Civil Engineering · Strength of Materials

Unit 6: Bending Stress MCQs

50 solved multiple choice questions with answers and short explanations.

Q1. Which statement best describes Flexure formula?

  1. Athe ability of a material to undergo permanent deformation without rupture
  2. Bwithin the linear elastic range, stress is proportional to strain
  3. Cσ = My/I for elastic bending of a prismatic beam under standard assumptions
  4. Dequals the square root of [((σx-σy)/2)^2 + τxy^2]
Show answer
Answer: C. σ = My/I for elastic bending of a prismatic beam under standard assumptionsFlexure formula: σ = My/I for elastic bending of a prismatic beam under standard assumptions.
Report a mistake

Q2. Which concept is best described by the following statement: “σ = My/I for elastic bending of a prismatic beam under standard assumptions”?

  1. AMoment-curvature relation for small elastic bending
  2. BPinned-pinned ideal column
  3. CPlanes of maximum in-plane shear
  4. DFlexure formula
Show answer
Answer: D. Flexure formulaFlexure formula: σ = My/I for elastic bending of a prismatic beam under standard assumptions.
Report a mistake

Q3. In Strength of Materials, which statement about Flexure formula is correct?

  1. Aσ = My/I for elastic bending of a prismatic beam under standard assumptions
  2. BLe = KL, where K depends on end restraint
  3. Cdeformation that remains after the load is removed
  4. Dthe ability of a material to recover its original dimensions after unloading
Show answer
Answer: A. σ = My/I for elastic bending of a prismatic beam under standard assumptionsFlexure formula: σ = My/I for elastic bending of a prismatic beam under standard assumptions.
Report a mistake

Q4. Select the correct relationship or description for Flexure formula.

  1. AdV/dx = -w under the common sign convention
  2. Bσ = My/I for elastic bending of a prismatic beam under standard assumptions
  3. Cthe algebraic sum of the twists of its individual segments
  4. Doccurs at the outer surface of a solid circular shaft in elastic torsion
Show answer
Answer: B. σ = My/I for elastic bending of a prismatic beam under standard assumptionsFlexure formula: σ = My/I for elastic bending of a prismatic beam under standard assumptions.
Report a mistake

Q5. Which option correctly identifies Flexure formula?

  1. Aare orientations at which the in-plane shear stress vanishes
  2. Ba member made of two or more materials constrained to deform compatibly
  3. Cσ = My/I for elastic bending of a prismatic beam under standard assumptions
  4. Dthe ability of a material to undergo permanent deformation without rupture
Show answer
Answer: C. σ = My/I for elastic bending of a prismatic beam under standard assumptionsFlexure formula: σ = My/I for elastic bending of a prismatic beam under standard assumptions.
Report a mistake

Q6. Which statement best describes Bending stress variation?

  1. Aa system requiring compatibility equations in addition to equilibrium
  2. Bthe resultant normal force obtained from equilibrium of a cut section
  3. Ca stability failure involving lateral deflection of a compressed member
  4. Dis linear with distance from the neutral axis in simple elastic bending
Show answer
Answer: D. is linear with distance from the neutral axis in simple elastic bendingBending stress variation: is linear with distance from the neutral axis in simple elastic bending.
Report a mistake

Q7. Which concept is best described by the following statement: “is linear with distance from the neutral axis in simple elastic bending”?

  1. ABending stress variation
  2. BTransverse shear in a beam
  3. CMaximum torsional shear stress
  4. DAxial deformation of a uniform bar
Show answer
Answer: A. Bending stress variationBending stress variation: is linear with distance from the neutral axis in simple elastic bending.
Report a mistake

Q8. In Strength of Materials, which statement about Bending stress variation is correct?

  1. Aintegrates the beam differential equation and uses boundary conditions to obtain slope and deflection
  2. Bis linear with distance from the neutral axis in simple elastic bending
  3. CLe = KL, where K depends on end restraint
  4. Dis parabolic over the depth and maximum at the neutral axis
Show answer
Answer: B. is linear with distance from the neutral axis in simple elastic bendingBending stress variation: is linear with distance from the neutral axis in simple elastic bending.
Report a mistake

Q9. Select the correct relationship or description for Bending stress variation.

  1. Athe axial compressive load at which an ideal column becomes unstable
  2. Boccurs at the outer surface of a solid circular shaft in elastic torsion
  3. Cis linear with distance from the neutral axis in simple elastic bending
  4. Dapproximately equal to the change in angle measured in radians
Show answer
Answer: C. is linear with distance from the neutral axis in simple elastic bendingBending stress variation: is linear with distance from the neutral axis in simple elastic bending.
Report a mistake

Q10. Which option correctly identifies Bending stress variation?

  1. Arequires superposition of stress components when linear elastic assumptions apply
  2. Bthe structural response must be linear
  3. Ccommonly has a pin support and a roller support
  4. Dis linear with distance from the neutral axis in simple elastic bending
Show answer
Answer: D. is linear with distance from the neutral axis in simple elastic bendingBending stress variation: is linear with distance from the neutral axis in simple elastic bending.
Report a mistake

Q11. Which statement best describes Neutral axis in simple bending?

  1. Athe line in the cross section where longitudinal bending stress is zero
  2. Bwithin the linear elastic range, stress is proportional to strain
  3. Chas compatible longitudinal strain at the interface between materials
  4. Dare commonly represented by σx, σy, and τxy
Show answer
Answer: A. the line in the cross section where longitudinal bending stress is zeroNeutral axis in simple bending: the line in the cross section where longitudinal bending stress is zero.
Report a mistake

Q12. Which concept is best described by the following statement: “the line in the cross section where longitudinal bending stress is zero”?

  1. ATransverse shear in a beam
  2. BNeutral axis in simple bending
  3. CMaximum in-plane shear stress
  4. DPlasticity
Show answer
Answer: B. Neutral axis in simple bendingNeutral axis in simple bending: the line in the cross section where longitudinal bending stress is zero.
Report a mistake

Q13. In Strength of Materials, which statement about Neutral axis in simple bending is correct?

  1. Ais assembled from multiple components that must transfer longitudinal shear between them
  2. Bthe algebraic sum of the twists of its individual segments
  3. Cthe line in the cross section where longitudinal bending stress is zero
  4. Dθ = TL/(GJ) in linear elastic torsion
Show answer
Answer: C. the line in the cross section where longitudinal bending stress is zeroNeutral axis in simple bending: the line in the cross section where longitudinal bending stress is zero.
Report a mistake

Q14. Select the correct relationship or description for Neutral axis in simple bending.

  1. Ageometric deformation conditions used with force-deformation relations
  2. Bthe product AE, which resists axial deformation
  3. Carises from internal shear force acting across the cross section
  4. Dthe line in the cross section where longitudinal bending stress is zero
Show answer
Answer: D. the line in the cross section where longitudinal bending stress is zeroNeutral axis in simple bending: the line in the cross section where longitudinal bending stress is zero.
Report a mistake

Q15. Which option correctly identifies Neutral axis in simple bending?

  1. Athe line in the cross section where longitudinal bending stress is zero
  2. Bτ = q/t
  3. CdM/dx = V under the common sign convention
  4. Dare commonly represented by σx, σy, and τxy
Show answer
Answer: A. the line in the cross section where longitudinal bending stress is zeroNeutral axis in simple bending: the line in the cross section where longitudinal bending stress is zero.
Report a mistake

Q16. Which statement best describes Centroidal neutral axis?

  1. Athe deflected shape of a beam's neutral axis
  2. Bpasses through the centroid for a homogeneous prismatic beam under pure bending
  3. Ca member made of two or more materials constrained to deform compatibly
  4. Doccurs at the extreme fiber farthest from the neutral axis
Show answer
Answer: B. passes through the centroid for a homogeneous prismatic beam under pure bendingCentroidal neutral axis: passes through the centroid for a homogeneous prismatic beam under pure bending.
Report a mistake

Q17. Which concept is best described by the following statement: “passes through the centroid for a homogeneous prismatic beam under pure bending”?

  1. ASimply supported beam boundary condition
  2. BSmall shear strain
  3. CCentroidal neutral axis
  4. DMaximum torsional shear stress
Show answer
Answer: C. Centroidal neutral axisCentroidal neutral axis: passes through the centroid for a homogeneous prismatic beam under pure bending.
Report a mistake

Q18. In Strength of Materials, which statement about Centroidal neutral axis is correct?

  1. Aω = 2πN/60 when N is in revolutions per minute
  2. Bτ = q/t
  3. Cequals load intensity times loaded length and acts at the midpoint of that length
  4. Dpasses through the centroid for a homogeneous prismatic beam under pure bending
Show answer
Answer: D. passes through the centroid for a homogeneous prismatic beam under pure bendingCentroidal neutral axis: passes through the centroid for a homogeneous prismatic beam under pure bending.
Report a mistake

Q19. Select the correct relationship or description for Centroidal neutral axis.

  1. Apasses through the centroid for a homogeneous prismatic beam under pure bending
  2. Blies at (σx + σy)/2 on the normal-stress axis
  3. CdM/dx = V under the common sign convention
  4. Dangular distortion produced by shear stress
Show answer
Answer: A. passes through the centroid for a homogeneous prismatic beam under pure bendingCentroidal neutral axis: passes through the centroid for a homogeneous prismatic beam under pure bending.
Report a mistake

Q20. Which option correctly identifies Centroidal neutral axis?

  1. Aa member loaded primarily along its longitudinal centroidal axis
  2. Bpasses through the centroid for a homogeneous prismatic beam under pure bending
  3. Care designed to transfer interface shear so the components act together
  4. Da moment that tends to twist a member about its longitudinal axis
Show answer
Answer: B. passes through the centroid for a homogeneous prismatic beam under pure bendingCentroidal neutral axis: passes through the centroid for a homogeneous prismatic beam under pure bending.
Report a mistake

Q21. Which statement best describes Second moment of area?

  1. Ageometric deformation conditions used with force-deformation relations
  2. Baxial force divided by the cross-sectional area, σ = P/A
  3. Ca geometric property that influences resistance to bending deformation and stress
  4. Dσ = My/I for elastic bending of a prismatic beam under standard assumptions
Show answer
Answer: C. a geometric property that influences resistance to bending deformation and stressSecond moment of area: a geometric property that influences resistance to bending deformation and stress.
Report a mistake

Q22. Which concept is best described by the following statement: “a geometric property that influences resistance to bending deformation and stress”?

  1. AElastic torsion formula
  2. BNormal strain
  3. CPrincipal planes
  4. DSecond moment of area
Show answer
Answer: D. Second moment of areaSecond moment of area: a geometric property that influences resistance to bending deformation and stress.
Report a mistake

Q23. In Strength of Materials, which statement about Second moment of area is correct?

  1. Aa geometric property that influences resistance to bending deformation and stress
  2. Bis linear with distance from the neutral axis in simple elastic bending
  3. Cq = VQ/I and has units of force per unit length
  4. Dequals the square root of [((σx-σy)/2)^2 + τxy^2]
Show answer
Answer: A. a geometric property that influences resistance to bending deformation and stressSecond moment of area: a geometric property that influences resistance to bending deformation and stress.
Report a mistake

Q24. Select the correct relationship or description for Second moment of area.

  1. Ar = sqrt(I/A)
  2. Ba geometric property that influences resistance to bending deformation and stress
  3. Cis generally nonuniform over the depth of a typical beam cross section
  4. Dequals load intensity times loaded length and acts at the midpoint of that length
Show answer
Answer: B. a geometric property that influences resistance to bending deformation and stressSecond moment of area: a geometric property that influences resistance to bending deformation and stress.
Report a mistake

Q25. Which option correctly identifies Second moment of area?

  1. Aa member made of two or more materials constrained to deform compatibly
  2. Bτ = q/t
  3. Ca geometric property that influences resistance to bending deformation and stress
  4. Dthe product GJ
Show answer
Answer: C. a geometric property that influences resistance to bending deformation and stressSecond moment of area: a geometric property that influences resistance to bending deformation and stress.
Report a mistake

Q26. Which statement best describes Section modulus?

  1. Aa member made of two or more materials constrained to deform compatibly
  2. Br = sqrt(I/A)
  3. Cthe line in the cross section where longitudinal bending stress is zero
  4. DS = I/c, where c is the distance to the extreme fiber
Show answer
Answer: D. S = I/c, where c is the distance to the extreme fiberSection modulus: S = I/c, where c is the distance to the extreme fiber.
Report a mistake

Q27. Which concept is best described by the following statement: “S = I/c, where c is the distance to the extreme fiber”?

  1. ASection modulus
  2. BBending stress variation
  3. CEffective length
  4. DSecond moment of area
Show answer
Answer: A. Section modulusSection modulus: S = I/c, where c is the distance to the extreme fiber.
Report a mistake

Q28. In Strength of Materials, which statement about Section modulus is correct?

  1. Arequires superposition of stress components when linear elastic assumptions apply
  2. BS = I/c, where c is the distance to the extreme fiber
  3. Cnormal stress produced when an axial load pulls a member
  4. Dis zero
Show answer
Answer: B. S = I/c, where c is the distance to the extreme fiberSection modulus: S = I/c, where c is the distance to the extreme fiber.
Report a mistake

Q29. Select the correct relationship or description for Section modulus.

  1. Ashear stress acting tangentially to the resisting cross section
  2. Bthe ability of a material to recover its original dimensions after unloading
  3. CS = I/c, where c is the distance to the extreme fiber
  4. Dchange in slope equals the area under the M/EI diagram between two points
Show answer
Answer: C. S = I/c, where c is the distance to the extreme fiberSection modulus: S = I/c, where c is the distance to the extreme fiber.
Report a mistake

Q30. Which option correctly identifies Section modulus?

  1. Ahas effective-length factor K = 1
  2. Bthe internal transverse force required for equilibrium of a cut segment
  3. Ca member loaded primarily along its longitudinal centroidal axis
  4. DS = I/c, where c is the distance to the extreme fiber
Show answer
Answer: D. S = I/c, where c is the distance to the extreme fiberSection modulus: S = I/c, where c is the distance to the extreme fiber.
Report a mistake

Q31. Which statement best describes Maximum elastic bending stress?

  1. Aoccurs at the extreme fiber farthest from the neutral axis
  2. Bthe resultant normal force obtained from equilibrium of a cut section
  3. Cis parabolic over the depth and maximum at the neutral axis
  4. Dangular distortion produced by shear stress
Show answer
Answer: A. occurs at the extreme fiber farthest from the neutral axisMaximum elastic bending stress: occurs at the extreme fiber farthest from the neutral axis.
Report a mistake

Q32. Which concept is best described by the following statement: “occurs at the extreme fiber farthest from the neutral axis”?

  1. AElastic curve
  2. BMaximum elastic bending stress
  3. CBeam shear stress
  4. DInternal axial force
Show answer
Answer: B. Maximum elastic bending stressMaximum elastic bending stress: occurs at the extreme fiber farthest from the neutral axis.
Report a mistake

Q33. In Strength of Materials, which statement about Maximum elastic bending stress is correct?

  1. Aare oriented 45 degrees from the principal planes in stress transformation
  2. Bwithin the linear elastic range, stress is proportional to strain
  3. Coccurs at the extreme fiber farthest from the neutral axis
  4. Dare determined from beam boundary and continuity conditions
Show answer
Answer: C. occurs at the extreme fiber farthest from the neutral axisMaximum elastic bending stress: occurs at the extreme fiber farthest from the neutral axis.
Report a mistake

Q34. Select the correct relationship or description for Maximum elastic bending stress.

  1. Aa load spread continuously along a length and expressed as force per unit length
  2. Bis generally nonuniform over the depth of a typical beam cross section
  3. Cequals load intensity times loaded length and acts at the midpoint of that length
  4. Doccurs at the extreme fiber farthest from the neutral axis
Show answer
Answer: D. occurs at the extreme fiber farthest from the neutral axisMaximum elastic bending stress: occurs at the extreme fiber farthest from the neutral axis.
Report a mistake

Q35. Which option correctly identifies Maximum elastic bending stress?

  1. Aoccurs at the extreme fiber farthest from the neutral axis
  2. Ba geometric property that influences resistance to bending deformation and stress
  3. Cthe ability of a material to recover its original dimensions after unloading
  4. Dare determined from equilibrium for a statically determinate beam
Show answer
Answer: A. occurs at the extreme fiber farthest from the neutral axisMaximum elastic bending stress: occurs at the extreme fiber farthest from the neutral axis.
Report a mistake

Q36. Which statement best describes Sign of bending stress?

  1. AP = Tω
  2. Bchanges across the neutral axis, with one side in tension and the other in compression
  3. CPcr = π²EI/(KL)² for an ideal slender column
  4. Dthe internal transverse force required for equilibrium of a cut segment
Show answer
Answer: B. changes across the neutral axis, with one side in tension and the other in compressionSign of bending stress: changes across the neutral axis, with one side in tension and the other in compression.
Report a mistake

Q37. Which concept is best described by the following statement: “changes across the neutral axis, with one side in tension and the other in compression”?

  1. AEuler theory limitation
  2. BCritical buckling load
  3. CSign of bending stress
  4. DFirst moment Q in the shear formula
Show answer
Answer: C. Sign of bending stressSign of bending stress: changes across the neutral axis, with one side in tension and the other in compression.
Report a mistake

Q38. In Strength of Materials, which statement about Sign of bending stress is correct?

  1. Aa stability failure involving lateral deflection of a compressed member
  2. Br = sqrt(I/A)
  3. Cthe axial compressive load at which an ideal column becomes unstable
  4. Dchanges across the neutral axis, with one side in tension and the other in compression
Show answer
Answer: D. changes across the neutral axis, with one side in tension and the other in compressionSign of bending stress: changes across the neutral axis, with one side in tension and the other in compression.
Report a mistake

Q39. Select the correct relationship or description for Sign of bending stress.

  1. Achanges across the neutral axis, with one side in tension and the other in compression
  2. Bthe algebraic sum of the twists of its individual segments
  3. Cτ = q/t
  4. Dthe line in the cross section where longitudinal bending stress is zero
Show answer
Answer: A. changes across the neutral axis, with one side in tension and the other in compressionSign of bending stress: changes across the neutral axis, with one side in tension and the other in compression.
Report a mistake

Q40. Which option correctly identifies Sign of bending stress?

  1. Acommonly has a pin support and a roller support
  2. Bchanges across the neutral axis, with one side in tension and the other in compression
  3. Care orientations at which the in-plane shear stress vanishes
  4. Dnormal stresses acting on planes where shear stress is zero
Show answer
Answer: B. changes across the neutral axis, with one side in tension and the other in compressionSign of bending stress: changes across the neutral axis, with one side in tension and the other in compression.
Report a mistake

Q41. Which statement best describes Transformed-section method?

  1. Aangular distortion produced by shear stress
  2. Ba load spread continuously along a length and expressed as force per unit length
  3. Cconverts one material area to an equivalent area of another material using a modular ratio
  4. Dis the same through segments between applied torques when no intermediate torque is applied
Show answer
Answer: C. converts one material area to an equivalent area of another material using a modular ratioTransformed-section method: converts one material area to an equivalent area of another material using a modular ratio.
Report a mistake

Q42. Which concept is best described by the following statement: “converts one material area to an equivalent area of another material using a modular ratio”?

  1. AComposite axial member
  2. BAxial member
  3. CCentroidal neutral axis
  4. DTransformed-section method
Show answer
Answer: D. Transformed-section methodTransformed-section method: converts one material area to an equivalent area of another material using a modular ratio.
Report a mistake

Q43. In Strength of Materials, which statement about Transformed-section method is correct?

  1. Aconverts one material area to an equivalent area of another material using a modular ratio
  2. Bis the first moment of the relevant partial area about the neutral axis
  3. Cσ = My/I for elastic bending of a prismatic beam under standard assumptions
  4. Dis most appropriate for long, slender columns that buckle elastically
Show answer
Answer: A. converts one material area to an equivalent area of another material using a modular ratioTransformed-section method: converts one material area to an equivalent area of another material using a modular ratio.
Report a mistake

Q44. Select the correct relationship or description for Transformed-section method.

  1. Anormal stresses acting on planes where shear stress is zero
  2. Bconverts one material area to an equivalent area of another material using a modular ratio
  3. Cis zero
  4. Da member loaded primarily along its longitudinal centroidal axis
Show answer
Answer: B. converts one material area to an equivalent area of another material using a modular ratioTransformed-section method: converts one material area to an equivalent area of another material using a modular ratio.
Report a mistake

Q45. Which option correctly identifies Transformed-section method?

  1. Aaxial force divided by the cross-sectional area, σ = P/A
  2. Bis generally nonuniform over the depth of a typical beam cross section
  3. Cconverts one material area to an equivalent area of another material using a modular ratio
  4. Da load spread continuously along a length and expressed as force per unit length
Show answer
Answer: C. converts one material area to an equivalent area of another material using a modular ratioTransformed-section method: converts one material area to an equivalent area of another material using a modular ratio.
Report a mistake

Q46. Which statement best describes Perfectly bonded composite beam?

  1. Aδ = PL/(AE) for constant axial load and linear elasticity
  2. Bis proportional to flexural rigidity EI and inversely proportional to effective length squared
  3. Cvertical deflection is zero at ideal simple supports
  4. Dhas compatible longitudinal strain at the interface between materials
Show answer
Answer: D. has compatible longitudinal strain at the interface between materialsPerfectly bonded composite beam: has compatible longitudinal strain at the interface between materials.
Report a mistake

Q47. Which concept is best described by the following statement: “has compatible longitudinal strain at the interface between materials”?

  1. APerfectly bonded composite beam
  2. BIntermediate column
  3. CYield strength
  4. DSimply supported beam boundary condition
Show answer
Answer: A. Perfectly bonded composite beamPerfectly bonded composite beam: has compatible longitudinal strain at the interface between materials.
Report a mistake

Q48. In Strength of Materials, which statement about Perfectly bonded composite beam is correct?

  1. Ashear force divided by resisting area, τ = V/A
  2. Bhas compatible longitudinal strain at the interface between materials
  3. Cτ = VQ/(It) under standard beam assumptions
  4. Dthe maximum engineering stress reached on a tensile stress-strain curve
Show answer
Answer: B. has compatible longitudinal strain at the interface between materialsPerfectly bonded composite beam: has compatible longitudinal strain at the interface between materials.
Report a mistake

Q49. Select the correct relationship or description for Perfectly bonded composite beam.

  1. Achanges across the neutral axis, with one side in tension and the other in compression
  2. Bare designed to transfer interface shear so the components act together
  3. Chas compatible longitudinal strain at the interface between materials
  4. Dis assembled from multiple components that must transfer longitudinal shear between them
Show answer
Answer: C. has compatible longitudinal strain at the interface between materialsPerfectly bonded composite beam: has compatible longitudinal strain at the interface between materials.
Report a mistake

Q50. Which option correctly identifies Perfectly bonded composite beam?

  1. Athe negative ratio of lateral strain to longitudinal strain
  2. Bwithin the linear elastic range, stress is proportional to strain
  3. Cδ = PL/(AE) for constant axial load and linear elasticity
  4. Dhas compatible longitudinal strain at the interface between materials
Show answer
Answer: D. has compatible longitudinal strain at the interface between materialsPerfectly bonded composite beam: has compatible longitudinal strain at the interface between materials.
Report a mistake