Civil Engineering · Strength of Materials

Unit 4: Torsion MCQs

50 solved multiple choice questions with answers and short explanations.

Q1. Which statement best describes Torque?

  1. Aare orientations at which the in-plane shear stress vanishes
  2. Bthe ability of a material to recover its original dimensions after unloading
  3. Ca moment that tends to twist a member about its longitudinal axis
  4. Dthe axial compressive load at which an ideal column becomes unstable
Show answer
Answer: C. a moment that tends to twist a member about its longitudinal axisTorque: a moment that tends to twist a member about its longitudinal axis.
Report a mistake

Q2. Which concept is best described by the following statement: “a moment that tends to twist a member about its longitudinal axis”?

  1. ANormal stress
  2. BPower transmitted by a rotating shaft
  3. CNeutral axis in simple bending
  4. DTorque
Show answer
Answer: D. TorqueTorque: a moment that tends to twist a member about its longitudinal axis.
Report a mistake

Q3. In Strength of Materials, which statement about Torque is correct?

  1. Aa moment that tends to twist a member about its longitudinal axis
  2. Bgeometric deformation conditions used with force-deformation relations
  3. Care determined from beam boundary and continuity conditions
  4. Da member made of two or more materials constrained to deform compatibly
Show answer
Answer: A. a moment that tends to twist a member about its longitudinal axisTorque: a moment that tends to twist a member about its longitudinal axis.
Report a mistake

Q4. Select the correct relationship or description for Torque.

  1. Awithin the linear elastic range, stress is proportional to strain
  2. Ba moment that tends to twist a member about its longitudinal axis
  3. Care oriented 45 degrees from the principal planes in stress transformation
  4. Dconverts one material area to an equivalent area of another material using a modular ratio
Show answer
Answer: B. a moment that tends to twist a member about its longitudinal axisTorque: a moment that tends to twist a member about its longitudinal axis.
Report a mistake

Q5. Which option correctly identifies Torque?

  1. Adevelops shear stress over its cross section
  2. Btangential deviation is related to the first moment of the M/EI area
  3. Ca moment that tends to twist a member about its longitudinal axis
  4. Dare determined from beam boundary and continuity conditions
Show answer
Answer: C. a moment that tends to twist a member about its longitudinal axisTorque: a moment that tends to twist a member about its longitudinal axis.
Report a mistake

Q6. Which statement best describes Circular shaft in pure torsion?

  1. Anormal stress produced when an axial load pulls a member
  2. Btangential deviation is related to the first moment of the M/EI area
  3. CT/J = τ/r = Gθ/L for a prismatic circular shaft
  4. Ddevelops shear stress over its cross section
Show answer
Answer: D. develops shear stress over its cross sectionCircular shaft in pure torsion: develops shear stress over its cross section.
Report a mistake

Q7. Which concept is best described by the following statement: “develops shear stress over its cross section”?

  1. ACircular shaft in pure torsion
  2. BLoad sharing in a bonded composite bar
  3. CSecond moment-area theorem
  4. DConnectors in built-up beams
Show answer
Answer: A. Circular shaft in pure torsionCircular shaft in pure torsion: develops shear stress over its cross section.
Report a mistake

Q8. In Strength of Materials, which statement about Circular shaft in pure torsion is correct?

  1. Athe internal transverse force required for equilibrium of a cut segment
  2. Bdevelops shear stress over its cross section
  3. Care determined from beam boundary and continuity conditions
  4. Dlies at (σx + σy)/2 on the normal-stress axis
Show answer
Answer: B. develops shear stress over its cross sectionCircular shaft in pure torsion: develops shear stress over its cross section.
Report a mistake

Q9. Select the correct relationship or description for Circular shaft in pure torsion.

  1. Ais parabolic over the depth and maximum at the neutral axis
  2. Bθ = TL/(GJ) in linear elastic torsion
  3. Cdevelops shear stress over its cross section
  4. Dpasses through the centroid for a homogeneous prismatic beam under pure bending
Show answer
Answer: C. develops shear stress over its cross sectionCircular shaft in pure torsion: develops shear stress over its cross section.
Report a mistake

Q10. Which option correctly identifies Circular shaft in pure torsion?

  1. Anormal stresses acting on planes where shear stress is zero
  2. Barises from internal shear force acting across the cross section
  3. Ca geometric property that influences resistance to bending deformation and stress
  4. Ddevelops shear stress over its cross section
Show answer
Answer: D. develops shear stress over its cross sectionCircular shaft in pure torsion: develops shear stress over its cross section.
Report a mistake

Q11. Which statement best describes Elastic torsion formula?

  1. AT/J = τ/r = Gθ/L for a prismatic circular shaft
  2. Bτ = VQ/(It) under standard beam assumptions
  3. Cthe stress associated with the onset of significant plastic deformation
  4. Dis linear with distance from the neutral axis in simple elastic bending
Show answer
Answer: A. T/J = τ/r = Gθ/L for a prismatic circular shaftElastic torsion formula: T/J = τ/r = Gθ/L for a prismatic circular shaft.
Report a mistake

Q12. Which concept is best described by the following statement: “T/J = τ/r = Gθ/L for a prismatic circular shaft”?

  1. AConnectors in built-up beams
  2. BElastic torsion formula
  3. CAxial member
  4. DSecond moment of area
Show answer
Answer: B. Elastic torsion formulaElastic torsion formula: T/J = τ/r = Gθ/L for a prismatic circular shaft.
Report a mistake

Q13. In Strength of Materials, which statement about Elastic torsion formula is correct?

  1. Athe greatest stress that can be removed without permanent deformation
  2. Bdevelops shear stress over its cross section
  3. CT/J = τ/r = Gθ/L for a prismatic circular shaft
  4. Dpasses through the centroid for a homogeneous prismatic beam under pure bending
Show answer
Answer: C. T/J = τ/r = Gθ/L for a prismatic circular shaftElastic torsion formula: T/J = τ/r = Gθ/L for a prismatic circular shaft.
Report a mistake

Q14. Select the correct relationship or description for Elastic torsion formula.

  1. Ais most appropriate for long, slender columns that buckle elastically
  2. Bchange in length divided by original length, ε = ΔL/L
  3. Cτ = q/t
  4. DT/J = τ/r = Gθ/L for a prismatic circular shaft
Show answer
Answer: D. T/J = τ/r = Gθ/L for a prismatic circular shaftElastic torsion formula: T/J = τ/r = Gθ/L for a prismatic circular shaft.
Report a mistake

Q15. Which option correctly identifies Elastic torsion formula?

  1. AT/J = τ/r = Gθ/L for a prismatic circular shaft
  2. Bnormal stress produced when an axial load pulls a member
  3. Cchange in slope equals the area under the M/EI diagram between two points
  4. Dthe ability of a material to undergo permanent deformation without rupture
Show answer
Answer: A. T/J = τ/r = Gθ/L for a prismatic circular shaftElastic torsion formula: T/J = τ/r = Gθ/L for a prismatic circular shaft.
Report a mistake

Q16. Which statement best describes Maximum torsional shear stress?

  1. Aτ = q/t
  2. Boccurs at the outer surface of a solid circular shaft in elastic torsion
  3. Cconverts one material area to an equivalent area of another material using a modular ratio
  4. Dthe greatest stress that can be removed without permanent deformation
Show answer
Answer: B. occurs at the outer surface of a solid circular shaft in elastic torsionMaximum torsional shear stress: occurs at the outer surface of a solid circular shaft in elastic torsion.
Report a mistake

Q17. Which concept is best described by the following statement: “occurs at the outer surface of a solid circular shaft in elastic torsion”?

  1. AAverage shear stress
  2. BAxial deformation of a uniform bar
  3. CMaximum torsional shear stress
  4. DCompatibility in axial members
Show answer
Answer: C. Maximum torsional shear stressMaximum torsional shear stress: occurs at the outer surface of a solid circular shaft in elastic torsion.
Report a mistake

Q18. In Strength of Materials, which statement about Maximum torsional shear stress is correct?

  1. Aa member made of two or more materials constrained to deform compatibly
  2. Bvertical deflection is zero at ideal simple supports
  3. Care designed to transfer interface shear so the components act together
  4. Doccurs at the outer surface of a solid circular shaft in elastic torsion
Show answer
Answer: D. occurs at the outer surface of a solid circular shaft in elastic torsionMaximum torsional shear stress: occurs at the outer surface of a solid circular shaft in elastic torsion.
Report a mistake

Q19. Select the correct relationship or description for Maximum torsional shear stress.

  1. Aoccurs at the outer surface of a solid circular shaft in elastic torsion
  2. Bθ = TL/(GJ) in linear elastic torsion
  3. Cq = VQ/I and has units of force per unit length
  4. Dshear stress acting tangentially to the resisting cross section
Show answer
Answer: A. occurs at the outer surface of a solid circular shaft in elastic torsionMaximum torsional shear stress: occurs at the outer surface of a solid circular shaft in elastic torsion.
Report a mistake

Q20. Which option correctly identifies Maximum torsional shear stress?

  1. Aε_th = αΔT when thermal expansion is unrestrained
  2. Boccurs at the outer surface of a solid circular shaft in elastic torsion
  3. Ccauses a jump in the shear-force diagram equal to the load magnitude
  4. Dare commonly represented by σx, σy, and τxy
Show answer
Answer: B. occurs at the outer surface of a solid circular shaft in elastic torsionMaximum torsional shear stress: occurs at the outer surface of a solid circular shaft in elastic torsion.
Report a mistake

Q21. Which statement best describes Angle of twist of a uniform circular shaft?

  1. Aoccurs at the outer surface of a solid circular shaft in elastic torsion
  2. Bτ = q/t
  3. Cθ = TL/(GJ) in linear elastic torsion
  4. Dδ = PL/(AE) for constant axial load and linear elasticity
Show answer
Answer: C. θ = TL/(GJ) in linear elastic torsionAngle of twist of a uniform circular shaft: θ = TL/(GJ) in linear elastic torsion.
Report a mistake

Q22. Which concept is best described by the following statement: “θ = TL/(GJ) in linear elastic torsion”?

  1. APower transmitted by a rotating shaft
  2. BPerfectly bonded composite beam
  3. CFree thermal strain
  4. DAngle of twist of a uniform circular shaft
Show answer
Answer: D. Angle of twist of a uniform circular shaftAngle of twist of a uniform circular shaft: θ = TL/(GJ) in linear elastic torsion.
Report a mistake

Q23. In Strength of Materials, which statement about Angle of twist of a uniform circular shaft is correct?

  1. Aθ = TL/(GJ) in linear elastic torsion
  2. Bnormal stress produced when an axial load pulls a member
  3. Cthe internal moment required for equilibrium of a cut segment
  4. Dis linear with distance from the neutral axis in simple elastic bending
Show answer
Answer: A. θ = TL/(GJ) in linear elastic torsionAngle of twist of a uniform circular shaft: θ = TL/(GJ) in linear elastic torsion.
Report a mistake

Q24. Select the correct relationship or description for Angle of twist of a uniform circular shaft.

  1. Athe resultant normal force obtained from equilibrium of a cut section
  2. Bθ = TL/(GJ) in linear elastic torsion
  3. Ccommonly has a pin support and a roller support
  4. Dlies at (σx + σy)/2 on the normal-stress axis
Show answer
Answer: B. θ = TL/(GJ) in linear elastic torsionAngle of twist of a uniform circular shaft: θ = TL/(GJ) in linear elastic torsion.
Report a mistake

Q25. Which option correctly identifies Angle of twist of a uniform circular shaft?

  1. Athe line in the cross section where longitudinal bending stress is zero
  2. Bcommonly has a pin support and a roller support
  3. Cθ = TL/(GJ) in linear elastic torsion
  4. Dthe algebraic sum of the twists of its individual segments
Show answer
Answer: C. θ = TL/(GJ) in linear elastic torsionAngle of twist of a uniform circular shaft: θ = TL/(GJ) in linear elastic torsion.
Report a mistake

Q26. Which statement best describes Torsional rigidity?

  1. Atangential deviation is related to the first moment of the M/EI area
  2. Bis zero
  3. CS = I/c, where c is the distance to the extreme fiber
  4. Dthe product GJ
Show answer
Answer: D. the product GJTorsional rigidity: the product GJ.
Report a mistake

Q27. Which concept is best described by the following statement: “the product GJ”?

  1. ATorsional rigidity
  2. BRadius of gyration
  3. CSimply supported beam boundary condition
  4. DBuckling
Show answer
Answer: A. Torsional rigidityTorsional rigidity: the product GJ.
Report a mistake

Q28. In Strength of Materials, which statement about Torsional rigidity is correct?

  1. Ais generally nonuniform over the depth of a typical beam cross section
  2. Bthe product GJ
  3. Cangular distortion produced by shear stress
  4. Da geometric property that influences resistance to bending deformation and stress
Show answer
Answer: B. the product GJTorsional rigidity: the product GJ.
Report a mistake

Q29. Select the correct relationship or description for Torsional rigidity.

  1. Aare commonly represented by σx, σy, and τxy
  2. Ba geometric property that influences resistance to bending deformation and stress
  3. Cthe product GJ
  4. Dthe ability of a material to undergo permanent deformation without rupture
Show answer
Answer: C. the product GJTorsional rigidity: the product GJ.
Report a mistake

Q30. Which option correctly identifies Torsional rigidity?

  1. Athe resultant normal force obtained from equilibrium of a cut section
  2. BT/J = τ/r = Gθ/L for a prismatic circular shaft
  3. Cσ = EαΔT in magnitude for a temperature change under ideal full restraint
  4. Dthe product GJ
Show answer
Answer: D. the product GJTorsional rigidity: the product GJ.
Report a mistake

Q31. Which statement best describes Power transmitted by a rotating shaft?

  1. AP = Tω
  2. Barises from internal shear force acting across the cross section
  3. Cthe stress associated with the onset of significant plastic deformation
  4. Dis assembled from multiple components that must transfer longitudinal shear between them
Show answer
Answer: A. P = TωPower transmitted by a rotating shaft: P = Tω.
Report a mistake

Q32. Which concept is best described by the following statement: “P = Tω”?

  1. ATransverse shear in a beam
  2. BPower transmitted by a rotating shaft
  3. CRadius of gyration
  4. DSecond moment of area
Show answer
Answer: B. Power transmitted by a rotating shaftPower transmitted by a rotating shaft: P = Tω.
Report a mistake

Q33. In Strength of Materials, which statement about Power transmitted by a rotating shaft is correct?

  1. Aε_th = αΔT when thermal expansion is unrestrained
  2. Bσ = Eε for a linear elastic material
  3. CP = Tω
  4. Dthe algebraic sum of the twists of its individual segments
Show answer
Answer: C. P = TωPower transmitted by a rotating shaft: P = Tω.
Report a mistake

Q34. Select the correct relationship or description for Power transmitted by a rotating shaft.

  1. Aare orientations at which the in-plane shear stress vanishes
  2. BLe = KL, where K depends on end restraint
  3. Cτ = q/t
  4. DP = Tω
Show answer
Answer: D. P = TωPower transmitted by a rotating shaft: P = Tω.
Report a mistake

Q35. Which option correctly identifies Power transmitted by a rotating shaft?

  1. AP = Tω
  2. Bθ = TL/(GJ) in linear elastic torsion
  3. Cstress is proportional to strain within the proportional limit
  4. Dgeometric deformation conditions used with force-deformation relations
Show answer
Answer: A. P = TωPower transmitted by a rotating shaft: P = Tω.
Report a mistake

Q36. Which statement best describes Angular speed relation?

  1. Aθ = TL/(GJ) in linear elastic torsion
  2. Bω = 2πN/60 when N is in revolutions per minute
  3. Cnormal stress produced when an axial load pulls a member
  4. Dis parabolic over the depth and maximum at the neutral axis
Show answer
Answer: B. ω = 2πN/60 when N is in revolutions per minuteAngular speed relation: ω = 2πN/60 when N is in revolutions per minute.
Report a mistake

Q37. Which concept is best described by the following statement: “ω = 2πN/60 when N is in revolutions per minute”?

  1. AEuler buckling load dependence
  2. BSmall shear strain
  3. CAngular speed relation
  4. DUniaxial Hooke's law
Show answer
Answer: C. Angular speed relationAngular speed relation: ω = 2πN/60 when N is in revolutions per minute.
Report a mistake

Q38. In Strength of Materials, which statement about Angular speed relation is correct?

  1. Awithin the linear elastic range, stress is proportional to strain
  2. Ba member loaded primarily along its longitudinal centroidal axis
  3. Cthe axial compressive load at which an ideal column becomes unstable
  4. Dω = 2πN/60 when N is in revolutions per minute
Show answer
Answer: D. ω = 2πN/60 when N is in revolutions per minuteAngular speed relation: ω = 2πN/60 when N is in revolutions per minute.
Report a mistake

Q39. Select the correct relationship or description for Angular speed relation.

  1. Aω = 2πN/60 when N is in revolutions per minute
  2. Bcommonly has a pin support and a roller support
  3. CLe = KL, where K depends on end restraint
  4. Dis generally nonuniform over the depth of a typical beam cross section
Show answer
Answer: A. ω = 2πN/60 when N is in revolutions per minuteAngular speed relation: ω = 2πN/60 when N is in revolutions per minute.
Report a mistake

Q40. Which option correctly identifies Angular speed relation?

  1. Ais most appropriate for long, slender columns that buckle elastically
  2. Bω = 2πN/60 when N is in revolutions per minute
  3. Cthe line in the cross section where longitudinal bending stress is zero
  4. Dσ = My/I for elastic bending of a prismatic beam under standard assumptions
Show answer
Answer: B. ω = 2πN/60 when N is in revolutions per minuteAngular speed relation: ω = 2πN/60 when N is in revolutions per minute.
Report a mistake

Q41. Which statement best describes Stepped shaft total twist?

  1. Ais the first moment of the relevant partial area about the neutral axis
  2. Bτ = q/t
  3. Cthe algebraic sum of the twists of its individual segments
  4. Dθ = TL/(GJ) in linear elastic torsion
Show answer
Answer: C. the algebraic sum of the twists of its individual segmentsStepped shaft total twist: the algebraic sum of the twists of its individual segments.
Report a mistake

Q42. Which concept is best described by the following statement: “the algebraic sum of the twists of its individual segments”?

  1. APlane stress components
  2. BFirst moment Q in the shear formula
  3. CNormal stress
  4. DStepped shaft total twist
Show answer
Answer: D. Stepped shaft total twistStepped shaft total twist: the algebraic sum of the twists of its individual segments.
Report a mistake

Q43. In Strength of Materials, which statement about Stepped shaft total twist is correct?

  1. Athe algebraic sum of the twists of its individual segments
  2. Bnormal stress produced when an axial load pulls a member
  3. Cis generally nonuniform over the depth of a typical beam cross section
  4. Dthe internal moment required for equilibrium of a cut segment
Show answer
Answer: A. the algebraic sum of the twists of its individual segmentsStepped shaft total twist: the algebraic sum of the twists of its individual segments.
Report a mistake

Q44. Select the correct relationship or description for Stepped shaft total twist.

  1. Aτ = VQ/(It) under standard beam assumptions
  2. Bthe algebraic sum of the twists of its individual segments
  3. Cstress is proportional to strain within the proportional limit
  4. Dthe ability of a material to undergo permanent deformation without rupture
Show answer
Answer: B. the algebraic sum of the twists of its individual segmentsStepped shaft total twist: the algebraic sum of the twists of its individual segments.
Report a mistake

Q45. Which option correctly identifies Stepped shaft total twist?

  1. Acauses a jump in the shear-force diagram equal to the load magnitude
  2. Bwithin the linear elastic range, stress is proportional to strain
  3. Cthe algebraic sum of the twists of its individual segments
  4. DS = I/c, where c is the distance to the extreme fiber
Show answer
Answer: C. the algebraic sum of the twists of its individual segmentsStepped shaft total twist: the algebraic sum of the twists of its individual segments.
Report a mistake

Q46. Which statement best describes Series shaft torque?

  1. Aequals the radius of Mohr's circle for plane stress
  2. Bchange in length divided by original length, ε = ΔL/L
  3. Ccauses a jump in the shear-force diagram equal to the load magnitude
  4. Dis the same through segments between applied torques when no intermediate torque is applied
Show answer
Answer: D. is the same through segments between applied torques when no intermediate torque is appliedSeries shaft torque: is the same through segments between applied torques when no intermediate torque is applied.
Report a mistake

Q47. Which concept is best described by the following statement: “is the same through segments between applied torques when no intermediate torque is applied”?

  1. ASeries shaft torque
  2. BDouble-integration method
  3. CSmall shear strain
  4. DDistributed load
Show answer
Answer: A. Series shaft torqueSeries shaft torque: is the same through segments between applied torques when no intermediate torque is applied.
Report a mistake

Q48. In Strength of Materials, which statement about Series shaft torque is correct?

  1. Ar = sqrt(I/A)
  2. Bis the same through segments between applied torques when no intermediate torque is applied
  3. Cboth deflection and slope are zero at the fixed end
  4. Da stability failure involving lateral deflection of a compressed member
Show answer
Answer: B. is the same through segments between applied torques when no intermediate torque is appliedSeries shaft torque: is the same through segments between applied torques when no intermediate torque is applied.
Report a mistake

Q49. Select the correct relationship or description for Series shaft torque.

  1. Acauses a jump in the bending-moment diagram equal to the couple magnitude
  2. BP = Tω
  3. Cis the same through segments between applied torques when no intermediate torque is applied
  4. Dthe internal transverse force required for equilibrium of a cut segment
Show answer
Answer: C. is the same through segments between applied torques when no intermediate torque is appliedSeries shaft torque: is the same through segments between applied torques when no intermediate torque is applied.
Report a mistake

Q50. Which option correctly identifies Series shaft torque?

  1. Alies at (σx + σy)/2 on the normal-stress axis
  2. Bis proportional to flexural rigidity EI and inversely proportional to effective length squared
  3. Cω = 2πN/60 when N is in revolutions per minute
  4. Dis the same through segments between applied torques when no intermediate torque is applied
Show answer
Answer: D. is the same through segments between applied torques when no intermediate torque is appliedSeries shaft torque: is the same through segments between applied torques when no intermediate torque is applied.
Report a mistake