BS Computer Engineering · Computer Networks

Unit 2: Data Link MCQs

50 solved multiple choice questions with answers and short explanations.

Q1. Which statement best describes Data Link Concepts within Data Link? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AIt can be evaluated without knowing any constraints or operating conditions.
  2. BIt should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
  3. CIt is only a naming convention with no effect on system behavior.
  4. DIt guarantees correct operation without considering interfaces.
Show answer
Answer: B. It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.Computer Networks → Data Link → Data Link Concepts: It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
Report a mistake

Q2. What is the primary engineering purpose of Data Link Concepts? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AIts sole purpose is to maximize component count.
  2. BIt removes the need for requirements and verification.
  3. CIt guarantees maximum performance regardless of power or cost.
  4. DIt supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Show answer
Answer: D. It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.Computer Networks → Data Link → Data Link Concepts: It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Report a mistake

Q3. A computer-engineering team is working with Data Link Concepts. Which approach is most appropriate? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. ASkip verification once the design compiles or powers on.
  2. BDefine requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
  3. CSelect components before defining requirements.
  4. DIgnore hardware-software interfaces because they are independent.
Show answer
Answer: B. Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.Computer Networks → Data Link → Data Link Concepts: Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
Report a mistake

Q4. Which principle best supports correct analysis of Data Link Concepts? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AUse equations without checking their assumptions.
  2. BIgnore units and boundary conditions when calculations appear reasonable.
  3. CChoose the result that looks familiar instead of validating the model.
  4. DUse an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Show answer
Answer: D. Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.Computer Networks → Data Link → Data Link Concepts: Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Report a mistake

Q5. Which consideration is most important when designing a solution involving Data Link Concepts? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AChoose the most complex architecture even when requirements are simple.
  2. BBalance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
  3. CAlways maximize clock rate regardless of power and reliability.
  4. DIgnore interfaces if each component works independently.
Show answer
Answer: B. Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.Computer Networks → Data Link → Data Link Concepts: Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
Report a mistake

Q6. How should an engineer verify work involving Data Link Concepts? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AAssume simulation alone proves every physical implementation.
  2. BTest only the easiest operating condition.
  3. CTreat successful compilation as complete system validation.
  4. DTest against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Show answer
Answer: D. Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.Computer Networks → Data Link → Data Link Concepts: Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Report a mistake

Q7. When a problem involving Data Link Concepts occurs, what should be done first? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AIgnore measurements because troubleshooting should rely on intuition.
  2. BEstablish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
  3. CReplace several components before collecting evidence.
  4. DAssume the first suspected cause is correct.
Show answer
Answer: B. Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.Computer Networks → Data Link → Data Link Concepts: Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
Report a mistake

Q8. Which evidence best supports a performance assessment involving Data Link Concepts? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AUse an unrelated metric because it is easy to measure.
  2. BReport a single number without operating conditions.
  3. CAssume theoretical peak performance equals sustained system performance.
  4. DUse relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Show answer
Answer: D. Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.Computer Networks → Data Link → Data Link Concepts: Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Report a mistake

Q9. Which trade-off should be considered when selecting an approach to Data Link Concepts? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AImplementation complexity has no effect on reliability or schedule.
  2. BBalance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
  3. COnly maximum speed matters in every design.
  4. DPower and cost never affect architecture decisions.
Show answer
Answer: B. Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.Computer Networks → Data Link → Data Link Concepts: Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
Report a mistake

Q10. Which example best represents disciplined engineering practice involving Data Link Concepts? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AMake undocumented hardware changes during testing.
  2. BModify multiple interfaces simultaneously without isolation.
  3. CUse personal preference instead of requirements and evidence.
  4. DDocument requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Show answer
Answer: D. Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.Computer Networks → Data Link → Data Link Concepts: Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Report a mistake

Q11. Which statement best describes Data Link Principles within Data Link? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AIt is only a naming convention with no effect on system behavior.
  2. BIt guarantees correct operation without considering interfaces.
  3. CIt can be evaluated without knowing any constraints or operating conditions.
  4. DIt should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
Show answer
Answer: D. It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.Computer Networks → Data Link → Data Link Principles: It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
Report a mistake

Q12. What is the primary engineering purpose of Data Link Principles? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AIt guarantees maximum performance regardless of power or cost.
  2. BIt supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
  3. CIts sole purpose is to maximize component count.
  4. DIt removes the need for requirements and verification.
Show answer
Answer: B. It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.Computer Networks → Data Link → Data Link Principles: It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Report a mistake

Q13. A computer-engineering team is working with Data Link Principles. Which approach is most appropriate? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. ASelect components before defining requirements.
  2. BIgnore hardware-software interfaces because they are independent.
  3. CSkip verification once the design compiles or powers on.
  4. DDefine requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
Show answer
Answer: D. Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.Computer Networks → Data Link → Data Link Principles: Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
Report a mistake

Q14. Which principle best supports correct analysis of Data Link Principles? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AChoose the result that looks familiar instead of validating the model.
  2. BUse an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
  3. CUse equations without checking their assumptions.
  4. DIgnore units and boundary conditions when calculations appear reasonable.
Show answer
Answer: B. Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.Computer Networks → Data Link → Data Link Principles: Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Report a mistake

Q15. Which consideration is most important when designing a solution involving Data Link Principles? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AAlways maximize clock rate regardless of power and reliability.
  2. BIgnore interfaces if each component works independently.
  3. CChoose the most complex architecture even when requirements are simple.
  4. DBalance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
Show answer
Answer: D. Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.Computer Networks → Data Link → Data Link Principles: Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
Report a mistake

Q16. How should an engineer verify work involving Data Link Principles? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. ATreat successful compilation as complete system validation.
  2. BTest against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
  3. CAssume simulation alone proves every physical implementation.
  4. DTest only the easiest operating condition.
Show answer
Answer: B. Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.Computer Networks → Data Link → Data Link Principles: Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Report a mistake

Q17. When a problem involving Data Link Principles occurs, what should be done first? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AReplace several components before collecting evidence.
  2. BAssume the first suspected cause is correct.
  3. CIgnore measurements because troubleshooting should rely on intuition.
  4. DEstablish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
Show answer
Answer: D. Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.Computer Networks → Data Link → Data Link Principles: Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
Report a mistake

Q18. Which evidence best supports a performance assessment involving Data Link Principles? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AAssume theoretical peak performance equals sustained system performance.
  2. BUse relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
  3. CUse an unrelated metric because it is easy to measure.
  4. DReport a single number without operating conditions.
Show answer
Answer: B. Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.Computer Networks → Data Link → Data Link Principles: Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Report a mistake

Q19. Which trade-off should be considered when selecting an approach to Data Link Principles? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AOnly maximum speed matters in every design.
  2. BPower and cost never affect architecture decisions.
  3. CImplementation complexity has no effect on reliability or schedule.
  4. DBalance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
Show answer
Answer: D. Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.Computer Networks → Data Link → Data Link Principles: Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
Report a mistake

Q20. Which example best represents disciplined engineering practice involving Data Link Principles? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AUse personal preference instead of requirements and evidence.
  2. BDocument requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
  3. CMake undocumented hardware changes during testing.
  4. DModify multiple interfaces simultaneously without isolation.
Show answer
Answer: B. Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.Computer Networks → Data Link → Data Link Principles: Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Report a mistake

Q21. Which statement best describes Data Link Analysis within Data Link? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AIt can be evaluated without knowing any constraints or operating conditions.
  2. BIt should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
  3. CIt is only a naming convention with no effect on system behavior.
  4. DIt guarantees correct operation without considering interfaces.
Show answer
Answer: B. It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.Computer Networks → Data Link → Data Link Analysis: It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
Report a mistake

Q22. What is the primary engineering purpose of Data Link Analysis? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AIts sole purpose is to maximize component count.
  2. BIt removes the need for requirements and verification.
  3. CIt guarantees maximum performance regardless of power or cost.
  4. DIt supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Show answer
Answer: D. It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.Computer Networks → Data Link → Data Link Analysis: It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Report a mistake

Q23. A computer-engineering team is working with Data Link Analysis. Which approach is most appropriate? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. ASkip verification once the design compiles or powers on.
  2. BDefine requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
  3. CSelect components before defining requirements.
  4. DIgnore hardware-software interfaces because they are independent.
Show answer
Answer: B. Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.Computer Networks → Data Link → Data Link Analysis: Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
Report a mistake

Q24. Which principle best supports correct analysis of Data Link Analysis? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AUse equations without checking their assumptions.
  2. BIgnore units and boundary conditions when calculations appear reasonable.
  3. CChoose the result that looks familiar instead of validating the model.
  4. DUse an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Show answer
Answer: D. Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.Computer Networks → Data Link → Data Link Analysis: Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Report a mistake

Q25. Which consideration is most important when designing a solution involving Data Link Analysis? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AChoose the most complex architecture even when requirements are simple.
  2. BBalance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
  3. CAlways maximize clock rate regardless of power and reliability.
  4. DIgnore interfaces if each component works independently.
Show answer
Answer: B. Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.Computer Networks → Data Link → Data Link Analysis: Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
Report a mistake

Q26. How should an engineer verify work involving Data Link Analysis? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AAssume simulation alone proves every physical implementation.
  2. BTest only the easiest operating condition.
  3. CTreat successful compilation as complete system validation.
  4. DTest against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Show answer
Answer: D. Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.Computer Networks → Data Link → Data Link Analysis: Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Report a mistake

Q27. When a problem involving Data Link Analysis occurs, what should be done first? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AIgnore measurements because troubleshooting should rely on intuition.
  2. BEstablish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
  3. CReplace several components before collecting evidence.
  4. DAssume the first suspected cause is correct.
Show answer
Answer: B. Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.Computer Networks → Data Link → Data Link Analysis: Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
Report a mistake

Q28. Which evidence best supports a performance assessment involving Data Link Analysis? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AUse an unrelated metric because it is easy to measure.
  2. BReport a single number without operating conditions.
  3. CAssume theoretical peak performance equals sustained system performance.
  4. DUse relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Show answer
Answer: D. Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.Computer Networks → Data Link → Data Link Analysis: Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Report a mistake

Q29. Which trade-off should be considered when selecting an approach to Data Link Analysis? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AImplementation complexity has no effect on reliability or schedule.
  2. BBalance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
  3. COnly maximum speed matters in every design.
  4. DPower and cost never affect architecture decisions.
Show answer
Answer: B. Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.Computer Networks → Data Link → Data Link Analysis: Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
Report a mistake

Q30. Which example best represents disciplined engineering practice involving Data Link Analysis? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AMake undocumented hardware changes during testing.
  2. BModify multiple interfaces simultaneously without isolation.
  3. CUse personal preference instead of requirements and evidence.
  4. DDocument requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Show answer
Answer: D. Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.Computer Networks → Data Link → Data Link Analysis: Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Report a mistake

Q31. Which statement best describes Data Link Design within Data Link? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AIt is only a naming convention with no effect on system behavior.
  2. BIt guarantees correct operation without considering interfaces.
  3. CIt can be evaluated without knowing any constraints or operating conditions.
  4. DIt should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
Show answer
Answer: D. It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.Computer Networks → Data Link → Data Link Design: It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
Report a mistake

Q32. What is the primary engineering purpose of Data Link Design? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AIt guarantees maximum performance regardless of power or cost.
  2. BIt supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
  3. CIts sole purpose is to maximize component count.
  4. DIt removes the need for requirements and verification.
Show answer
Answer: B. It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.Computer Networks → Data Link → Data Link Design: It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Report a mistake

Q33. A computer-engineering team is working with Data Link Design. Which approach is most appropriate? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. ASelect components before defining requirements.
  2. BIgnore hardware-software interfaces because they are independent.
  3. CSkip verification once the design compiles or powers on.
  4. DDefine requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
Show answer
Answer: D. Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.Computer Networks → Data Link → Data Link Design: Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
Report a mistake

Q34. Which principle best supports correct analysis of Data Link Design? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AChoose the result that looks familiar instead of validating the model.
  2. BUse an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
  3. CUse equations without checking their assumptions.
  4. DIgnore units and boundary conditions when calculations appear reasonable.
Show answer
Answer: B. Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.Computer Networks → Data Link → Data Link Design: Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Report a mistake

Q35. Which consideration is most important when designing a solution involving Data Link Design? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AAlways maximize clock rate regardless of power and reliability.
  2. BIgnore interfaces if each component works independently.
  3. CChoose the most complex architecture even when requirements are simple.
  4. DBalance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
Show answer
Answer: D. Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.Computer Networks → Data Link → Data Link Design: Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
Report a mistake

Q36. How should an engineer verify work involving Data Link Design? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. ATreat successful compilation as complete system validation.
  2. BTest against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
  3. CAssume simulation alone proves every physical implementation.
  4. DTest only the easiest operating condition.
Show answer
Answer: B. Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.Computer Networks → Data Link → Data Link Design: Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Report a mistake

Q37. When a problem involving Data Link Design occurs, what should be done first? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AReplace several components before collecting evidence.
  2. BAssume the first suspected cause is correct.
  3. CIgnore measurements because troubleshooting should rely on intuition.
  4. DEstablish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
Show answer
Answer: D. Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.Computer Networks → Data Link → Data Link Design: Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
Report a mistake

Q38. Which evidence best supports a performance assessment involving Data Link Design? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AAssume theoretical peak performance equals sustained system performance.
  2. BUse relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
  3. CUse an unrelated metric because it is easy to measure.
  4. DReport a single number without operating conditions.
Show answer
Answer: B. Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.Computer Networks → Data Link → Data Link Design: Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Report a mistake

Q39. Which trade-off should be considered when selecting an approach to Data Link Design? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AOnly maximum speed matters in every design.
  2. BPower and cost never affect architecture decisions.
  3. CImplementation complexity has no effect on reliability or schedule.
  4. DBalance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
Show answer
Answer: D. Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.Computer Networks → Data Link → Data Link Design: Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
Report a mistake

Q40. Which example best represents disciplined engineering practice involving Data Link Design? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AUse personal preference instead of requirements and evidence.
  2. BDocument requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
  3. CMake undocumented hardware changes during testing.
  4. DModify multiple interfaces simultaneously without isolation.
Show answer
Answer: B. Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.Computer Networks → Data Link → Data Link Design: Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Report a mistake

Q41. Which statement best describes Data Link Applications within Data Link? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AIt can be evaluated without knowing any constraints or operating conditions.
  2. BIt should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
  3. CIt is only a naming convention with no effect on system behavior.
  4. DIt guarantees correct operation without considering interfaces.
Show answer
Answer: B. It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.Computer Networks → Data Link → Data Link Applications: It should be understood through its governing principles, interfaces, constraints, inputs, outputs, and role in the overall system.
Report a mistake

Q42. What is the primary engineering purpose of Data Link Applications? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AIts sole purpose is to maximize component count.
  2. BIt removes the need for requirements and verification.
  3. CIt guarantees maximum performance regardless of power or cost.
  4. DIt supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Show answer
Answer: D. It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.Computer Networks → Data Link → Data Link Applications: It supports a defined hardware, software, signal, control, or system objective while satisfying engineering constraints.
Report a mistake

Q43. A computer-engineering team is working with Data Link Applications. Which approach is most appropriate? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. ASkip verification once the design compiles or powers on.
  2. BDefine requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
  3. CSelect components before defining requirements.
  4. DIgnore hardware-software interfaces because they are independent.
Show answer
Answer: B. Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.Computer Networks → Data Link → Data Link Applications: Define requirements and interfaces, analyze constraints, implement the selected approach, and verify the resulting behavior.
Report a mistake

Q44. Which principle best supports correct analysis of Data Link Applications? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AUse equations without checking their assumptions.
  2. BIgnore units and boundary conditions when calculations appear reasonable.
  3. CChoose the result that looks familiar instead of validating the model.
  4. DUse an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Show answer
Answer: D. Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.Computer Networks → Data Link → Data Link Applications: Use an appropriate model, identify assumptions and boundary conditions, and apply the relevant engineering relationships consistently.
Report a mistake

Q45. Which consideration is most important when designing a solution involving Data Link Applications? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AChoose the most complex architecture even when requirements are simple.
  2. BBalance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
  3. CAlways maximize clock rate regardless of power and reliability.
  4. DIgnore interfaces if each component works independently.
Show answer
Answer: B. Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.Computer Networks → Data Link → Data Link Applications: Balance functional requirements with timing, power, cost, reliability, complexity, safety, and interface constraints.
Report a mistake

Q46. How should an engineer verify work involving Data Link Applications? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AAssume simulation alone proves every physical implementation.
  2. BTest only the easiest operating condition.
  3. CTreat successful compilation as complete system validation.
  4. DTest against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Show answer
Answer: D. Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.Computer Networks → Data Link → Data Link Applications: Test against explicit requirements using measurements, simulation, analysis, or reproducible experiments appropriate to the system.
Report a mistake

Q47. When a problem involving Data Link Applications occurs, what should be done first? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AIgnore measurements because troubleshooting should rely on intuition.
  2. BEstablish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
  3. CReplace several components before collecting evidence.
  4. DAssume the first suspected cause is correct.
Show answer
Answer: B. Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.Computer Networks → Data Link → Data Link Applications: Establish the symptoms and scope, collect measurements or traces, then isolate likely causes systematically.
Report a mistake

Q48. Which evidence best supports a performance assessment involving Data Link Applications? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AUse an unrelated metric because it is easy to measure.
  2. BReport a single number without operating conditions.
  3. CAssume theoretical peak performance equals sustained system performance.
  4. DUse relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Show answer
Answer: D. Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.Computer Networks → Data Link → Data Link Applications: Use relevant measured or simulated metrics tied to requirements, under clearly stated operating conditions.
Report a mistake

Q49. Which trade-off should be considered when selecting an approach to Data Link Applications? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AImplementation complexity has no effect on reliability or schedule.
  2. BBalance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
  3. COnly maximum speed matters in every design.
  4. DPower and cost never affect architecture decisions.
Show answer
Answer: B. Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.Computer Networks → Data Link → Data Link Applications: Balance performance with power, cost, area, latency, reliability, maintainability, and implementation complexity.
Report a mistake

Q50. Which example best represents disciplined engineering practice involving Data Link Applications? Context: BS Computer Engineering / Computer Networks / Data Link.

  1. AMake undocumented hardware changes during testing.
  2. BModify multiple interfaces simultaneously without isolation.
  3. CUse personal preference instead of requirements and evidence.
  4. DDocument requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Show answer
Answer: D. Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.Computer Networks → Data Link → Data Link Applications: Document requirements and assumptions, use controlled design changes, verify interfaces, and retain test evidence.
Report a mistake