dpoint where converging rays meet
Show answer
Answer: C. transparent object that can disperse white lightprism: transparent object that can disperse white light.
Report a mistake

Q87. What should a student remember about spectrum?

  1. Arange of component colors or wavelengths
  2. Blens that converges parallel rays
  3. Clens that diverges parallel rays
  4. Dpoint where converging rays meet
Show answer
Answer: A. range of component colors or wavelengthsspectrum: range of component colors or wavelengths.
Report a mistake

Q88. Which scientific association with visible light is accurate?

  1. Achange in direction of light when speed changes between media
  2. Belectromagnetic radiation detectable by human eyes
  3. Ctransparent optical element that refracts light
  4. Dpoint where converging rays meet
Show answer
Answer: B. electromagnetic radiation detectable by human eyesvisible light: electromagnetic radiation detectable by human eyes.
Report a mistake

Q89. For the topic Light & Optics, which description of mirror should be selected?

  1. Atransparent optical element that refracts light
  2. Bsurface designed to reflect light
  3. Clens that diverges parallel rays
  4. Dtransparent object that can disperse white light
Show answer
Answer: B. surface designed to reflect lightmirror: surface designed to reflect light.
Report a mistake

Q90. Which fact best explains focal point?

  1. Atransparent object that can disperse white light
  2. Bsurface designed to reflect light
  3. Cpoint where converging rays meet
  4. Dchange in direction of light when speed changes between media
Show answer
Answer: C. point where converging rays meetfocal point: point where converging rays meet.
Report a mistake

Q91. Identify the scientific term, object or process from this clue: 'bouncing of light from a surface'.

  1. Arefraction
  2. Bspectrum
  3. Creflection
  4. Dvisible light
Show answer
Answer: C. reflectionThe clue identifies reflection.
Report a mistake

Q92. Which pair is correctly matched in Light & Optics?

  1. Afocal point — transparent optical element that refracts light
  2. Bprism — surface designed to reflect light
  3. Cconvex lens — range of component colors or wavelengths
  4. Drefraction — change in direction of light when speed changes between media
Show answer
Answer: D. refraction — change in direction of light when speed changes between mediaThe correct pair is refraction — change in direction of light when speed changes between media.
Report a mistake

Q93. A classroom quiz gives this clue: 'transparent optical element that refracts light'. Which answer should be chosen?

  1. Amirror
  2. Bspectrum
  3. Clens
  4. Drefraction
Show answer
Answer: C. lensThe correct answer is lens.
Report a mistake

Q94. Which scientific match is NOT correct in this set on Light & Optics?

  1. Aspectrum — range of component colors or wavelengths
  2. Bconvex lens — surface designed to reflect light
  3. Cconcave lens — lens that diverges parallel rays
  4. Dprism — transparent object that can disperse white light
Show answer
Answer: B. convex lens — surface designed to reflect lightconvex lens should be matched with lens that converges parallel rays.
Report a mistake

Q95. While reviewing Light & Optics, which statement is accurate?

  1. Avisible light is associated with change in direction of light when speed changes between media.
  2. Bfocal point is associated with lens that converges parallel rays.
  3. Cprism is associated with point where converging rays meet.
  4. Dconcave lens is associated with lens that diverges parallel rays.
Show answer
Answer: D. concave lens is associated with lens that diverges parallel rays.concave lens is associated with lens that diverges parallel rays.
Report a mistake

Q96. Identify the scientific term, object or process from this clue: 'transparent object that can disperse white light'.

  1. Aprism
  2. Breflection
  3. Cfocal point
  4. Dconvex lens
Show answer
Answer: A. prismThe clue identifies prism.
Report a mistake

Q97. Within Light & Optics, which pair is correctly matched in Light & Optics?

  1. Areflection — lens that converges parallel rays
  2. Blens — transparent object that can disperse white light
  3. Cconcave lens — electromagnetic radiation detectable by human eyes
  4. Dspectrum — range of component colors or wavelengths
Show answer
Answer: D. spectrum — range of component colors or wavelengthsThe correct pair is spectrum — range of component colors or wavelengths.
Report a mistake

Q98. A classroom quiz gives this clue: 'electromagnetic radiation detectable by human eyes'. Which answer should be chosen?

  1. Areflection
  2. Bprism
  3. Cmirror
  4. Dvisible light
Show answer
Answer: D. visible lightThe correct answer is visible light.
Report a mistake

Q99. Within Light & Optics, which scientific match is NOT correct in this set on Light & Optics?

  1. Afocal point — point where converging rays meet
  2. Breflection — bouncing of light from a surface
  3. Crefraction — change in direction of light when speed changes between media
  4. Dmirror — lens that converges parallel rays
Show answer
Answer: D. mirror — lens that converges parallel raysmirror should be matched with surface designed to reflect light.
Report a mistake

Q100. Within Light & Optics, while reviewing Light & Optics, which statement is accurate?

  1. Afocal point is associated with point where converging rays meet.
  2. Blens is associated with range of component colors or wavelengths.
  3. Cconcave lens is associated with surface designed to reflect light.
  4. Dreflection is associated with lens that diverges parallel rays.
Show answer
Answer: A. focal point is associated with point where converging rays meet.focal point is associated with point where converging rays meet.
Report a mistake