BS Information Technology · IT Governance, Risk & Compliance

Unit 5: Controls MCQs

50 solved multiple choice questions with answers and short explanations.

Q1. Which statement best describes Controls Concepts in Controls? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AIt is only a naming convention and has no operational effect.
  2. BIt guarantees unlimited capacity without dependencies.
  3. CIt applies only to visual interface design.
  4. DIt should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Show answer
Answer: D. It should be understood through its function, dependencies, configuration, and effect on the wider IT service.IT Governance, Risk & Compliance → Controls → Controls Concepts: It should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Report a mistake

Q2. What is the main purpose of Controls Concepts in an Information Technology environment? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AIt guarantees security without controls or monitoring.
  2. BIt supports a defined business or technical service while meeting operational, security, and performance requirements.
  3. CIt eliminates the need for business requirements.
  4. DIts sole purpose is to maximize hardware count.
Show answer
Answer: B. It supports a defined business or technical service while meeting operational, security, and performance requirements.IT Governance, Risk & Compliance → Controls → Controls Concepts: It supports a defined business or technical service while meeting operational, security, and performance requirements.
Report a mistake

Q3. An IT team is working with Controls Concepts. Which action is most appropriate? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AChange production immediately without checking dependencies.
  2. BChoose a solution only because it is newest.
  3. CSkip verification because successful installation proves correctness.
  4. DConfirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Show answer
Answer: D. Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.IT Governance, Risk & Compliance → Controls → Controls Concepts: Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Report a mistake

Q4. Which approach best supports correct configuration or implementation of Controls Concepts? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AAssume configuration is correct whenever the service starts.
  2. BUse documented requirements and baselines, make controlled changes, and validate the configuration afterward.
  3. CUse undocumented defaults in every environment.
  4. DChange several unrelated settings at once and avoid recording them.
Show answer
Answer: B. Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.IT Governance, Risk & Compliance → Controls → Controls Concepts: Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.
Report a mistake

Q5. Which consideration is most important when securing or controlling Controls Concepts? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AGive all users administrator privileges to avoid access problems.
  2. BDisable logging so attackers cannot see logs.
  3. CUse the same shared credential for every service.
  4. DApply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Show answer
Answer: D. Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.IT Governance, Risk & Compliance → Controls → Controls Concepts: Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Report a mistake

Q6. Which practice best improves reliability when using Controls Concepts? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. ATreat backups as unnecessary when storage is new.
  2. BUse monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
  3. CAvoid monitoring to reduce system load.
  4. DDepend on one component and never test recovery.
Show answer
Answer: B. Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.IT Governance, Risk & Compliance → Controls → Controls Concepts: Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
Report a mistake

Q7. When troubleshooting Controls Concepts, what should be done first? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AReplace multiple components before collecting evidence.
  2. BAssume the first suspected cause is correct.
  3. CIgnore logs because they cannot assist diagnosis.
  4. DEstablish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Show answer
Answer: D. Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.IT Governance, Risk & Compliance → Controls → Controls Concepts: Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Report a mistake

Q8. Which evidence best demonstrates that Controls Concepts is operating as intended? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AUse an unrelated metric because it is easy to obtain.
  2. BUse logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
  3. CRely only on a verbal statement that the system looks fine.
  4. DCount documentation pages regardless of service behavior.
Show answer
Answer: B. Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.IT Governance, Risk & Compliance → Controls → Controls Concepts: Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
Report a mistake

Q9. Which trade-off should be evaluated when selecting or scaling Controls Concepts? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AAlways maximize one metric and ignore all other constraints.
  2. BOnly purchase price matters in every IT decision.
  3. COperational complexity never affects technology selection.
  4. DBalance performance, availability, security, cost, scalability, and operational complexity.
Show answer
Answer: D. Balance performance, availability, security, cost, scalability, and operational complexity.IT Governance, Risk & Compliance → Controls → Controls Concepts: Balance performance, availability, security, cost, scalability, and operational complexity.
Report a mistake

Q10. Which example best represents professional practice involving Controls Concepts? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AUse personal preference instead of requirements and evidence.
  2. BDocument the objective, implement through controlled procedures, verify the outcome, and retain evidence.
  3. CMake untracked production changes whenever convenient.
  4. DAvoid documentation and post-change verification.
Show answer
Answer: B. Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.IT Governance, Risk & Compliance → Controls → Controls Concepts: Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.
Report a mistake

Q11. Which statement best describes Controls Components in Controls? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AIt applies only to visual interface design.
  2. BIt should be understood through its function, dependencies, configuration, and effect on the wider IT service.
  3. CIt is only a naming convention and has no operational effect.
  4. DIt guarantees unlimited capacity without dependencies.
Show answer
Answer: B. It should be understood through its function, dependencies, configuration, and effect on the wider IT service.IT Governance, Risk & Compliance → Controls → Controls Components: It should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Report a mistake

Q12. What is the main purpose of Controls Components in an Information Technology environment? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AIt eliminates the need for business requirements.
  2. BIts sole purpose is to maximize hardware count.
  3. CIt guarantees security without controls or monitoring.
  4. DIt supports a defined business or technical service while meeting operational, security, and performance requirements.
Show answer
Answer: D. It supports a defined business or technical service while meeting operational, security, and performance requirements.IT Governance, Risk & Compliance → Controls → Controls Components: It supports a defined business or technical service while meeting operational, security, and performance requirements.
Report a mistake

Q13. An IT team is working with Controls Components. Which action is most appropriate? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. ASkip verification because successful installation proves correctness.
  2. BConfirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
  3. CChange production immediately without checking dependencies.
  4. DChoose a solution only because it is newest.
Show answer
Answer: B. Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.IT Governance, Risk & Compliance → Controls → Controls Components: Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Report a mistake

Q14. Which approach best supports correct configuration or implementation of Controls Components? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AUse undocumented defaults in every environment.
  2. BChange several unrelated settings at once and avoid recording them.
  3. CAssume configuration is correct whenever the service starts.
  4. DUse documented requirements and baselines, make controlled changes, and validate the configuration afterward.
Show answer
Answer: D. Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.IT Governance, Risk & Compliance → Controls → Controls Components: Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.
Report a mistake

Q15. Which consideration is most important when securing or controlling Controls Components? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AUse the same shared credential for every service.
  2. BApply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
  3. CGive all users administrator privileges to avoid access problems.
  4. DDisable logging so attackers cannot see logs.
Show answer
Answer: B. Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.IT Governance, Risk & Compliance → Controls → Controls Components: Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Report a mistake

Q16. Which practice best improves reliability when using Controls Components? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AAvoid monitoring to reduce system load.
  2. BDepend on one component and never test recovery.
  3. CTreat backups as unnecessary when storage is new.
  4. DUse monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
Show answer
Answer: D. Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.IT Governance, Risk & Compliance → Controls → Controls Components: Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
Report a mistake

Q17. When troubleshooting Controls Components, what should be done first? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AIgnore logs because they cannot assist diagnosis.
  2. BEstablish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
  3. CReplace multiple components before collecting evidence.
  4. DAssume the first suspected cause is correct.
Show answer
Answer: B. Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.IT Governance, Risk & Compliance → Controls → Controls Components: Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Report a mistake

Q18. Which evidence best demonstrates that Controls Components is operating as intended? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. ARely only on a verbal statement that the system looks fine.
  2. BCount documentation pages regardless of service behavior.
  3. CUse an unrelated metric because it is easy to obtain.
  4. DUse logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
Show answer
Answer: D. Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.IT Governance, Risk & Compliance → Controls → Controls Components: Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
Report a mistake

Q19. Which trade-off should be evaluated when selecting or scaling Controls Components? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AOperational complexity never affects technology selection.
  2. BBalance performance, availability, security, cost, scalability, and operational complexity.
  3. CAlways maximize one metric and ignore all other constraints.
  4. DOnly purchase price matters in every IT decision.
Show answer
Answer: B. Balance performance, availability, security, cost, scalability, and operational complexity.IT Governance, Risk & Compliance → Controls → Controls Components: Balance performance, availability, security, cost, scalability, and operational complexity.
Report a mistake

Q20. Which example best represents professional practice involving Controls Components? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AMake untracked production changes whenever convenient.
  2. BAvoid documentation and post-change verification.
  3. CUse personal preference instead of requirements and evidence.
  4. DDocument the objective, implement through controlled procedures, verify the outcome, and retain evidence.
Show answer
Answer: D. Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.IT Governance, Risk & Compliance → Controls → Controls Components: Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.
Report a mistake

Q21. Which statement best describes Controls Configuration in Controls? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AIt is only a naming convention and has no operational effect.
  2. BIt guarantees unlimited capacity without dependencies.
  3. CIt applies only to visual interface design.
  4. DIt should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Show answer
Answer: D. It should be understood through its function, dependencies, configuration, and effect on the wider IT service.IT Governance, Risk & Compliance → Controls → Controls Configuration: It should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Report a mistake

Q22. What is the main purpose of Controls Configuration in an Information Technology environment? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AIt guarantees security without controls or monitoring.
  2. BIt supports a defined business or technical service while meeting operational, security, and performance requirements.
  3. CIt eliminates the need for business requirements.
  4. DIts sole purpose is to maximize hardware count.
Show answer
Answer: B. It supports a defined business or technical service while meeting operational, security, and performance requirements.IT Governance, Risk & Compliance → Controls → Controls Configuration: It supports a defined business or technical service while meeting operational, security, and performance requirements.
Report a mistake

Q23. An IT team is working with Controls Configuration. Which action is most appropriate? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AChange production immediately without checking dependencies.
  2. BChoose a solution only because it is newest.
  3. CSkip verification because successful installation proves correctness.
  4. DConfirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Show answer
Answer: D. Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.IT Governance, Risk & Compliance → Controls → Controls Configuration: Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Report a mistake

Q24. Which approach best supports correct configuration or implementation of Controls Configuration? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AAssume configuration is correct whenever the service starts.
  2. BUse documented requirements and baselines, make controlled changes, and validate the configuration afterward.
  3. CUse undocumented defaults in every environment.
  4. DChange several unrelated settings at once and avoid recording them.
Show answer
Answer: B. Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.IT Governance, Risk & Compliance → Controls → Controls Configuration: Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.
Report a mistake

Q25. Which consideration is most important when securing or controlling Controls Configuration? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AGive all users administrator privileges to avoid access problems.
  2. BDisable logging so attackers cannot see logs.
  3. CUse the same shared credential for every service.
  4. DApply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Show answer
Answer: D. Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.IT Governance, Risk & Compliance → Controls → Controls Configuration: Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Report a mistake

Q26. Which practice best improves reliability when using Controls Configuration? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. ATreat backups as unnecessary when storage is new.
  2. BUse monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
  3. CAvoid monitoring to reduce system load.
  4. DDepend on one component and never test recovery.
Show answer
Answer: B. Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.IT Governance, Risk & Compliance → Controls → Controls Configuration: Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
Report a mistake

Q27. When troubleshooting Controls Configuration, what should be done first? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AReplace multiple components before collecting evidence.
  2. BAssume the first suspected cause is correct.
  3. CIgnore logs because they cannot assist diagnosis.
  4. DEstablish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Show answer
Answer: D. Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.IT Governance, Risk & Compliance → Controls → Controls Configuration: Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Report a mistake

Q28. Which evidence best demonstrates that Controls Configuration is operating as intended? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AUse an unrelated metric because it is easy to obtain.
  2. BUse logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
  3. CRely only on a verbal statement that the system looks fine.
  4. DCount documentation pages regardless of service behavior.
Show answer
Answer: B. Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.IT Governance, Risk & Compliance → Controls → Controls Configuration: Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
Report a mistake

Q29. Which trade-off should be evaluated when selecting or scaling Controls Configuration? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AAlways maximize one metric and ignore all other constraints.
  2. BOnly purchase price matters in every IT decision.
  3. COperational complexity never affects technology selection.
  4. DBalance performance, availability, security, cost, scalability, and operational complexity.
Show answer
Answer: D. Balance performance, availability, security, cost, scalability, and operational complexity.IT Governance, Risk & Compliance → Controls → Controls Configuration: Balance performance, availability, security, cost, scalability, and operational complexity.
Report a mistake

Q30. Which example best represents professional practice involving Controls Configuration? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AUse personal preference instead of requirements and evidence.
  2. BDocument the objective, implement through controlled procedures, verify the outcome, and retain evidence.
  3. CMake untracked production changes whenever convenient.
  4. DAvoid documentation and post-change verification.
Show answer
Answer: B. Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.IT Governance, Risk & Compliance → Controls → Controls Configuration: Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.
Report a mistake

Q31. Which statement best describes Controls Evaluation in Controls? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AIt applies only to visual interface design.
  2. BIt should be understood through its function, dependencies, configuration, and effect on the wider IT service.
  3. CIt is only a naming convention and has no operational effect.
  4. DIt guarantees unlimited capacity without dependencies.
Show answer
Answer: B. It should be understood through its function, dependencies, configuration, and effect on the wider IT service.IT Governance, Risk & Compliance → Controls → Controls Evaluation: It should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Report a mistake

Q32. What is the main purpose of Controls Evaluation in an Information Technology environment? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AIt eliminates the need for business requirements.
  2. BIts sole purpose is to maximize hardware count.
  3. CIt guarantees security without controls or monitoring.
  4. DIt supports a defined business or technical service while meeting operational, security, and performance requirements.
Show answer
Answer: D. It supports a defined business or technical service while meeting operational, security, and performance requirements.IT Governance, Risk & Compliance → Controls → Controls Evaluation: It supports a defined business or technical service while meeting operational, security, and performance requirements.
Report a mistake

Q33. An IT team is working with Controls Evaluation. Which action is most appropriate? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. ASkip verification because successful installation proves correctness.
  2. BConfirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
  3. CChange production immediately without checking dependencies.
  4. DChoose a solution only because it is newest.
Show answer
Answer: B. Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.IT Governance, Risk & Compliance → Controls → Controls Evaluation: Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Report a mistake

Q34. Which approach best supports correct configuration or implementation of Controls Evaluation? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AUse undocumented defaults in every environment.
  2. BChange several unrelated settings at once and avoid recording them.
  3. CAssume configuration is correct whenever the service starts.
  4. DUse documented requirements and baselines, make controlled changes, and validate the configuration afterward.
Show answer
Answer: D. Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.IT Governance, Risk & Compliance → Controls → Controls Evaluation: Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.
Report a mistake

Q35. Which consideration is most important when securing or controlling Controls Evaluation? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AUse the same shared credential for every service.
  2. BApply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
  3. CGive all users administrator privileges to avoid access problems.
  4. DDisable logging so attackers cannot see logs.
Show answer
Answer: B. Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.IT Governance, Risk & Compliance → Controls → Controls Evaluation: Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Report a mistake

Q36. Which practice best improves reliability when using Controls Evaluation? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AAvoid monitoring to reduce system load.
  2. BDepend on one component and never test recovery.
  3. CTreat backups as unnecessary when storage is new.
  4. DUse monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
Show answer
Answer: D. Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.IT Governance, Risk & Compliance → Controls → Controls Evaluation: Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
Report a mistake

Q37. When troubleshooting Controls Evaluation, what should be done first? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AIgnore logs because they cannot assist diagnosis.
  2. BEstablish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
  3. CReplace multiple components before collecting evidence.
  4. DAssume the first suspected cause is correct.
Show answer
Answer: B. Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.IT Governance, Risk & Compliance → Controls → Controls Evaluation: Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Report a mistake

Q38. Which evidence best demonstrates that Controls Evaluation is operating as intended? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. ARely only on a verbal statement that the system looks fine.
  2. BCount documentation pages regardless of service behavior.
  3. CUse an unrelated metric because it is easy to obtain.
  4. DUse logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
Show answer
Answer: D. Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.IT Governance, Risk & Compliance → Controls → Controls Evaluation: Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
Report a mistake

Q39. Which trade-off should be evaluated when selecting or scaling Controls Evaluation? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AOperational complexity never affects technology selection.
  2. BBalance performance, availability, security, cost, scalability, and operational complexity.
  3. CAlways maximize one metric and ignore all other constraints.
  4. DOnly purchase price matters in every IT decision.
Show answer
Answer: B. Balance performance, availability, security, cost, scalability, and operational complexity.IT Governance, Risk & Compliance → Controls → Controls Evaluation: Balance performance, availability, security, cost, scalability, and operational complexity.
Report a mistake

Q40. Which example best represents professional practice involving Controls Evaluation? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AMake untracked production changes whenever convenient.
  2. BAvoid documentation and post-change verification.
  3. CUse personal preference instead of requirements and evidence.
  4. DDocument the objective, implement through controlled procedures, verify the outcome, and retain evidence.
Show answer
Answer: D. Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.IT Governance, Risk & Compliance → Controls → Controls Evaluation: Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.
Report a mistake

Q41. Which statement best describes Controls Applications in Controls? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AIt is only a naming convention and has no operational effect.
  2. BIt guarantees unlimited capacity without dependencies.
  3. CIt applies only to visual interface design.
  4. DIt should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Show answer
Answer: D. It should be understood through its function, dependencies, configuration, and effect on the wider IT service.IT Governance, Risk & Compliance → Controls → Controls Applications: It should be understood through its function, dependencies, configuration, and effect on the wider IT service.
Report a mistake

Q42. What is the main purpose of Controls Applications in an Information Technology environment? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AIt guarantees security without controls or monitoring.
  2. BIt supports a defined business or technical service while meeting operational, security, and performance requirements.
  3. CIt eliminates the need for business requirements.
  4. DIts sole purpose is to maximize hardware count.
Show answer
Answer: B. It supports a defined business or technical service while meeting operational, security, and performance requirements.IT Governance, Risk & Compliance → Controls → Controls Applications: It supports a defined business or technical service while meeting operational, security, and performance requirements.
Report a mistake

Q43. An IT team is working with Controls Applications. Which action is most appropriate? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AChange production immediately without checking dependencies.
  2. BChoose a solution only because it is newest.
  3. CSkip verification because successful installation proves correctness.
  4. DConfirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Show answer
Answer: D. Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.IT Governance, Risk & Compliance → Controls → Controls Applications: Confirm requirements and dependencies, apply the change in a controlled manner, and verify the resulting service.
Report a mistake

Q44. Which approach best supports correct configuration or implementation of Controls Applications? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AAssume configuration is correct whenever the service starts.
  2. BUse documented requirements and baselines, make controlled changes, and validate the configuration afterward.
  3. CUse undocumented defaults in every environment.
  4. DChange several unrelated settings at once and avoid recording them.
Show answer
Answer: B. Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.IT Governance, Risk & Compliance → Controls → Controls Applications: Use documented requirements and baselines, make controlled changes, and validate the configuration afterward.
Report a mistake

Q45. Which consideration is most important when securing or controlling Controls Applications? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AGive all users administrator privileges to avoid access problems.
  2. BDisable logging so attackers cannot see logs.
  3. CUse the same shared credential for every service.
  4. DApply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Show answer
Answer: D. Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.IT Governance, Risk & Compliance → Controls → Controls Applications: Apply least privilege, secure configuration, appropriate authentication, and monitoring according to the risk.
Report a mistake

Q46. Which practice best improves reliability when using Controls Applications? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. ATreat backups as unnecessary when storage is new.
  2. BUse monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
  3. CAvoid monitoring to reduce system load.
  4. DDepend on one component and never test recovery.
Show answer
Answer: B. Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.IT Governance, Risk & Compliance → Controls → Controls Applications: Use monitoring, redundancy or recovery controls where appropriate, and test expected failure scenarios.
Report a mistake

Q47. When troubleshooting Controls Applications, what should be done first? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AReplace multiple components before collecting evidence.
  2. BAssume the first suspected cause is correct.
  3. CIgnore logs because they cannot assist diagnosis.
  4. DEstablish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Show answer
Answer: D. Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.IT Governance, Risk & Compliance → Controls → Controls Applications: Establish the symptoms and scope, collect evidence, then test the most plausible causes systematically.
Report a mistake

Q48. Which evidence best demonstrates that Controls Applications is operating as intended? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AUse an unrelated metric because it is easy to obtain.
  2. BUse logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
  3. CRely only on a verbal statement that the system looks fine.
  4. DCount documentation pages regardless of service behavior.
Show answer
Answer: B. Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.IT Governance, Risk & Compliance → Controls → Controls Applications: Use logs, tests, service metrics, or monitoring data tied directly to the stated requirement or objective.
Report a mistake

Q49. Which trade-off should be evaluated when selecting or scaling Controls Applications? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AAlways maximize one metric and ignore all other constraints.
  2. BOnly purchase price matters in every IT decision.
  3. COperational complexity never affects technology selection.
  4. DBalance performance, availability, security, cost, scalability, and operational complexity.
Show answer
Answer: D. Balance performance, availability, security, cost, scalability, and operational complexity.IT Governance, Risk & Compliance → Controls → Controls Applications: Balance performance, availability, security, cost, scalability, and operational complexity.
Report a mistake

Q50. Which example best represents professional practice involving Controls Applications? Context: BS Information Technology / IT Governance, Risk & Compliance / Controls.

  1. AUse personal preference instead of requirements and evidence.
  2. BDocument the objective, implement through controlled procedures, verify the outcome, and retain evidence.
  3. CMake untracked production changes whenever convenient.
  4. DAvoid documentation and post-change verification.
Show answer
Answer: B. Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.IT Governance, Risk & Compliance → Controls → Controls Applications: Document the objective, implement through controlled procedures, verify the outcome, and retain evidence.
Report a mistake