NUMS MDCAT · Physics

NUMS 2023 MCQs

40 solved multiple choice questions with answers and short explanations.

Q1. In isochoric process:

  1. APressure is kept constant
  2. BExchange of heat is zero
  3. CVolume is kept constant
  4. DTemperature is kept constant
Show answer
Answer: C. Volume is kept constantIsochoric means constant volume (iso = same, choric = volume). No work is done as W = P×ΔV = 0 when ΔV = 0.
Report a mistake

Q2. If 42 J heat is transferred to the system during expansion, what is the change in internal energy when work done is 32 J?

  1. A74 J
  2. B10 J
  3. C116 J
  4. D106 J
Show answer
Answer: B. 10 JBy 1st Law: ΔU = Q - W = 42 - 32 = 10 J. Heat added minus work done by system gives change in internal energy.
Report a mistake

Q3. The 1st law of thermodynamics is the generalization of the law of conservation of:

  1. AMass
  2. BCharge
  3. CEnergy
  4. DMomentum
Show answer
Answer: C. EnergyThe 1st law of thermodynamics states energy cannot be created or destroyed, only converted — this is conservation of energy.
Report a mistake

Q4. While studying charging and discharging of a capacitor, Rc = Resistance × Capacitance is known as:

  1. AElectrostatic constant
  2. BTime constant
  3. CDielectric constant
  4. DProportionality constant
Show answer
Answer: B. Time constantRC = Time constant (τ). It represents the time for a capacitor to charge to ~63% of its maximum voltage or discharge to ~37%.
Report a mistake

Q5. In parallel combination of two capacitors, their equivalent capacitance is equal to:

  1. AC1 + C2
  2. B1/C1 + 1/C2
  3. CC1C2 / C1 + C2
  4. D2C1C2 / C1 + C2
Show answer
Answer: A. C1 + C2In parallel, capacitances add directly: Ceq = C1 + C2. Each capacitor has the same voltage but stores charge independently.
Report a mistake

Q6. The S.I unit of capacitance of a capacitor is:

  1. ACoulomb
  2. BVolt
  3. CFarad
  4. DAmpere
Show answer
Answer: C. FaradThe SI unit of capacitance is the Farad (F), named after Michael Faraday. 1 Farad = 1 Coulomb per Volt.
Report a mistake

Q7. 1 kWh =

  1. A0.36 × 10⁶ J
  2. B36 × 10⁵ J
  3. C3.6 × 10⁶ J
  4. D0.036 × 10⁵ J
Show answer
Answer: C. 3.6 × 10⁶ J1 kWh = 1000 W × 3600 s = 3,600,000 J = 3.6 × 10⁶ J. This is the unit used for electrical energy billing.
Report a mistake

Q8. Volt × Ampere is the unit of:

  1. ACurrent
  2. BVolt
  3. CResistance
  4. DPower
Show answer
Answer: D. PowerPower P = V × I (Voltage × Current). So Volt × Ampere = Watt = unit of Power.
Report a mistake

Q9. If length of the wire becomes two times to its original value and area becomes one half to its original value, then resistance of the wire becomes:

  1. ADouble
  2. BFour times
  3. COne half
  4. DOne forth
Show answer
Answer: B. Four timesR = ρL/A. New R = ρ(2L)/(A/2) = 4ρL/A = 4R. When L doubles and A halves, resistance becomes 4 times.
Report a mistake

Q10. When a charged particle enters the magnetic field parallel, it will:

  1. ADeflect toward north
  2. BDeflect toward south
  3. CMove straight
  4. DMove in circular path
Show answer
Answer: C. Move straightWhen velocity is parallel to magnetic field, the angle θ = 0°, so F = qvB sin0° = 0. No force acts — particle moves straight.
Report a mistake

Q11. The dimension of magnetic field strength is same as that of:

  1. AMagnetic flux
  2. BMagnetic induction
  3. CWork done
  4. DMagnetic force
Show answer
Answer: B. Magnetic inductionMagnetic field strength B has the same dimension as magnetic induction (both measured in Tesla = kg/As²).
Report a mistake

Q12. The weber is unit of measure of:

  1. AConductance
  2. BElectric current
  3. CMagnetic flux
  4. DElectric flux
Show answer
Answer: C. Magnetic fluxWeber (Wb) is the SI unit of magnetic flux. 1 Weber = 1 Volt·second. Named after Wilhelm Eduard Weber.
Report a mistake

Q13. The Lenz's law is also statement of law of conservation of:

  1. ACharge
  2. BMass
  3. CEnergy
  4. DPressure
Show answer
Answer: C. EnergyLenz's law states induced EMF opposes the change causing it — this is a consequence of conservation of energy (no free energy).
Report a mistake

Q14. In Fleming's right hand rule, the second finger indicates:

  1. AForce
  2. BMagnetic field
  3. CInduced current
  4. DMotion
Show answer
Answer: C. Induced currentFleming's Right Hand Rule: thumb = motion, forefinger = magnetic field, second/middle finger = induced current direction.
Report a mistake

Q15. A current generator is a device that converts:

  1. AMechanical energy into electrical energy
  2. BChemical energy into mechanical energy
  3. CSound energy into mechanical energy
  4. DElectrical energy into mechanical energy
Show answer
Answer: A. Mechanical energy into electrical energyA generator (dynamo) converts mechanical energy (rotation) into electrical energy using electromagnetic induction.
Report a mistake

Q16. A device that converts AC into DC is called:

  1. ADiode
  2. BTransistor
  3. CCapacitor
  4. DInductor
Show answer
Answer: A. DiodeA diode (specifically a rectifier diode) allows current in only one direction, converting alternating current to direct current.
Report a mistake

Q17. The conversion of alternating current into direct current is called:

  1. AAmplification
  2. BRectification
  3. CMagnification
  4. DResolution
Show answer
Answer: B. RectificationRectification is the process of converting AC to DC. A rectifier uses diodes to allow current flow in one direction only.
Report a mistake

Q18. In full wave rectification, ________ diodes are used.

  1. A1
  2. B2
  3. C3
  4. D4
Show answer
Answer: D. 4Full wave bridge rectifier uses 4 diodes arranged in a bridge configuration to rectify both half-cycles of AC.
Report a mistake

Q19. The time taken for half the number of atoms of radioactive isotopes to disintegrate is called:

  1. AAverage life
  2. BMean life
  3. CTotal life
  4. DHalf life
Show answer
Answer: D. Half lifeHalf-life (t½) is the time for half the radioactive atoms to decay. It is a fundamental property of each radioactive isotope.
Report a mistake

Q20. A 32g radioactive element decays and remains 2g after 60 days. What is half-life of this radioactive element?

  1. A2 days
  2. B6 days
  3. C10 days
  4. D15 days
Show answer
Answer: D. 15 days32→16→8→4→2g requires 4 half-lives. So 4t½ = 60 days, t½ = 15 days.
Report a mistake

Q21. If the car is slowing down along negative x axis then acceleration will be along:

  1. APositive x Axis
  2. BNegative x Axis
  3. CPositive y Axis
  4. DNegative y Axis
Show answer
Answer: A. Positive x AxisCar moves in -x direction and slows down. Deceleration opposes motion, so acceleration is in +x direction (opposite to velocity).
Report a mistake

Q22. The instantaneous velocity along the curved path is:

  1. AAlong the tangent
  2. BPerpendicular to the slope
  3. CParallel to the radius
  4. DAnti-parallel to the radius
Show answer
Answer: A. Along the tangentInstantaneous velocity is always directed along the tangent to the path at that point, regardless of the curve's shape.
Report a mistake

Q23. In perfectly elastic collision:

  1. AOnly momentum is conserved
  2. BOnly total energy is conserved
  3. COnly kinetic energy is conserved
  4. DMomentum, kinetic energy and total energy, all are conserved
Show answer
Answer: D. Momentum, kinetic energy and total energy, all are conservedconserved In perfectly elastic collision, both momentum AND kinetic energy are conserved. Total energy is always conserved (1st law).
Report a mistake

Q24. The slope of a displacement-time graph is equal to:

  1. AVelocity
  2. BDisplacement
  3. CAcceleration
  4. DDistance
Show answer
Answer: A. VelocitySlope = Δdisplacement/Δtime = velocity. The gradient of a displacement-time graph gives instantaneous velocity.
Report a mistake

Q25. Range of a projectile on a horizontal plane is same for the following pair of angle:

  1. A15 & 30
  2. B60 & 20
  3. C75 & 15
  4. D50 & 25
Show answer
Answer: C. 75 & 15Range R = v²sin2θ/g. Angles that are complementary (add to 90°) give same range: 75° + 15° = 90°. ✓
Report a mistake

Q26. The product of force and time is equal to:

  1. AAngular momentum
  2. BForce
  3. CChange in momentum
  4. DVelocity
Show answer
Answer: C. Change in momentumImpulse = F × t = Change in momentum (Δp). This is the impulse-momentum theorem from Newton's 2nd law.
Report a mistake

Q27. At what point during the motion of projectile its vertical component of velocity is zero?

  1. APoint of projection
  2. BLanding point
  3. CHighest point
  4. DJust before landing
Show answer
Answer: C. Highest pointAt the highest point of projectile motion, the vertical velocity component becomes zero momentarily before the projectile falls.
Report a mistake

Q28. A projectile has 1 J of PE. What is the work done in terms of height?

  1. A1 J
  2. B10 J
  3. C0 J
  4. D0.1 J
Show answer
Answer: C. 0 JAt maximum height, KE = 0 and PE = 1J. Work done by gravity during flight = 0 (conservative force, no net work in cycle).
Report a mistake

Q29. Power is dot product of:

  1. AForce and displacement
  2. BForce and velocity
  3. CForce and time
  4. DWork and time
Show answer
Answer: B. Force and velocityP = F⃗ · v⃗ (dot product of force and velocity). Power = rate of doing work = Fv cosθ.
Report a mistake

Q30. The area under force-displacement graph gives:

  1. ADisplacement
  2. BPower
  3. CWork
  4. DAcceleration
Show answer
Answer: C. WorkWork = ∫F·dx. The area under a Force vs Displacement graph equals the work done by that force.
Report a mistake

Q31. A body of mass 'm' is moving with velocity 'v'. After a short interval of time its velocity becomes double. How many times its K.E will increase or decrease?

  1. A2 time increased
  2. B2 time decreased
  3. C4 time increased
  4. D4 time decreased
Show answer
Answer: C. 4 time increasedKE = ½mv². If v doubles to 2v: new KE = ½m(2v)² = 4×½mv². KE increases 4 times.
Report a mistake

Q32. The relation between radian and degree is:

  1. A1 rad = 57.3°
  2. B1° = 57.3 rad
  3. C1 rad = 1°
  4. D1° = π rad
Show answer
Answer: A. 1 rad = 57.3°1 radian = 180°/π ≈ 57.3°. This is the conversion factor between radians and degrees.
Report a mistake

Q33. In case of centripetal force the value of instantaneous acceleration is given by:

  1. Aac = v/r
  2. Bac = v²/r
  3. Cac = vr
  4. Dac = v²r
Show answer
Answer: B. ac = v²/rCentripetal acceleration ac = v²/r. This acceleration points toward the center of the circular path.
Report a mistake

Q34. An electric motor turns at 400 revolutions per minute. Its angular velocity in rad/s will be:

  1. A20π/3
  2. B30π/3
  3. C40π/3
  4. D30π/4
Show answer
Answer: C. 40π/3ω = 400 rev/min × 2π rad/rev ÷ 60 s/min = 800π/60 = 40π/3 rad/s.
Report a mistake

Q35. A disc, a hoop and a sphere are rolling down from an inclined plane simultaneously. Which object will reach at the bottom first?

  1. AHoop
  2. BDisc
  3. CSphere
  4. DAll at the same time
Show answer
Answer: C. SphereSphere has smallest moment of inertia ratio (I = 2/5 mr²) vs disc (1/2) vs hoop (mr²). Sphere reaches bottom first.
Report a mistake

Q36. The centripetal force formula is:

  1. AFc = mω²
  2. BFc = mrω
  3. CFc = mrω²
  4. DFc = mr²ω
Show answer
Answer: C. Fc = mrω²Centripetal force Fc = mrω² = mv²/r. Here m=mass, r=radius, ω=angular velocity.
Report a mistake

Q37. In the following figure the wavelength is: [wave diagram showing 2m]

  1. A2m
  2. B1.5m
  3. C1m
  4. D0.5m
Show answer
Answer: A. 2mThe figure shows one complete wave over 2m distance. Wavelength is the length of one complete wave cycle = 2m.
Report a mistake

Q38. With increase in pressure, the speed of sound will:

  1. AIncrease
  2. BDecrease
  3. CFirst increase then decrease
  4. DRemain the same
Show answer
Answer: D. Remain the sameSpeed of sound v = √(γP/ρ). Since both P and ρ increase proportionally with pressure, v remains unchanged.
Report a mistake

Q39. In transverse waves, the portion above the mean level is called:

  1. AWave front
  2. BWave crest
  3. CWave trough
  4. DWave length
Show answer
Answer: B. Wave crestIn transverse waves, the crest is the highest point above the equilibrium/mean position. Trough is the lowest point.
Report a mistake

Q40. The maximum displacement of particles of a medium, on either side of the mean position of a wave, is called:

  1. AWavelength
  2. BFrequency
  3. CAmplitude
  4. DCrest RECOMMENDED STUDY RESOURCE — MDCATGUIDE.COM TEAM The Book NUMS Toppers Swear By After reviewing dozens of resources, our team at Mdcat Guide officially recommends this book as the single most effective preparation tool for NUMS aspirants in Pakistan. ✓ Complete Past Papers All NUMS past papers year-wise with complete solutions ✓ Subject-wise MCQs Topic-by-topic MCQ bank covering entire NUMS syllabus ✓ Detailed Explanations Every answer explained with concept reinforcement ✓ Exam Strategies Proven attempt order, time management & scoring techniques ✓ Free Home Delivery Delivered to your door across all of Pakistan — free ✓ Trusted by Toppers Used by thousands of NUMS qualifiers every year "This book changed the game for me. I scored 142/150 in NUMS Biology using the MCQ bank and past papers from this book. Highly recommended." — NUMS 2022 Qualifier | Shared on Mdcat Guide YouTube comments Order Now — Free Delivery mbbs.com.pk/product/numsbook/ WhatsApp: +92 316 4047600 Sponsored R
Show answer
Answer: C. AmplitudeAmplitude is the maximum displacement from the equilibrium/mean position. It determines the energy carried by the wave.
Report a mistake