MDCAT · Physics

MDCAT 2024, part 1 MCQs

50 solved multiple choice questions with answers.

Q1. A wheel makes 3 complete revolutions. What is the total number of radians through which a point on wheel has rotated?

  1. A2π
  2. B3π
  3. C6π
  4. D9π
Show answer
Answer: C. 6π
Report a mistake

Q2. In an elastic collision the total kinetic energy

  1. ADissipates after collision
  2. BIncreases after the collision
  3. CReduces after the collision
  4. DBefore and after collision remains the same
Show answer
Answer: D. Before and after collision remains the same
Report a mistake

Q3. For rigid body that rotates about a fixed axis, the angle swept out by a line passing through any point on the body and intersecting the axis of rotation perpendicularly is called?

  1. AAngular acceleration
  2. BAngular displacement
  3. CAngular momentum
  4. DAngular velocity
Show answer
Answer: B. Angular displacement
Report a mistake

Q4. The instantaneous velocity along the curved path is;

  1. AAlong the tangent
  2. BPerpendicular to the slop
  3. CParallel to the radius
  4. DAnti-parallel to the radius
Show answer
Answer: A. Along the tangent
Report a mistake

Q5. The range of projectile will be maximum if the factor sin2θ becomes

  1. AZero
  2. B1
  3. C-1
  4. D2
Show answer
Answer: B. 1
Report a mistake

Q6. In a rotating spaceship, to produce artificial gravity, what does the centripetal force do?

  1. AHas no effect inside the spaceship
  2. BIncreases spaceship’s rotation
  3. CPulls objects towards the centre
  4. DPushes the objects towards the outer wall
Show answer
Answer: D. Pushes the objects towards the outer wall
Report a mistake

Q7. When the mass of a body moving along a circle becomes half and radius becomes double, and v is constant, the centripetal force becomes?

  1. ADouble
  2. BHalf
  3. COne-fourth
  4. DRemains Same
Show answer
Answer: C. One-fourth
Report a mistake

Q8. The two dimensional motion under constant acceleration due to gravity is called:

  1. ACircular motion
  2. BRotational motion
  3. CProjectile motion
  4. DVibratory motion
Show answer
Answer: C. Projectile motion
Report a mistake

Q9. What happens when two waves of the same frequency and amplitude meet in phase?

  1. AThey cancel each other out resulting in a destructive interference
  2. BThey combine to form a wave double the amplitude, resulting in constructive interference
  3. CThey produce a wave with zero amplitude
  4. DThey produce a wave with the same amplitude as the individual waves
Show answer
Answer: B. They combine to form a wave double the amplitude, resulting in constructive interference
Report a mistake

Q10. In velocity time graph the area under graph is equal to the:

  1. ASpeed of an object
  2. BVelocity of an object
  3. CDistance covered by object
  4. DAcceleration of an object
Show answer
Answer: C. Distance covered by object
Report a mistake

Q11. Which type of waves can be polarized?

  1. ALongitudinal waves
  2. BMechanical waves
  3. CSound waves
  4. DTransverse waves
Show answer
Answer: D. Transverse waves
Report a mistake

Q12. According to Newton's Law of Motion the mass of the object is a quantitative measure of its

  1. AWeight
  2. BInertia
  3. CSpeed
  4. DAcceleration
Show answer
Answer: B. Inertia
Report a mistake

Q13. For longitudinal waves______

  1. AThe particles of the medium oscillate perpendicular to the wave’s propagation
  2. BThe particles of the medium remain stationary as the wave passes through
  3. CThe particles of the medium oscillate along the direction of the wave’s propagation
  4. DTheir velocity is enhanced when they travel through vacuum
Show answer
Answer: C. The particles of the medium oscillate along the direction of the wave’s propagation
Report a mistake

Q14. iKWh =___—s—iCSd? .

  1. A3.6]
  2. B3.6K)
  3. C3,6 MJ
  4. D3,6 GJ
Show answer
Answer: C. 3,6 MJ
Report a mistake

Q15. According to the principle of superimposition, when 2 or more waves overlap at a point in space, the amplitude of the resultant wave at that point is

  1. AAlways zero
  2. BThe product of the individual wave amplitude
  3. CThe product of the frequencies of the individual waves
  4. DThe sum of the amplitudes of the individual waves
Show answer
Answer: D. The sum of the amplitudes of the individual waves
Report a mistake

Q16. Which of the following is a non-conservative force?

  1. AFrictional force
  2. BElectric force
  3. CElastic spring force
  4. DGravitational force
Show answer
Answer: A. Frictional force
Report a mistake

Q17. The speed of sound in a medium containing ideal gas is NOT dependent on

  1. ADensity
  2. BMoisture
  3. CPressure
  4. DTemperature
Show answer
Answer: C. Pressure
Report a mistake

Q18. Work done is equal to

  1. AEffort x distance
  2. BEffort + distance
  3. CEffort - distance
  4. DEffort +distance
Show answer
Answer: A. Effort x distance
Report a mistake

Q19. When a force of 1N displaces its point of application by 1m in the direction of force, the work done is

  1. A1 J
  2. B10 J
  3. C0 J
  4. DJ
Show answer
Answer: A. 1 J
Report a mistake

Q20. A police car, with its siren on, is moving towards a stationary listener. How does the stationary listener receive the frequency of the sound emitted by the siren? It

  1. ADecreases
  2. BIncreases
  3. CStays the same
  4. DVaries randomly
Show answer
Answer: B. Increases
Report a mistake

Q21. An electric motor is used to lift the weight of 2.0N through a vertical distance of 100 cm in 4 sec. What is the power output of the motor?

  1. A0.25 W
  2. B0.5 W
  3. C0.75 W
  4. D1 W
Show answer
Answer: B. 0.5 W
Report a mistake

Q22. In an adiabatic process, how does the temperature of a gas change as its volume decreases?

  1. AThe temperature decreases
  2. BThe temperature increases
  3. CThe temperature remains constant
  4. DThe temperature first increases then decreases
Show answer
Answer: B. The temperature increases
Report a mistake

Q23. The centripetal acceleration of an object moving along a circle of radius ‘r’ with an angular speed ‘ω’ is given by the formula:

  1. Aa = rω²
  2. Ba = rω
  3. Ca = r²ω
  4. Da = r²ω²
Show answer
Answer: A. a = rω²
Report a mistake

Q24. During an isothermal expansion of an ideal gas, which of the following statement is true?

  1. APressure and temperature of the gas increase
  2. BThe internal energy of the gas increases
  3. CThe temperature of the gas remains constant
  4. DThe work done by the gas is zero
Show answer
Answer: C. The temperature of the gas remains constant
Report a mistake

Q25. An air craft makes aturnina horizontal circle of radiusi00m. It is travelling with a velocity of 250m/sec. The angular. velocity of the air craft will be: .

  1. A1.5 rad/sec .
  2. B2.5 rad/sec = : wv, 3
  3. C3 rad/sec
  4. D3.5 rad/sec _
Show answer
Answer: B. 2.5 rad/sec = : wv, 3
Report a mistake

Q26. Consider an ideal gas confined to the cylinder with a fixed piston, on heating the gas, all the heat supplied increases

  1. AKinetic energy of the molecules
  2. BPotential Energy of the molecules
  3. CThe intermolecular forces between gas molecules
  4. DThe number of gas molecules
Show answer
Answer: A. Kinetic energy of the molecules
Report a mistake

Q27. A particle of mass ‘m’ is moving on a circular path of radius ‘r’ with velocity ‘v’, then centripetal force acting on it is F. if the velocity of particle increases by 2 times and radius of circular path increases by 4 times then new centripetal force F” will be; .

  1. AF’ =2F oo
  2. BF°=<SF
  3. CF = 4F
  4. DF' = F .
Show answer
Answer: D. F' = F .
Report a mistake

Q28. What is the increase in force between two charges if the separation between them is decreased by 50 percent?

  1. ABecomes four times
  2. BDoubles
  3. CIncreases by half
  4. DTriples
Show answer
Answer: A. Becomes four times
Report a mistake

Q29. Aroller coaster is moving with 30 ms on a circular track of radius 30m. the net mass of coaster + passengers is ‘m’ the centripetal force acting on it is

  1. A900m - .
  2. Bm
  3. C450m
  4. D30m
Show answer
Answer: D. 30m
Report a mistake

Q30. According to Coulomb’s law, what happens to the electrostatic force between the 2-point charges if the distance between them is doubled?

  1. AThe force becomes one-fourth
  2. BThe force becomes half
  3. CThe force doubles
  4. DThe force remains the same
Show answer
Answer: A. The force becomes one-fourth
Report a mistake

Q31. Amplitude in the following figure is given as:

  1. A2 m
  2. B1/2 m
  3. C¼ m
  4. D1 m
Show answer
Answer: D. 1 m
Report a mistake

Q32. What does one Coulomb represent in terms of charge?

  1. AThe amount of charge transported by a current of 1 Ampere in 1 second
  2. BThe charge of 1 proton
  3. CThe charge of 1 electron
  4. DThe charge required to create a force of 1 Newton between two charges separated by 1 meter
Show answer
Answer: A. The amount of charge transported by a current of 1 Ampere in 1 second
Report a mistake

Q33. Which one of the following is INCORRECT about the nodes when the string is plucked

  1. AAmplitude of vibration is zero
  2. BDo not move along the string
  3. CProduced at the fixed ends of strings
  4. DDistance between consecutive nodes is 1 wavelength
Show answer
Answer: D. Distance between consecutive nodes is 1 wavelength
Report a mistake

Q34. Two points charges, +5µC and -5µC are placed at points A and B, respectively, which are separated by a distance 2d. What is the electric potential at the midpoint M of the line joining A and B?

  1. A2kQ/d
  2. BkQ/d
  3. C-kQ/d
  4. Dzero
Show answer
Answer: D. zero
Report a mistake

Q35. In transverse waves the portion above the mean level is called

  1. AWave front
  2. BWave crest
  3. CWave trough
  4. DWave length
Show answer
Answer: B. Wave crest
Report a mistake

Q36. In the case of a parallel plate capacitor, when the distance between the two plates is reduced to half and the area of the plate doubled, the capacitance

  1. AIncreases four times
  2. BIncreases six times
  3. CIs doubled
  4. DRemains the same
Show answer
Answer: A. Increases four times
Report a mistake

Q37. Which one of the following does not cause stationary waves?

  1. ATwo waves of equal frequency
  2. BTwo waves of same speed
  3. CTwo waves of unequal amplitude
  4. DTwo waves travelling in opposite directions
Show answer
Answer: C. Two waves of unequal amplitude
Report a mistake

Q38. If the dielectric material between the plates of the capacitor is removed, what happens to the electric field between the plates?

  1. AThe electric field becomes zero
  2. BThe electric field decreases
  3. CThe electric field increases
  4. DThe electric field remains the same
Show answer
Answer: C. The electric field increases
Report a mistake

Q39. Select the appropriate Doppler equation when source is approaching the stationary observer where f₀ is the observed frequency, fₛ is frequency of source, v is the speed of sound, vₛ is the speed of source relative to observer

  1. Af₀ = v/(v-vₛ) fₛ
  2. Bf₀ = v/(v+vₛ) fₛ
  3. Cf₀ = (v-vₛ)/v fₛ
  4. Df₀ = (v-vₛ)/(v+vₛ) fₛ
Show answer
Answer: A. f₀ = v/(v-vₛ) fₛ
Report a mistake

Q40. Capacitance of a capacitor increases with a decrease in:

  1. ADielectric constant
  2. BPlate area
  3. CPermittivity
  4. DPlate separation
Show answer
Answer: D. Plate separation
Report a mistake

Q41. The distance between two successive particles which are exactly in the same state of vibration is called YY .

  1. AFrequency
  2. BAmplitude
  3. CWavelength
  4. DTime period
Show answer
Answer: C. Wavelength
Report a mistake

Q42. The I-V Graph for a non-Ohmic material is always

  1. ACurved
  2. BHorizontal
  3. CLinear
  4. DPerpendicular
Show answer
Answer: A. Curved
Report a mistake

Q43. During the isothermal process, the temperature

  1. Aremains constant during the initial phase of the process
  2. Bremains constant throughout the process
  3. Calters throughout the process
  4. Dincreases throughout the process
Show answer
Answer: B. remains constant throughout the process
Report a mistake

Q44. Temperature coefficient of resistance is defined as increase in resistance per ohm original resistance per ___?

  1. ADegree rise in temperature
  2. BUnit increase in electric current
  3. CUnit decrease in capacitance
  4. DDegree drop in temperature
Show answer
Answer: A. Degree rise in temperature
Report a mistake

Q45. What is the value of heat energy (Q) in an adiabatic process?

  1. A+1
  2. B-1
  3. C0
  4. D+2
Show answer
Answer: C. 0
Report a mistake

Q46. For metals, the temperature coefficient of resistance is:

  1. AInfinity
  2. BNegative
  3. CPositive
  4. DZero
Show answer
Answer: C. Positive
Report a mistake

Q47. The Coulomb's law states XA

  1. AForce between two point charges Is
  2. BForce between two point charges Is
  3. CForce between two point charges is inversely proportional to the product of directly proportional to the sum of the the charges and directly proportional to charges and inversely proportional to the the square of the distance between them square of the distance between them
  4. DForce between two point charges is directly proportional tothe product of the | directly proportional to the product of the charges and inversely-proportional to the charges and the square of the distance square of the distance between them between them
Show answer
Answer: B. Force between two point charges Is
Report a mistake

Q48. If R1 and R2 are respectively the filament resistance of a 100-Watt bulb and 200-Watt bulb designed to operate on the same voltage, then power of:

  1. AR1 is two times R2
  2. BR2 is two times R1
  3. CR2 is four times R1
  4. DR1 is four times R2
Show answer
Answer: A. R1 is two times R2
Report a mistake

Q49. The formula V'= W / q> represents

  1. AElectric intensity
  2. BElectric power
  3. CElectric potential
  4. DElectric field gradient
Show answer
Answer: C. Electric potential
Report a mistake

Q50. The maximum power transfer theorem states that maximum power is delivered to the load when

  1. AThe load resistance is half of the source resistance
  2. BThe load resistance is zero
  3. CThe load resistance is double the source resistance
  4. DThe load resistance is equal to the source resistance
Show answer
Answer: D. The load resistance is equal to the source resistance
Report a mistake