Civil Engineering · Strength of Materials

Unit 9: Combined Stresses MCQs

50 solved multiple choice questions with answers and short explanations.

Q1. Which statement best describes Plane stress?

  1. Aa stress state in which stresses normal to one coordinate direction are negligible
  2. Boccurs at the extreme fiber farthest from the neutral axis
  3. Cis generally nonuniform over the depth of a typical beam cross section
  4. Dω = 2πN/60 when N is in revolutions per minute
Show answer
Answer: A. a stress state in which stresses normal to one coordinate direction are negligiblePlane stress: a stress state in which stresses normal to one coordinate direction are negligible.
Report a mistake

Q2. Which concept is best described by the following statement: “a stress state in which stresses normal to one coordinate direction are negligible”?

  1. AYield strength
  2. BPlane stress
  3. CBuilt-up beam
  4. DEccentric axial load
Show answer
Answer: B. Plane stressPlane stress: a stress state in which stresses normal to one coordinate direction are negligible.
Report a mistake

Q3. In Strength of Materials, which statement about Plane stress is correct?

  1. Aτ = q/t
  2. Bstress is proportional to strain within the proportional limit
  3. Ca stress state in which stresses normal to one coordinate direction are negligible
  4. Da stability failure involving lateral deflection of a compressed member
Show answer
Answer: C. a stress state in which stresses normal to one coordinate direction are negligiblePlane stress: a stress state in which stresses normal to one coordinate direction are negligible.
Report a mistake

Q4. Select the correct relationship or description for Plane stress.

  1. Aσ = Eε for a linear elastic material
  2. Bthe stress associated with the onset of significant plastic deformation
  3. Cthe product AE, which resists axial deformation
  4. Da stress state in which stresses normal to one coordinate direction are negligible
Show answer
Answer: D. a stress state in which stresses normal to one coordinate direction are negligiblePlane stress: a stress state in which stresses normal to one coordinate direction are negligible.
Report a mistake

Q5. Which option correctly identifies Plane stress?

  1. Aa stress state in which stresses normal to one coordinate direction are negligible
  2. Bhas effective-length factor K = 1
  3. Cis the same through segments between applied torques when no intermediate torque is applied
  4. DT/J = τ/r = Gθ/L for a prismatic circular shaft
Show answer
Answer: A. a stress state in which stresses normal to one coordinate direction are negligiblePlane stress: a stress state in which stresses normal to one coordinate direction are negligible.
Report a mistake

Q6. Which statement best describes Plane stress components?

  1. Athe stress associated with the onset of significant plastic deformation
  2. Bare commonly represented by σx, σy, and τxy
  3. Ccommonly has a pin support and a roller support
  4. Daxial force divided by the cross-sectional area, σ = P/A
Show answer
Answer: B. are commonly represented by σx, σy, and τxyPlane stress components: are commonly represented by σx, σy, and τxy.
Report a mistake

Q7. Which concept is best described by the following statement: “are commonly represented by σx, σy, and τxy”?

  1. ACenter of Mohr's circle for plane stress
  2. BDirect shear
  3. CPlane stress components
  4. DTransverse shear in a beam
Show answer
Answer: C. Plane stress componentsPlane stress components: are commonly represented by σx, σy, and τxy.
Report a mistake

Q8. In Strength of Materials, which statement about Plane stress components is correct?

  1. Athe stress associated with the onset of significant plastic deformation
  2. Bequals the square root of [((σx-σy)/2)^2 + τxy^2]
  3. Cthe maximum engineering stress reached on a tensile stress-strain curve
  4. Dare commonly represented by σx, σy, and τxy
Show answer
Answer: D. are commonly represented by σx, σy, and τxyPlane stress components: are commonly represented by σx, σy, and τxy.
Report a mistake

Q9. Select the correct relationship or description for Plane stress components.

  1. Aare commonly represented by σx, σy, and τxy
  2. Bequals the square root of [((σx-σy)/2)^2 + τxy^2]
  3. Care designed to transfer interface shear so the components act together
  4. Dnormal stresses acting on planes where shear stress is zero
Show answer
Answer: A. are commonly represented by σx, σy, and τxyPlane stress components: are commonly represented by σx, σy, and τxy.
Report a mistake

Q10. Which option correctly identifies Plane stress components?

  1. Ageometric deformation conditions used with force-deformation relations
  2. Bare commonly represented by σx, σy, and τxy
  3. Cnormal stress produced when an axial load pulls a member
  4. Dis generally nonuniform over the depth of a typical beam cross section
Show answer
Answer: B. are commonly represented by σx, σy, and τxyPlane stress components: are commonly represented by σx, σy, and τxy.
Report a mistake

Q11. Which statement best describes Principal stresses?

  1. AdV/dx = -w under the common sign convention
  2. Bhas compatible longitudinal strain at the interface between materials
  3. Cnormal stresses acting on planes where shear stress is zero
  4. Dthe structural response must be linear
Show answer
Answer: C. normal stresses acting on planes where shear stress is zeroPrincipal stresses: normal stresses acting on planes where shear stress is zero.
Report a mistake

Q12. Which concept is best described by the following statement: “normal stresses acting on planes where shear stress is zero”?

  1. AIntermediate column
  2. BSection modulus
  3. CFlexure formula
  4. DPrincipal stresses
Show answer
Answer: D. Principal stressesPrincipal stresses: normal stresses acting on planes where shear stress is zero.
Report a mistake

Q13. In Strength of Materials, which statement about Principal stresses is correct?

  1. Anormal stresses acting on planes where shear stress is zero
  2. Bδ = PL/(AE) for constant axial load and linear elasticity
  3. Cintegrates the beam differential equation and uses boundary conditions to obtain slope and deflection
  4. Da stability failure involving lateral deflection of a compressed member
Show answer
Answer: A. normal stresses acting on planes where shear stress is zeroPrincipal stresses: normal stresses acting on planes where shear stress is zero.
Report a mistake

Q14. Select the correct relationship or description for Principal stresses.

  1. AdM/dx = V under the common sign convention
  2. Bnormal stresses acting on planes where shear stress is zero
  3. CLe = KL, where K depends on end restraint
  4. Dapproximately equal to the change in angle measured in radians
Show answer
Answer: B. normal stresses acting on planes where shear stress is zeroPrincipal stresses: normal stresses acting on planes where shear stress is zero.
Report a mistake

Q15. Which option correctly identifies Principal stresses?

  1. Aa moment that tends to twist a member about its longitudinal axis
  2. Ba member made of two or more materials constrained to deform compatibly
  3. Cnormal stresses acting on planes where shear stress is zero
  4. DS = I/c, where c is the distance to the extreme fiber
Show answer
Answer: C. normal stresses acting on planes where shear stress is zeroPrincipal stresses: normal stresses acting on planes where shear stress is zero.
Report a mistake

Q16. Which statement best describes Principal planes?

  1. Athe product AE, which resists axial deformation
  2. Bcauses a jump in the bending-moment diagram equal to the couple magnitude
  3. Cequals the radius of Mohr's circle for plane stress
  4. Dare orientations at which the in-plane shear stress vanishes
Show answer
Answer: D. are orientations at which the in-plane shear stress vanishesPrincipal planes: are orientations at which the in-plane shear stress vanishes.
Report a mistake

Q17. Which concept is best described by the following statement: “are orientations at which the in-plane shear stress vanishes”?

  1. APrincipal planes
  2. BSimply supported beam boundary condition
  3. CConnectors in built-up beams
  4. DPoint load effect on shear diagram
Show answer
Answer: A. Principal planesPrincipal planes: are orientations at which the in-plane shear stress vanishes.
Report a mistake

Q18. In Strength of Materials, which statement about Principal planes is correct?

  1. Aε_th = αΔT when thermal expansion is unrestrained
  2. Bare orientations at which the in-plane shear stress vanishes
  3. Cstress is proportional to strain within the proportional limit
  4. Da geometric property that influences resistance to bending deformation and stress
Show answer
Answer: B. are orientations at which the in-plane shear stress vanishesPrincipal planes: are orientations at which the in-plane shear stress vanishes.
Report a mistake

Q19. Select the correct relationship or description for Principal planes.

  1. AP = Tω
  2. Ba system requiring compatibility equations in addition to equilibrium
  3. Care orientations at which the in-plane shear stress vanishes
  4. Dhas behavior influenced by both material yielding and instability
Show answer
Answer: C. are orientations at which the in-plane shear stress vanishesPrincipal planes: are orientations at which the in-plane shear stress vanishes.
Report a mistake

Q20. Which option correctly identifies Principal planes?

  1. AEI times curvature is related to bending moment
  2. Bequals the radius of Mohr's circle for plane stress
  3. Ccommonly has a pin support and a roller support
  4. Dare orientations at which the in-plane shear stress vanishes
Show answer
Answer: D. are orientations at which the in-plane shear stress vanishesPrincipal planes: are orientations at which the in-plane shear stress vanishes.
Report a mistake

Q21. Which statement best describes Maximum in-plane shear stress?

  1. Aequals the radius of Mohr's circle for plane stress
  2. Ba member loaded primarily along its longitudinal centroidal axis
  3. Cshear force divided by resisting area, τ = V/A
  4. Dσ = Eε for a linear elastic material
Show answer
Answer: A. equals the radius of Mohr's circle for plane stressMaximum in-plane shear stress: equals the radius of Mohr's circle for plane stress.
Report a mistake

Q22. Which concept is best described by the following statement: “equals the radius of Mohr's circle for plane stress”?

  1. ANeutral axis in simple bending
  2. BMaximum in-plane shear stress
  3. CYoung's modulus
  4. DElastic limit
Show answer
Answer: B. Maximum in-plane shear stressMaximum in-plane shear stress: equals the radius of Mohr's circle for plane stress.
Report a mistake

Q23. In Strength of Materials, which statement about Maximum in-plane shear stress is correct?

  1. Acommonly has a pin support and a roller support
  2. Bdevelops shear stress over its cross section
  3. Cequals the radius of Mohr's circle for plane stress
  4. Dpasses through the centroid for a homogeneous prismatic beam under pure bending
Show answer
Answer: C. equals the radius of Mohr's circle for plane stressMaximum in-plane shear stress: equals the radius of Mohr's circle for plane stress.
Report a mistake

Q24. Select the correct relationship or description for Maximum in-plane shear stress.

  1. Avertical deflection is zero at ideal simple supports
  2. BPcr = π²EI/(KL)² for an ideal slender column
  3. Ca stress state in which stresses normal to one coordinate direction are negligible
  4. Dequals the radius of Mohr's circle for plane stress
Show answer
Answer: D. equals the radius of Mohr's circle for plane stressMaximum in-plane shear stress: equals the radius of Mohr's circle for plane stress.
Report a mistake

Q25. Which option correctly identifies Maximum in-plane shear stress?

  1. Aequals the radius of Mohr's circle for plane stress
  2. Boccurs at the outer surface of a solid circular shaft in elastic torsion
  3. Cshear stress acting tangentially to the resisting cross section
  4. Dnormal stress produced when an axial load pulls a member
Show answer
Answer: A. equals the radius of Mohr's circle for plane stressMaximum in-plane shear stress: equals the radius of Mohr's circle for plane stress.
Report a mistake

Q26. Which statement best describes Planes of maximum in-plane shear?

  1. Ar = sqrt(I/A)
  2. Bare oriented 45 degrees from the principal planes in stress transformation
  3. Care designed to transfer interface shear so the components act together
  4. DPcr = π²EI/(KL)² for an ideal slender column
Show answer
Answer: B. are oriented 45 degrees from the principal planes in stress transformationPlanes of maximum in-plane shear: are oriented 45 degrees from the principal planes in stress transformation.
Report a mistake

Q27. Which concept is best described by the following statement: “are oriented 45 degrees from the principal planes in stress transformation”?

  1. AUltimate tensile strength
  2. BAverage shear stress
  3. CPlanes of maximum in-plane shear
  4. DElastic curve
Show answer
Answer: C. Planes of maximum in-plane shearPlanes of maximum in-plane shear: are oriented 45 degrees from the principal planes in stress transformation.
Report a mistake

Q28. In Strength of Materials, which statement about Planes of maximum in-plane shear is correct?

  1. Ahas behavior influenced by both material yielding and instability
  2. Baxial force divided by the cross-sectional area, σ = P/A
  3. Cthe maximum engineering stress reached on a tensile stress-strain curve
  4. Dare oriented 45 degrees from the principal planes in stress transformation
Show answer
Answer: D. are oriented 45 degrees from the principal planes in stress transformationPlanes of maximum in-plane shear: are oriented 45 degrees from the principal planes in stress transformation.
Report a mistake

Q29. Select the correct relationship or description for Planes of maximum in-plane shear.

  1. Aare oriented 45 degrees from the principal planes in stress transformation
  2. Baxial force divided by the cross-sectional area, σ = P/A
  3. Chas behavior influenced by both material yielding and instability
  4. Da system requiring compatibility equations in addition to equilibrium
Show answer
Answer: A. are oriented 45 degrees from the principal planes in stress transformationPlanes of maximum in-plane shear: are oriented 45 degrees from the principal planes in stress transformation.
Report a mistake

Q30. Which option correctly identifies Planes of maximum in-plane shear?

  1. Aa bar in axial tension usually contracts laterally
  2. Bare oriented 45 degrees from the principal planes in stress transformation
  3. Cthe greatest stress that can be removed without permanent deformation
  4. Dadds responses from individual loads when behavior is linear elastic
Show answer
Answer: B. are oriented 45 degrees from the principal planes in stress transformationPlanes of maximum in-plane shear: are oriented 45 degrees from the principal planes in stress transformation.
Report a mistake

Q31. Which statement best describes Center of Mohr's circle for plane stress?

  1. Athe internal transverse force required for equilibrium of a cut segment
  2. Bσ = My/I for elastic bending of a prismatic beam under standard assumptions
  3. Clies at (σx + σy)/2 on the normal-stress axis
  4. Dchange in length divided by original length, ε = ΔL/L
Show answer
Answer: C. lies at (σx + σy)/2 on the normal-stress axisCenter of Mohr's circle for plane stress: lies at (σx + σy)/2 on the normal-stress axis.
Report a mistake

Q32. Which concept is best described by the following statement: “lies at (σx + σy)/2 on the normal-stress axis”?

  1. ABuilt-up beam
  2. BSlenderness ratio
  3. CSimply supported beam boundary condition
  4. DCenter of Mohr's circle for plane stress
Show answer
Answer: D. Center of Mohr's circle for plane stressCenter of Mohr's circle for plane stress: lies at (σx + σy)/2 on the normal-stress axis.
Report a mistake

Q33. In Strength of Materials, which statement about Center of Mohr's circle for plane stress is correct?

  1. Alies at (σx + σy)/2 on the normal-stress axis
  2. Bare determined from equilibrium for a statically determinate beam
  3. Cthe stress associated with the onset of significant plastic deformation
  4. Dε_th = αΔT when thermal expansion is unrestrained
Show answer
Answer: A. lies at (σx + σy)/2 on the normal-stress axisCenter of Mohr's circle for plane stress: lies at (σx + σy)/2 on the normal-stress axis.
Report a mistake

Q34. Select the correct relationship or description for Center of Mohr's circle for plane stress.

  1. Ahas compatible longitudinal strain at the interface between materials
  2. Blies at (σx + σy)/2 on the normal-stress axis
  3. Care oriented 45 degrees from the principal planes in stress transformation
  4. Dnormal stress produced when an axial load pulls a member
Show answer
Answer: B. lies at (σx + σy)/2 on the normal-stress axisCenter of Mohr's circle for plane stress: lies at (σx + σy)/2 on the normal-stress axis.
Report a mistake

Q35. Which option correctly identifies Center of Mohr's circle for plane stress?

  1. Athe product GJ
  2. Bchanges across the neutral axis, with one side in tension and the other in compression
  3. Clies at (σx + σy)/2 on the normal-stress axis
  4. Dthe algebraic sum of the twists of its individual segments
Show answer
Answer: C. lies at (σx + σy)/2 on the normal-stress axisCenter of Mohr's circle for plane stress: lies at (σx + σy)/2 on the normal-stress axis.
Report a mistake

Q36. Which statement best describes Radius of Mohr's circle?

  1. Anormal stresses acting on planes where shear stress is zero
  2. Bare orientations at which the in-plane shear stress vanishes
  3. Ca geometric property that influences resistance to bending deformation and stress
  4. Dequals the square root of [((σx-σy)/2)^2 + τxy^2]
Show answer
Answer: D. equals the square root of [((σx-σy)/2)^2 + τxy^2]Radius of Mohr's circle: equals the square root of [((σx-σy)/2)^2 + τxy^2].
Report a mistake

Q37. Which concept is best described by the following statement: “equals the square root of [((σx-σy)/2)^2 + τxy^2]”?

  1. ARadius of Mohr's circle
  2. BCentroidal neutral axis
  3. CRadius of gyration
  4. DBending moment at a section
Show answer
Answer: A. Radius of Mohr's circleRadius of Mohr's circle: equals the square root of [((σx-σy)/2)^2 + τxy^2].
Report a mistake

Q38. In Strength of Materials, which statement about Radius of Mohr's circle is correct?

  1. Aintegrates the beam differential equation and uses boundary conditions to obtain slope and deflection
  2. Bequals the square root of [((σx-σy)/2)^2 + τxy^2]
  3. Care designed to transfer interface shear so the components act together
  4. Dis the same through segments between applied torques when no intermediate torque is applied
Show answer
Answer: B. equals the square root of [((σx-σy)/2)^2 + τxy^2]Radius of Mohr's circle: equals the square root of [((σx-σy)/2)^2 + τxy^2].
Report a mistake

Q39. Select the correct relationship or description for Radius of Mohr's circle.

  1. Athe ability of a material to undergo permanent deformation without rupture
  2. Btangential deviation is related to the first moment of the M/EI area
  3. Cequals the square root of [((σx-σy)/2)^2 + τxy^2]
  4. Da member made of two or more materials constrained to deform compatibly
Show answer
Answer: C. equals the square root of [((σx-σy)/2)^2 + τxy^2]Radius of Mohr's circle: equals the square root of [((σx-σy)/2)^2 + τxy^2].
Report a mistake

Q40. Which option correctly identifies Radius of Mohr's circle?

  1. Aa moment that tends to twist a member about its longitudinal axis
  2. Badds responses from individual loads when behavior is linear elastic
  3. Cδ = PL/(AE) for constant axial load and linear elasticity
  4. Dequals the square root of [((σx-σy)/2)^2 + τxy^2]
Show answer
Answer: D. equals the square root of [((σx-σy)/2)^2 + τxy^2]Radius of Mohr's circle: equals the square root of [((σx-σy)/2)^2 + τxy^2].
Report a mistake

Q41. Which statement best describes Combined loading?

  1. Arequires superposition of stress components when linear elastic assumptions apply
  2. Blies at (σx + σy)/2 on the normal-stress axis
  3. Cdevelops shear stress over its cross section
  4. Dare designed to transfer interface shear so the components act together
Show answer
Answer: A. requires superposition of stress components when linear elastic assumptions applyCombined loading: requires superposition of stress components when linear elastic assumptions apply.
Report a mistake

Q42. Which concept is best described by the following statement: “requires superposition of stress components when linear elastic assumptions apply”?

  1. ACritical buckling load
  2. BCombined loading
  3. CPoisson's ratio
  4. DShear-moment differential relation
Show answer
Answer: B. Combined loadingCombined loading: requires superposition of stress components when linear elastic assumptions apply.
Report a mistake

Q43. In Strength of Materials, which statement about Combined loading is correct?

  1. Aequals the radius of Mohr's circle for plane stress
  2. Bequals load intensity times loaded length and acts at the midpoint of that length
  3. Crequires superposition of stress components when linear elastic assumptions apply
  4. DKL/r, where r is the radius of gyration
Show answer
Answer: C. requires superposition of stress components when linear elastic assumptions applyCombined loading: requires superposition of stress components when linear elastic assumptions apply.
Report a mistake

Q44. Select the correct relationship or description for Combined loading.

  1. Aσ = Eε for a linear elastic material
  2. Boccurs at the extreme fiber farthest from the neutral axis
  3. Ca stability failure involving lateral deflection of a compressed member
  4. Drequires superposition of stress components when linear elastic assumptions apply
Show answer
Answer: D. requires superposition of stress components when linear elastic assumptions applyCombined loading: requires superposition of stress components when linear elastic assumptions apply.
Report a mistake

Q45. Which option correctly identifies Combined loading?

  1. Arequires superposition of stress components when linear elastic assumptions apply
  2. Bthe line in the cross section where longitudinal bending stress is zero
  3. Cthe stress associated with the onset of significant plastic deformation
  4. Da system requiring compatibility equations in addition to equilibrium
Show answer
Answer: A. requires superposition of stress components when linear elastic assumptions applyCombined loading: requires superposition of stress components when linear elastic assumptions apply.
Report a mistake

Q46. Which statement best describes Eccentric axial load?

  1. Aequals the radius of Mohr's circle for plane stress
  2. Bcan produce both direct normal stress and bending stress
  3. Care designed to transfer interface shear so the components act together
  4. Dpasses through the centroid for a homogeneous prismatic beam under pure bending
Show answer
Answer: B. can produce both direct normal stress and bending stressEccentric axial load: can produce both direct normal stress and bending stress.
Report a mistake

Q47. Which concept is best described by the following statement: “can produce both direct normal stress and bending stress”?

  1. ADistributed load
  2. BPlane stress
  3. CEccentric axial load
  4. DSecond moment of area
Show answer
Answer: C. Eccentric axial loadEccentric axial load: can produce both direct normal stress and bending stress.
Report a mistake

Q48. In Strength of Materials, which statement about Eccentric axial load is correct?

  1. Aequals load intensity times loaded length and acts at the midpoint of that length
  2. Bangular distortion produced by shear stress
  3. CT/J = τ/r = Gθ/L for a prismatic circular shaft
  4. Dcan produce both direct normal stress and bending stress
Show answer
Answer: D. can produce both direct normal stress and bending stressEccentric axial load: can produce both direct normal stress and bending stress.
Report a mistake

Q49. Select the correct relationship or description for Eccentric axial load.

  1. Acan produce both direct normal stress and bending stress
  2. Bdeformation that remains after the load is removed
  3. Cequals the radius of Mohr's circle for plane stress
  4. Dconverts one material area to an equivalent area of another material using a modular ratio
Show answer
Answer: A. can produce both direct normal stress and bending stressEccentric axial load: can produce both direct normal stress and bending stress.
Report a mistake

Q50. Which option correctly identifies Eccentric axial load?

  1. Aare orientations at which the in-plane shear stress vanishes
  2. Bcan produce both direct normal stress and bending stress
  3. Cthe product AE, which resists axial deformation
  4. Dgeometric deformation conditions used with force-deformation relations
Show answer
Answer: B. can produce both direct normal stress and bending stressEccentric axial load: can produce both direct normal stress and bending stress.
Report a mistake