Civil Engineering · Structural Analysis

Unit 10: Moment Distribution Method MCQs

50 solved multiple choice questions with answers and short explanations.

Q1. Which statement best describes distribution factor?

  1. Ais a member's stiffness at a joint divided by the sum of stiffnesses of members meeting at that joint
  2. Bis always one for every member
  3. Cequals carry-over factor
  4. Ddepends only on load magnitude
Show answer
Answer: A. is a member's stiffness at a joint divided by the sum of stiffnesses of members meeting at that jointIn structural analysis, distribution factor is correctly described as follows: is a member's stiffness at a joint divided by the sum of stiffnesses of members meeting at that joint.
Report a mistake

Q2. Which concept is associated with the statement: “is a member's stiffness at a joint divided by the sum of stiffnesses of members meeting at that joint”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Ddistribution factor
Show answer
Answer: D. distribution factorThe statement describes distribution factor.
Report a mistake

Q3. Which statement best describes sum of distribution factors at a joint?

  1. Aequals zero
  2. Bmust exceed two
  3. Cdepends on applied moment
  4. Dequals one for the participating members under the chosen stiffness model
Show answer
Answer: D. equals one for the participating members under the chosen stiffness modelIn structural analysis, sum of distribution factors at a joint is correctly described as follows: equals one for the participating members under the chosen stiffness model.
Report a mistake

Q4. Which concept is associated with the statement: “equals one for the participating members under the chosen stiffness model”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Csum of distribution factors at a joint
  4. Da quantity unrelated to this topic
Show answer
Answer: C. sum of distribution factors at a jointThe statement describes sum of distribution factors at a joint.
Report a mistake

Q5. Which statement best describes member stiffness for far end fixed?

  1. Ais independent of length
  2. Bis always 2EI/L regardless of far-end condition
  3. Cis commonly proportional to 4EI/L in classical moment distribution
  4. Dis EI only
Show answer
Answer: C. is commonly proportional to 4EI/L in classical moment distributionIn structural analysis, member stiffness for far end fixed is correctly described as follows: is commonly proportional to 4EI/L in classical moment distribution.
Report a mistake

Q6. Which concept is associated with the statement: “is commonly proportional to 4EI/L in classical moment distribution”?

  1. Aa drafting convention only
  2. Bmember stiffness for far end fixed
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. member stiffness for far end fixedThe statement describes member stiffness for far end fixed.
Report a mistake

Q7. Which statement best describes member stiffness for far end hinged?

  1. Ais independent of EI
  2. Bis commonly proportional to 3EI/L at the near end for a prismatic member
  3. Cis 4EI/L in every case
  4. Dis zero
Show answer
Answer: B. is commonly proportional to 3EI/L at the near end for a prismatic memberIn structural analysis, member stiffness for far end hinged is correctly described as follows: is commonly proportional to 3EI/L at the near end for a prismatic member.
Report a mistake

Q8. Which concept is associated with the statement: “is commonly proportional to 3EI/L at the near end for a prismatic member”?

  1. Amember stiffness for far end hinged
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. member stiffness for far end hingedThe statement describes member stiffness for far end hinged.
Report a mistake

Q9. Which statement best describes unbalanced joint moment?

  1. Ais distributed among connected members according to their distribution factors
  2. Bis assigned entirely to the longest member
  3. Cis ignored
  4. Dis divided equally regardless of stiffness
Show answer
Answer: A. is distributed among connected members according to their distribution factorsIn structural analysis, unbalanced joint moment is correctly described as follows: is distributed among connected members according to their distribution factors.
Report a mistake

Q10. Which concept is associated with the statement: “is distributed among connected members according to their distribution factors”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cunbalanced joint moment
  4. Da quantity unrelated to this topic
Show answer
Answer: C. unbalanced joint momentThe statement describes unbalanced joint moment.
Report a mistake

Q11. Which statement best describes carry-over factor?

  1. Ais the ratio of moment induced at the far end to the applied or distributed moment at the near end under specified end conditions
  2. Bis identical to distribution factor
  3. Cis always zero
  4. Dis a force ratio only
Show answer
Answer: A. is the ratio of moment induced at the far end to the applied or distributed moment at the near end under specified end conditionsIn structural analysis, carry-over factor is correctly described as follows: is the ratio of moment induced at the far end to the applied or distributed moment at the near end under specified end conditions.
Report a mistake

Q12. Which concept is associated with the statement: “is the ratio of moment induced at the far end to the applied or distributed moment at the near end under specified end conditions”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dcarry-over factor
Show answer
Answer: D. carry-over factorThe statement describes carry-over factor.
Report a mistake

Q13. Which statement best describes prismatic member with far end fixed?

  1. Ahas a carry-over factor of two
  2. Bhas zero carry-over
  3. Chas a factor independent of boundary condition
  4. Dhas a classical carry-over factor of one-half from near end to far end
Show answer
Answer: D. has a classical carry-over factor of one-half from near end to far endIn structural analysis, prismatic member with far end fixed is correctly described as follows: has a classical carry-over factor of one-half from near end to far end.
Report a mistake

Q14. Which concept is associated with the statement: “has a classical carry-over factor of one-half from near end to far end”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cprismatic member with far end fixed
  4. Da quantity unrelated to this topic
Show answer
Answer: C. prismatic member with far end fixedThe statement describes prismatic member with far end fixed.
Report a mistake

Q15. Which statement best describes far end hinged?

  1. Ahas full carry-over
  2. Bcreates a fixed-end moment
  3. Chas zero moment carry-over to that hinged end in the classical idealization
  4. Dhas one-half carry-over
Show answer
Answer: C. has zero moment carry-over to that hinged end in the classical idealizationIn structural analysis, far end hinged is correctly described as follows: has zero moment carry-over to that hinged end in the classical idealization.
Report a mistake

Q16. Which concept is associated with the statement: “has zero moment carry-over to that hinged end in the classical idealization”?

  1. Aa drafting convention only
  2. Bfar end hinged
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. far end hingedThe statement describes far end hinged.
Report a mistake

Q17. Which statement best describes carry-over operation?

  1. Ais applied only to axial forces
  2. Btransfers a portion of a distributed end moment to the opposite end of the member
  3. Cchanges member length
  4. Dremoves joint equilibrium
Show answer
Answer: B. transfers a portion of a distributed end moment to the opposite end of the memberIn structural analysis, carry-over operation is correctly described as follows: transfers a portion of a distributed end moment to the opposite end of the member.
Report a mistake

Q18. Which concept is associated with the statement: “transfers a portion of a distributed end moment to the opposite end of the member”?

  1. Acarry-over operation
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. carry-over operationThe statement describes carry-over operation.
Report a mistake

Q19. Which statement best describes sign of carried-over moment for a prismatic fixed far end?

  1. Ais the same rotational sense as the near-end moment under the usual moment-distribution convention
  2. Bis always opposite regardless of convention
  3. Chas no sign
  4. Dmust be zero
Show answer
Answer: A. is the same rotational sense as the near-end moment under the usual moment-distribution conventionIn structural analysis, sign of carried-over moment for a prismatic fixed far end is correctly described as follows: is the same rotational sense as the near-end moment under the usual moment-distribution convention.
Report a mistake

Q20. Which concept is associated with the statement: “is the same rotational sense as the near-end moment under the usual moment-distribution convention”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Csign of carried-over moment for a prismatic fixed far end
  4. Da quantity unrelated to this topic
Show answer
Answer: C. sign of carried-over moment for a prismatic fixed far endThe statement describes sign of carried-over moment for a prismatic fixed far end.
Report a mistake

Q21. Which statement best describes starting end moments?

  1. Ainclude fixed-end moments produced by member loads before joint balancing
  2. Bare always zero
  3. Care support reactions only
  4. Ddo not depend on member loading
Show answer
Answer: A. include fixed-end moments produced by member loads before joint balancingIn structural analysis, starting end moments is correctly described as follows: include fixed-end moments produced by member loads before joint balancing.
Report a mistake

Q22. Which concept is associated with the statement: “include fixed-end moments produced by member loads before joint balancing”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dstarting end moments
Show answer
Answer: D. starting end momentsThe statement describes starting end moments.
Report a mistake

Q23. Which statement best describes member load effect?

  1. Ais ignored until the end
  2. Bchanges only distribution factors
  3. Cdoes not affect end moments
  4. Dis represented initially by the appropriate fixed-end moments at restrained member ends
Show answer
Answer: D. is represented initially by the appropriate fixed-end moments at restrained member endsIn structural analysis, member load effect is correctly described as follows: is represented initially by the appropriate fixed-end moments at restrained member ends.
Report a mistake

Q24. Which concept is associated with the statement: “is represented initially by the appropriate fixed-end moments at restrained member ends”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cmember load effect
  4. Da quantity unrelated to this topic
Show answer
Answer: C. member load effectThe statement describes member load effect.
Report a mistake

Q25. Which statement best describes joint release in moment distribution?

  1. Achanges EI
  2. Bsets every moment positive
  3. Crequires balancing the unbalanced joint moment by distributing an opposite balancing moment
  4. Drequires deleting all fixed-end moments
Show answer
Answer: C. requires balancing the unbalanced joint moment by distributing an opposite balancing momentIn structural analysis, joint release in moment distribution is correctly described as follows: requires balancing the unbalanced joint moment by distributing an opposite balancing moment.
Report a mistake

Q26. Which concept is associated with the statement: “requires balancing the unbalanced joint moment by distributing an opposite balancing moment”?

  1. Aa drafting convention only
  2. Bjoint release in moment distribution
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. joint release in moment distributionThe statement describes joint release in moment distribution.
Report a mistake

Q27. Which statement best describes fixed-end moment table?

  1. Acontains no sign convention
  2. Bprovides standard load-case end moments for common prismatic-member loading patterns
  3. Cprovides only support reactions
  4. Dcannot be superposed
Show answer
Answer: B. provides standard load-case end moments for common prismatic-member loading patternsIn structural analysis, fixed-end moment table is correctly described as follows: provides standard load-case end moments for common prismatic-member loading patterns.
Report a mistake

Q28. Which concept is associated with the statement: “provides standard load-case end moments for common prismatic-member loading patterns”?

  1. Afixed-end moment table
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. fixed-end moment tableThe statement describes fixed-end moment table.
Report a mistake

Q29. Which statement best describes superposition of fixed-end moments?

  1. Aallows contributions from multiple member loads to be combined in linear analysis
  2. Bis prohibited in linear elastic analysis
  3. Crequires nonlinear material behavior
  4. Dmakes distribution factors zero
Show answer
Answer: A. allows contributions from multiple member loads to be combined in linear analysisIn structural analysis, superposition of fixed-end moments is correctly described as follows: allows contributions from multiple member loads to be combined in linear analysis.
Report a mistake

Q30. Which concept is associated with the statement: “allows contributions from multiple member loads to be combined in linear analysis”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Csuperposition of fixed-end moments
  4. Da quantity unrelated to this topic
Show answer
Answer: C. superposition of fixed-end momentsThe statement describes superposition of fixed-end moments.
Report a mistake

Q31. Which statement best describes moment distribution for continuous beams?

  1. Aiteratively balances joint moments and carries over moments until the corrections become sufficiently small
  2. Buses only one global moment equation
  3. Ccannot analyze more than one span
  4. Dignores member stiffness
Show answer
Answer: A. iteratively balances joint moments and carries over moments until the corrections become sufficiently smallIn structural analysis, moment distribution for continuous beams is correctly described as follows: iteratively balances joint moments and carries over moments until the corrections become sufficiently small.
Report a mistake

Q32. Which concept is associated with the statement: “iteratively balances joint moments and carries over moments until the corrections become sufficiently small”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dmoment distribution for continuous beams
Show answer
Answer: D. moment distribution for continuous beamsThe statement describes moment distribution for continuous beams.
Report a mistake

Q33. Which statement best describes interior joint?

  1. Abelongs to only one span
  2. Bcannot rotate
  3. Chas no equilibrium requirement
  4. Dreceives moment contributions from each connected span
Show answer
Answer: D. receives moment contributions from each connected spanIn structural analysis, interior joint is correctly described as follows: receives moment contributions from each connected span.
Report a mistake

Q34. Which concept is associated with the statement: “receives moment contributions from each connected span”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cinterior joint
  4. Da quantity unrelated to this topic
Show answer
Answer: C. interior jointThe statement describes interior joint.
Report a mistake

Q35. Which statement best describes balanced joint?

  1. Ahas zero shear
  2. Brequires equal span lengths
  3. Chas zero algebraic unbalanced moment after accounting for applied joint moments under the adopted convention
  4. Dhas all member moments zero
Show answer
Answer: C. has zero algebraic unbalanced moment after accounting for applied joint moments under the adopted conventionIn structural analysis, balanced joint is correctly described as follows: has zero algebraic unbalanced moment after accounting for applied joint moments under the adopted convention.
Report a mistake

Q36. Which concept is associated with the statement: “has zero algebraic unbalanced moment after accounting for applied joint moments under the adopted convention”?

  1. Aa drafting convention only
  2. Bbalanced joint
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. balanced jointThe statement describes balanced joint.
Report a mistake

Q37. Which statement best describes iteration?

  1. Ais used only for determinate beams
  2. Bcontinues because distributing at one joint can create carry-over moments that unbalance neighboring joints
  3. Cis unnecessary after fixed-end moments
  4. Dchanges the beam geometry
Show answer
Answer: B. continues because distributing at one joint can create carry-over moments that unbalance neighboring jointsIn structural analysis, iteration is correctly described as follows: continues because distributing at one joint can create carry-over moments that unbalance neighboring joints.
Report a mistake

Q38. Which concept is associated with the statement: “continues because distributing at one joint can create carry-over moments that unbalance neighboring joints”?

  1. Aiteration
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. iterationThe statement describes iteration.
Report a mistake

Q39. Which statement best describes final member-end moments?

  1. Aare obtained by summing fixed-end moments and all distributed and carried-over corrections
  2. Bequal fixed-end moments only
  3. Cignore carry-over
  4. Dare always zero at interior supports
Show answer
Answer: A. are obtained by summing fixed-end moments and all distributed and carried-over correctionsIn structural analysis, final member-end moments is correctly described as follows: are obtained by summing fixed-end moments and all distributed and carried-over corrections.
Report a mistake

Q40. Which concept is associated with the statement: “are obtained by summing fixed-end moments and all distributed and carried-over corrections”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cfinal member-end moments
  4. Da quantity unrelated to this topic
Show answer
Answer: C. final member-end momentsThe statement describes final member-end moments.
Report a mistake

Q41. Which statement best describes moment distribution for frames?

  1. Auses member stiffness, distribution factors, balancing, and carry-over to obtain member end moments
  2. Bis applicable only to trusses
  3. Crequires no joint equilibrium
  4. Duses axial force only
Show answer
Answer: A. uses member stiffness, distribution factors, balancing, and carry-over to obtain member end momentsIn structural analysis, moment distribution for frames is correctly described as follows: uses member stiffness, distribution factors, balancing, and carry-over to obtain member end moments.
Report a mistake

Q42. Which concept is associated with the statement: “uses member stiffness, distribution factors, balancing, and carry-over to obtain member end moments”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dmoment distribution for frames
Show answer
Answer: D. moment distribution for framesThe statement describes moment distribution for frames.
Report a mistake

Q43. Which statement best describes non-sway frame distribution?

  1. Arequires a sidesway correction in every case
  2. Bsets all joint rotations zero
  3. Ccannot include fixed-end moments
  4. Dcan be performed with lateral translation restrained in the analysis
Show answer
Answer: D. can be performed with lateral translation restrained in the analysisIn structural analysis, non-sway frame distribution is correctly described as follows: can be performed with lateral translation restrained in the analysis.
Report a mistake

Q44. Which concept is associated with the statement: “can be performed with lateral translation restrained in the analysis”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cnon-sway frame distribution
  4. Da quantity unrelated to this topic
Show answer
Answer: C. non-sway frame distributionThe statement describes non-sway frame distribution.
Report a mistake

Q45. Which statement best describes sway frame moment distribution?

  1. Aignores column moments
  2. Bcannot be performed
  3. Crequires accounting for lateral translation in addition to joint rotation effects
  4. Dis identical to a no-sway analysis without modification
Show answer
Answer: C. requires accounting for lateral translation in addition to joint rotation effectsIn structural analysis, sway frame moment distribution is correctly described as follows: requires accounting for lateral translation in addition to joint rotation effects.
Report a mistake

Q46. Which concept is associated with the statement: “requires accounting for lateral translation in addition to joint rotation effects”?

  1. Aa drafting convention only
  2. Bsway frame moment distribution
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. sway frame moment distributionThe statement describes sway frame moment distribution.
Report a mistake

Q47. Which statement best describes joint stiffness?

  1. Ais identical for all members
  2. Bcontrols how an unbalanced moment is apportioned among connected frame members
  3. Chas no effect on distribution
  4. Ddepends only on applied load
Show answer
Answer: B. controls how an unbalanced moment is apportioned among connected frame membersIn structural analysis, joint stiffness is correctly described as follows: controls how an unbalanced moment is apportioned among connected frame members.
Report a mistake

Q48. Which concept is associated with the statement: “controls how an unbalanced moment is apportioned among connected frame members”?

  1. Ajoint stiffness
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. joint stiffnessThe statement describes joint stiffness.
Report a mistake

Q49. Which statement best describes final frame moments?

  1. Amust satisfy joint moment equilibrium and be consistent with the assumed sway condition
  2. Bneed not balance at joints
  3. Care independent of boundary conditions
  4. Dare determined only by member length
Show answer
Answer: A. must satisfy joint moment equilibrium and be consistent with the assumed sway conditionIn structural analysis, final frame moments is correctly described as follows: must satisfy joint moment equilibrium and be consistent with the assumed sway condition.
Report a mistake

Q50. Which concept is associated with the statement: “must satisfy joint moment equilibrium and be consistent with the assumed sway condition”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cfinal frame moments
  4. Da quantity unrelated to this topic
Show answer
Answer: C. final frame momentsThe statement describes final frame moments.
Report a mistake