NUMS MDCAT · Chemistry

NUMS 2025 MCQs

40 solved multiple choice questions with answers and short explanations.

Q1. Most molecular crystals melt below:

  1. A200°C
  2. B280°C
  3. C330°C
  4. D480°C
Show answer
Answer: A. 200°CMolecular crystals are held together by weak van der Waals forces and dipole-dipole interactions. These weak forces result in low melting points, generally below 200°C.
Report a mistake

Q2. How much heavier is the H-atom as compared to electron?

  1. A1937
  2. B1737
  3. C1837
  4. D1637
Show answer
Answer: C. 1837Mass of proton ≈ 1.673 × 10⁻²⁷ kg; mass of electron ≈ 9.109 × 10⁻³¹ kg. Ratio = 1836 ≈ 1837. A hydrogen atom is approximately 1837 times heavier than an electron.
Report a mistake

Q3. The value of equilibrium constant for the decomposition of ozone at 25°C:

  1. A10⁵⁵
  2. B10⁶⁵
  3. C10²⁵
  4. D10⁵⁰
Show answer
Answer: A. 10⁵⁵The decomposition of ozone (2O₃ ⇌ 3O₂) has a very large equilibrium constant (~10⁵⁵ at 25°C), indicating the reaction strongly favors product formation.
Report a mistake

Q4. A reaction is first order with respect to A and third order with respect to B, the rate equation is:

  1. ARate = K[A][B]²
  2. BRate = K[A]²[B]
  3. CRate = K[A][B]³
  4. DRate = K[A]
Show answer
Answer: C. Rate = K[A][B]³Rate law = K[A]¹[B]³. First order w.r.t. A and third order w.r.t. B gives Rate = K[A][B]³. Overall order = 1 + 3 = 4.
Report a mistake

Q5. For a reaction A → Product, if concentration of A is doubled, product increases 4 times. The order of reaction will be:

  1. AZero
  2. B1st
  3. C2nd
  4. D3rd
Show answer
Answer: C. 2ndRate = K[A]ⁿ. If [A] doubles and rate quadruples: 4 = 2ⁿ → n = 2. The reaction is second order.
Report a mistake

Q6. Select the spontaneous reaction from the following:

  1. AReaction of nitrogen and oxygen
  2. BEmission of α-particles from polonium
  3. CThermal decomposition of marble
  4. DBurning of paper
Show answer
Answer: B. Emission of α-particles from poloniumRadioactive decay (emission of α-particles from polonium) is spontaneous — it occurs naturally without requiring external energy input.
Report a mistake

Q7. Select the exothermic reaction among the following:

  1. AThermal composition of P₂O₅
  2. BFormation of atmospheric nitric oxide
  3. CBurning of methane
  4. DSublimation of dry ice
Show answer
Answer: C. Burning of methaneBurning of methane (CH₄ + 2O₂ → CO₂ + 2H₂O) is highly exothermic (ΔH = −890 kJ/mol). Sublimation and decomposition are endothermic.
Report a mistake

Q8. The oxidation number of Cl in HClO₂ is:

  1. A+1
  2. B+3
  3. C+5
  4. D+7
Show answer
Answer: B. +3In HClO₂: H = +1, O = −2. Equation: +1 + Cl + 2(−2) = 0 → Cl = +3.
Report a mistake

Q9. Bond order is equal to:

  1. ADifference between number of bonding electrons and antibonding electrons
  2. BThe sum of number of bonding electrons and antibonding electrons Half of the difference between number of bonding electrons and antibonding
  3. Celectrons Quarter of the difference between number of bonding electrons and
  4. Dantibonding electrons
Show answer
Answer: C. electrons Quarter of the difference between number of bonding electrons andelectrons and antibonding electrons Bond Order = (Bonding electrons − Antibonding electrons) / 2. This is the standard molecular orbital theory definition.
Report a mistake

Q10. Which of the following molecule has non-polar covalent bond?

  1. AMethyl chloride
  2. BMethanol
  3. CCarbon dioxide
  4. DTetrachloromethane
Show answer
Answer: C. Carbon dioxideIn CO₂, although each C=O bond is polar, the linear geometry means the dipoles cancel, making the overall molecule non-polar. CCl₄ is also non-polar but has polar bonds.
Report a mistake

Q11. Which of the following alcohols will give oily layer upon heating?

  1. A3-Methyl-2-butanol
  2. B2-Methyl-2-butanol
  3. C2-Butanol
  4. DEthyl alcohol
Show answer
Answer: B. 2-Methyl-2-butanolLucas test: Tertiary alcohols react immediately with Lucas reagent (ZnCl₂/HCl) giving an oily layer. 2-Methyl-2-butanol is a tertiary alcohol.
Report a mistake

Q12. Formalin is a mixture of:

  1. A40% HCHO, 8% CH₃OH, 52% H₂O
  2. B40% CH₃CHO, 8% CH₃OH, 50% H₂O
  3. C40% CH₃CHO, 8% C₂H₅OH, 50% H₂O
  4. D45% HCHO, 8% C₂H₅OH, 50% H₂O
Show answer
Answer: A. 40% HCHO, 8% CH₃OH, 52% H₂OFormalin is an aqueous solution of formaldehyde: 40% HCHO (formaldehyde), 8% methanol (CH₃OH, added as stabilizer), and 52% water.
Report a mistake

Q13. Polymerization of HCHO and CH₃CHO occurs in the presence of:

  1. AConc. H₂SO₄
  2. BDil. H₂SO₄
  3. CConc. H₂CO₃
  4. DDil. H₂CO₃
Show answer
Answer: A. Conc. H₂SO₄Aldol condensation and polymerization of aldehydes (HCHO, CH₃CHO) is catalyzed by concentrated H₂SO₄ (a strong acid catalyst).
Report a mistake

Q14. The boiling point of carboxylic acids are relatively high due to:

  1. AIncreased molecular mass
  2. BIntermolecular carbon bonding
  3. CIntermolecular oxygen bonding
  4. DIntermolecular hydrogen bonding
Show answer
Answer: D. Intermolecular hydrogen bondingCarboxylic acids form strong intermolecular hydrogen bonds (O–H···O=C) and even dimerize. This requires more energy to break, resulting in unusually high boiling points.
Report a mistake

Q15. Carboxylic acid reacts with metal carbonate. The colorless gas evolved is:

  1. AH₂
  2. BO₂
  3. CCO₂
  4. DCO
Show answer
Answer: C. CO₂2RCOOH + Na₂CO₃ → 2RCOONa + H₂O + CO₂↑. The colorless gas produced is carbon dioxide (CO₂), which turns lime water milky.
Report a mistake

Q16. Which of the following compound will react with 2,2-dimethyl propanoic acid to produce ester?

  1. AEthanoic acid
  2. BPropane
  3. CEthanol
  4. DPropanone
Show answer
Answer: C. EthanolEsters are formed by reaction of a carboxylic acid with an alcohol. Ethanol (C₂H₅OH) reacts with 2,2-dimethylpropanoic acid to form an ester + water.
Report a mistake

Q17. The most abundant protein in animal kingdom forming 25–35% of body proteins is/are:

  1. ADerived proteins
  2. BSimple proteins
  3. CCompound proteins
  4. DConjugated proteins
Show answer
Answer: B. Simple proteinsCollagen is the most abundant protein in animals (~25–35% of total body protein). It is a simple (fibrous) protein found in connective tissue, skin, bones.
Report a mistake

Q18. Protein present in connective tissues of human body is:

  1. APhosphoprotein
  2. BCollagen
  3. CLecithin
  4. DCholesterol
Show answer
Answer: B. CollagenCollagen is the main structural protein in connective tissues (tendons, ligaments, skin, cartilage). It provides tensile strength.
Report a mistake

Q19. In human body Ferritin is used to store:

  1. AP
  2. BCa
  3. CFe
  4. DZn
Show answer
Answer: C. FeFerritin is an intracellular protein that stores and releases iron (Fe) in a controlled manner. It acts as the primary iron storage protein in the body.
Report a mistake

Q20. In human body Ceruloplasmin acts as a carrier of:

  1. AO₂
  2. BZn
  3. CCu
  4. DFe
Show answer
Answer: C. CuCeruloplasmin is a copper-carrying (ferroxidase) enzyme in blood plasma. It carries about 95% of the total copper in healthy human plasma.
Report a mistake

Q21. Predict the element with lowest ionization energy:

  1. AMg
  2. BAr
  3. CSi
  4. DP
Show answer
Answer: A. MgAmong Mg, Ar, Si, P — Magnesium has the lowest ionization energy. Ar (noble gas) has very high IE. Si and P have higher IE than Mg due to greater nuclear charge effects.
Report a mistake

Q22. Select the group II element which has the highest atomic radius?

  1. ABe
  2. BCa
  3. CBa
  4. DSr
Show answer
Answer: C. BaIn Group II, atomic radius increases down the group. Ba (Barium) is at the bottom of Group IIA among given options and has the largest atomic radius.
Report a mistake

Q23. Which of the following element has least boiling point?

  1. ALi
  2. BNa
  3. CK
  4. DCs
Show answer
Answer: D. CsIn Group IA alkali metals, boiling point decreases down the group as metallic bonding weakens with larger atomic size. Cs has the lowest boiling point (944 K) among the options.
Report a mistake

Q24. 2-pentanone and 3-pentanone are examples of:

  1. AMetamers
  2. BFunctional group isomers
  3. CTautomerism
  4. DPosition isomers
Show answer
Answer: D. Position isomers2-pentanone (CH₃COCH₂CH₂CH₃) and 3-pentanone (CH₃CH₂COCH₂CH₃) have the same molecular formula but the carbonyl group is at different positions — position isomers.
Report a mistake

Q25. Which of the following will show optical isomerism?

  1. A2,2-Dihydroxy propanoic acid
  2. B2-Hydroxy butanedioic acid
  3. CButanoic acid
  4. D2-Hydroxy propanoic acid
Show answer
Answer: D. 2-Hydroxy propanoic acid2-Hydroxy propanoic acid (lactic acid, CH₃CH(OH)COOH) has a chiral carbon (C-2 bonded to OH, H, CH₃, COOH — four different groups), showing optical isomerism.
Report a mistake

Q26. Which of the following is an electrophile in sulphonation?

  1. ASO₃H
  2. BSO₃
  3. CSO₂
  4. DSO₃⁺
Show answer
Answer: B. SO₃In sulphonation of benzene, SO₃ acts as the electrophile. It is a strong electrophile due to the highly electrophilic sulfur atom (attacked by the π electrons of benzene).
Report a mistake

Q27. Acetylene reacts with hydrogen bromide to form:

  1. A2,2-Dibromoethane
  2. B1,1-Dibromoethane
  3. C1,2-Dibromoethane
  4. D1,1,2,2-Tetrabromoethane
Show answer
Answer: B. 1,1-DibromoethaneHC≡CH + 2HBr → CH₃CHBr₂ (1,1-dibromoethane) by Markovnikov's rule. First addition gives vinyl bromide, second addition gives 1,1-dibromoethane.
Report a mistake

Q28. Generally the decreasing order of reactivity is:

  1. AAlkane > Alkynes > Alkene
  2. BAlkene < Alkynes < Alkanes
  3. CAlkene > Alkynes > Alkanes
  4. DAlkynes < Alkanes < Alkene
Show answer
Answer: C. Alkene > Alkynes > AlkanesReactivity towards electrophilic addition: Alkenes > Alkynes > Alkanes. Alkenes are most reactive due to the accessible π bond; alkanes are least reactive (only substitution).
Report a mistake

Q29. Racemic mixture formed in SN1 reaction is due to presence of empty:

  1. As-orbital
  2. Bp-orbital
  3. Csp³-orbital
  4. Dsp²-orbital
Show answer
Answer: B. p-orbitalSN1 forms a planar carbocation intermediate with an empty p-orbital. Nucleophile attack from both faces equally gives a racemic mixture (50:50 enantiomers).
Report a mistake

Q30. The order of reactivity of alcohol with respect to cleavage of C–O bond:

  1. ATertiary > Secondary > Primary
  2. BPrimary > Tertiary > Secondary
  3. CSecondary > Tertiary > Primary
  4. DTertiary < Secondary < Primary
Show answer
Answer: A. Tertiary > Secondary > PrimaryTertiary carbocations are most stable, so tertiary alcohols undergo C–O cleavage most readily. Order: Tertiary > Secondary > Primary.
Report a mistake

Q31. NaOH + H₂SO₄ → Na₂SO₄ + H₂O. When 40g of NaOH reacts with 49g of H₂SO₄, the number of water molecules produced are:

  1. A6.02 × 10²³
  2. B6.02 × 10²⁴
  3. C1.2044 × 10²³
  4. D1.204 × 10²⁴
Show answer
Answer: A. 6.02 × 10²³Moles NaOH = 40/40 = 1 mol. Moles H₂SO₄ = 49/98 = 0.5 mol. Reaction: 2NaOH + H₂SO₄ → Na₂SO₄ + 2H₂O. 0.5 mol H₂SO₄ produces 1 mol H₂O = 6.02 × 10²³ molecules.
Report a mistake

Q32. The number of electrons in a subshell can be calculated by the formula:

  1. A2l + 1
  2. B2l + 2
  3. C2(2 + l)
  4. D2(2l + 1)
Show answer
Answer: D. 2(2l + 1)Number of electrons in a subshell = 2(2l + 1). For l=0 (s): 2(1)=2; l=1 (p): 2(3)=6; l=2 (d): 2(5)=10; l=3 (f): 2(7)=14. ✓
Report a mistake

Q33. When 5d orbital is complete, the entering electron goes into:

  1. A6s
  2. B6p
  3. C6d
  4. D6f
Show answer
Answer: B. 6pAfter 5d is filled (configuration: ...5d¹⁰), following Aufbau principle the next electron enters the 6p subshell.
Report a mistake

Q34. Which of the following relationship is correct for kinetic energy of gases?

  1. AK.E = 2RT/3NA
  2. BK.E = 3RT/2NA
  3. CK.E = 2mNT/2R
  4. DK.E = 2NA/3RT
Show answer
Answer: B. K.E = 3RT/2NAAverage kinetic energy per molecule = 3kT/2 = 3RT/(2NA). This is the fundamental kinetic theory result for a monatomic ideal gas.
Report a mistake

Q35. The fourth state of matter is:

  1. ASolid
  2. BLiquid
  3. CGaseous liquid
  4. DPlasma
Show answer
Answer: D. PlasmaThe four states of matter are solid, liquid, gas, and plasma. Plasma is the fourth state, consisting of ionized gas with free electrons and ions.
Report a mistake

Q36. Which factor does not affect the rate of evaporation?

  1. AAmount of liquid
  2. BSurface area
  3. CTemperature
  4. DInter-molecular forces
Show answer
Answer: A. Amount of liquidRate of evaporation depends on surface area, temperature, and intermolecular forces. The amount (volume) of liquid does not affect the rate — only the total evaporation time.
Report a mistake

Q37. Which of the following is responsible for the low boiling point of diethyl ether as compared to water?

  1. AWeak intermolecular forces
  2. BHigh surface tension
  3. CLow vapour pressure
  4. DHigh vapour pressure
Show answer
Answer: A. Weak intermolecular forcesDiethyl ether lacks O–H groups for hydrogen bonding; it only has weak van der Waals forces. This results in lower boiling point compared to water (strong H-bonding).
Report a mistake

Q38. Hydrogen bonding does not exist in:

  1. AProteins
  2. BAlcohols
  3. CLiq HF
  4. DSiH₄
Show answer
Answer: D. SiH₄SiH₄ has no electronegative atom (N, O, F) bonded to H, so no hydrogen bonding exists. Si is not electronegative enough to create the required dipole.
Report a mistake

Q39. The factor that affects the lattice energy is:

  1. ACharge to size ratio
  2. BShielding effect
  3. CCrystal structure
  4. DAtomic radius
Show answer
Answer: A. Charge to size ratioLattice energy ∝ (charge × charge) / distance. The charge-to-size ratio (ionic potential) is the primary factor — higher charge and smaller size → greater lattice energy.
Report a mistake

Q40. The shape of the crystal lattice depends upon:

  1. ASize of particles
  2. BNature of particles
  3. CArrangement of particles
  4. DSize of unit cell
Show answer
Answer: C. Arrangement of particlesThe shape of a crystal lattice is determined by the arrangement (geometric pattern) of particles (atoms, ions, molecules) in the unit cell repeated in 3D space. SECTION 3 — ENGLISH (Q.70 – Q.84)
Report a mistake