Civil Engineering · Structural Analysis

Unit 5: Influence Lines MCQs

50 solved multiple choice questions with answers and short explanations.

Q1. Which statement best describes influence line?

  1. Ashows how a response quantity at a specified location varies as a unit load moves across the structure
  2. Bshows deflection shape under one fixed load only
  3. Cis the same as a bending-moment diagram for fixed loading
  4. Dcontains only material properties
Show answer
Answer: A. shows how a response quantity at a specified location varies as a unit load moves across the structureIn structural analysis, influence line is correctly described as follows: shows how a response quantity at a specified location varies as a unit load moves across the structure.
Report a mistake

Q2. Which concept is associated with the statement: “shows how a response quantity at a specified location varies as a unit load moves across the structure”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dinfluence line
Show answer
Answer: D. influence lineThe statement describes influence line.
Report a mistake

Q3. Which statement best describes ordinate of an influence line?

  1. Ais always a physical displacement
  2. Bis always positive
  3. Cdoes not depend on load position
  4. Drepresents the value of the chosen response due to a unit load at that load position
Show answer
Answer: D. represents the value of the chosen response due to a unit load at that load positionIn structural analysis, ordinate of an influence line is correctly described as follows: represents the value of the chosen response due to a unit load at that load position.
Report a mistake

Q4. Which concept is associated with the statement: “represents the value of the chosen response due to a unit load at that load position”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cordinate of an influence line
  4. Da quantity unrelated to this topic
Show answer
Answer: C. ordinate of an influence lineThe statement describes ordinate of an influence line.
Report a mistake

Q5. Which statement best describes determinate influence line?

  1. Acannot include reactions
  2. Bis independent of support conditions
  3. Ccan often be constructed from equilibrium as the unit load moves
  4. Drequires nonlinear analysis
Show answer
Answer: C. can often be constructed from equilibrium as the unit load movesIn structural analysis, determinate influence line is correctly described as follows: can often be constructed from equilibrium as the unit load moves.
Report a mistake

Q6. Which concept is associated with the statement: “can often be constructed from equilibrium as the unit load moves”?

  1. Aa drafting convention only
  2. Bdeterminate influence line
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. determinate influence lineThe statement describes determinate influence line.
Report a mistake

Q7. Which statement best describes Müller-Breslau principle?

  1. Aapplies only to trusses
  2. Brelates an influence-line shape to the deflected form after releasing the corresponding restraint and imposing a unit displacement
  3. Cis used only to calculate material strength
  4. Dstates all influence lines are straight
Show answer
Answer: B. relates an influence-line shape to the deflected form after releasing the corresponding restraint and imposing a unit displacementIn structural analysis, Müller-Breslau principle is correctly described as follows: relates an influence-line shape to the deflected form after releasing the corresponding restraint and imposing a unit displacement.
Report a mistake

Q8. Which concept is associated with the statement: “relates an influence-line shape to the deflected form after releasing the corresponding restraint and imposing a unit displacement”?

  1. AMüller-Breslau principle
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. Müller-Breslau principleThe statement describes Müller-Breslau principle.
Report a mistake

Q9. Which statement best describes moving-load analysis?

  1. Auses influence lines to locate loads for critical response effects
  2. Brequires loads to remain fixed
  3. Ccannot evaluate reactions
  4. Dignores load position
Show answer
Answer: A. uses influence lines to locate loads for critical response effectsIn structural analysis, moving-load analysis is correctly described as follows: uses influence lines to locate loads for critical response effects.
Report a mistake

Q10. Which concept is associated with the statement: “uses influence lines to locate loads for critical response effects”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cmoving-load analysis
  4. Da quantity unrelated to this topic
Show answer
Answer: C. moving-load analysisThe statement describes moving-load analysis.
Report a mistake

Q11. Which statement best describes reaction influence line?

  1. Agives a support reaction as a unit load moves across the structure
  2. Bgives only beam curvature
  3. Cis always zero at supports
  4. Dcannot be used for moving loads
Show answer
Answer: A. gives a support reaction as a unit load moves across the structureIn structural analysis, reaction influence line is correctly described as follows: gives a support reaction as a unit load moves across the structure.
Report a mistake

Q12. Which concept is associated with the statement: “gives a support reaction as a unit load moves across the structure”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dreaction influence line
Show answer
Answer: D. reaction influence lineThe statement describes reaction influence line.
Report a mistake

Q13. Which statement best describes simply supported beam left reaction?

  1. Ais constant at one everywhere
  2. Bincreases quadratically
  3. Cis zero everywhere
  4. Ddecreases linearly from one at the left support to zero at the right support for a downward unit load
Show answer
Answer: D. decreases linearly from one at the left support to zero at the right support for a downward unit loadIn structural analysis, simply supported beam left reaction is correctly described as follows: decreases linearly from one at the left support to zero at the right support for a downward unit load.
Report a mistake

Q14. Which concept is associated with the statement: “decreases linearly from one at the left support to zero at the right support for a downward unit load”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Csimply supported beam left reaction
  4. Da quantity unrelated to this topic
Show answer
Answer: C. simply supported beam left reactionThe statement describes simply supported beam left reaction.
Report a mistake

Q15. Which statement best describes simply supported beam right reaction?

  1. Adecreases from one to zero
  2. Bis always negative
  3. Cincreases linearly from zero at the left support to one at the right support
  4. Dis constant at zero
Show answer
Answer: C. increases linearly from zero at the left support to one at the right supportIn structural analysis, simply supported beam right reaction is correctly described as follows: increases linearly from zero at the left support to one at the right support.
Report a mistake

Q16. Which concept is associated with the statement: “increases linearly from zero at the left support to one at the right support”?

  1. Aa drafting convention only
  2. Bsimply supported beam right reaction
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. simply supported beam right reactionThe statement describes simply supported beam right reaction.
Report a mistake

Q17. Which statement best describes maximum reaction from moving point loads?

  1. Acannot be evaluated from an influence line
  2. Bis found by placing loads where favorable influence ordinates are largest
  3. Cis independent of load positions
  4. Drequires all loads at zero ordinates
Show answer
Answer: B. is found by placing loads where favorable influence ordinates are largestIn structural analysis, maximum reaction from moving point loads is correctly described as follows: is found by placing loads where favorable influence ordinates are largest.
Report a mistake

Q18. Which concept is associated with the statement: “is found by placing loads where favorable influence ordinates are largest”?

  1. Amaximum reaction from moving point loads
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. maximum reaction from moving point loadsThe statement describes maximum reaction from moving point loads.
Report a mistake

Q19. Which statement best describes reaction IL ordinate sign?

  1. Aindicates whether a unit load at that position produces positive or negative reaction according to the chosen convention
  2. Bhas no physical meaning
  3. Cmust always be positive
  4. Dequals member stiffness
Show answer
Answer: A. indicates whether a unit load at that position produces positive or negative reaction according to the chosen conventionIn structural analysis, reaction IL ordinate sign is correctly described as follows: indicates whether a unit load at that position produces positive or negative reaction according to the chosen convention.
Report a mistake

Q20. Which concept is associated with the statement: “indicates whether a unit load at that position produces positive or negative reaction according to the chosen convention”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Creaction IL ordinate sign
  4. Da quantity unrelated to this topic
Show answer
Answer: C. reaction IL ordinate signThe statement describes reaction IL ordinate sign.
Report a mistake

Q21. Which statement best describes shear influence line at a section?

  1. Ahas a discontinuity at the section for a statically determinate beam
  2. Bmust be smooth everywhere
  3. Cis identical to the reaction influence line
  4. Dis always zero
Show answer
Answer: A. has a discontinuity at the section for a statically determinate beamIn structural analysis, shear influence line at a section is correctly described as follows: has a discontinuity at the section for a statically determinate beam.
Report a mistake

Q22. Which concept is associated with the statement: “has a discontinuity at the section for a statically determinate beam”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dshear influence line at a section
Show answer
Answer: D. shear influence line at a sectionThe statement describes shear influence line at a section.
Report a mistake

Q23. Which statement best describes unit load just left versus just right of a shear section?

  1. Amust give identical ordinates
  2. Bcannot affect shear
  3. Cchanges only material stiffness
  4. Dproduces influence ordinates separated by the characteristic shear jump
Show answer
Answer: D. produces influence ordinates separated by the characteristic shear jumpIn structural analysis, unit load just left versus just right of a shear section is correctly described as follows: produces influence ordinates separated by the characteristic shear jump.
Report a mistake

Q24. Which concept is associated with the statement: “produces influence ordinates separated by the characteristic shear jump”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cunit load just left versus just right of a shear section
  4. Da quantity unrelated to this topic
Show answer
Answer: C. unit load just left versus just right of a shear sectionThe statement describes unit load just left versus just right of a shear section.
Report a mistake

Q25. Which statement best describes maximum positive shear?

  1. Ais unrelated to the influence line
  2. Brequires negative ordinates only
  3. Cis obtained by positioning moving loads over favorable positive influence ordinates
  4. Dalways occurs with all loads off the span
Show answer
Answer: C. is obtained by positioning moving loads over favorable positive influence ordinatesIn structural analysis, maximum positive shear is correctly described as follows: is obtained by positioning moving loads over favorable positive influence ordinates.
Report a mistake

Q26. Which concept is associated with the statement: “is obtained by positioning moving loads over favorable positive influence ordinates”?

  1. Aa drafting convention only
  2. Bmaximum positive shear
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. maximum positive shearThe statement describes maximum positive shear.
Report a mistake

Q27. Which statement best describes maximum negative shear?

  1. Adepends only on elastic modulus
  2. Bis obtained by using the negative region of the shear influence line appropriately
  3. Ccannot occur in beams
  4. Dis always equal to positive shear
Show answer
Answer: B. is obtained by using the negative region of the shear influence line appropriatelyIn structural analysis, maximum negative shear is correctly described as follows: is obtained by using the negative region of the shear influence line appropriately.
Report a mistake

Q28. Which concept is associated with the statement: “is obtained by using the negative region of the shear influence line appropriately”?

  1. Amaximum negative shear
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. maximum negative shearThe statement describes maximum negative shear.
Report a mistake

Q29. Which statement best describes shear IL use?

  1. Aallows efficient evaluation of section shear under moving concentrated loads
  2. Bdirectly gives stress without section properties
  3. Creplaces all equilibrium calculations
  4. Dapplies only to fixed loads
Show answer
Answer: A. allows efficient evaluation of section shear under moving concentrated loadsIn structural analysis, shear IL use is correctly described as follows: allows efficient evaluation of section shear under moving concentrated loads.
Report a mistake

Q30. Which concept is associated with the statement: “allows efficient evaluation of section shear under moving concentrated loads”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cshear IL use
  4. Da quantity unrelated to this topic
Show answer
Answer: C. shear IL useThe statement describes shear IL use.
Report a mistake

Q31. Which statement best describes moment influence line at a section?

  1. Ashows section bending moment caused by a moving unit load
  2. Bshows only support settlement
  3. Cis always discontinuous at the section
  4. Dcannot have zero ordinates
Show answer
Answer: A. shows section bending moment caused by a moving unit loadIn structural analysis, moment influence line at a section is correctly described as follows: shows section bending moment caused by a moving unit load.
Report a mistake

Q32. Which concept is associated with the statement: “shows section bending moment caused by a moving unit load”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dmoment influence line at a section
Show answer
Answer: D. moment influence line at a sectionThe statement describes moment influence line at a section.
Report a mistake

Q33. Which statement best describes simply supported beam moment IL?

  1. Ais one at both supports
  2. Bis constant across the span
  3. Cis unrelated to section location
  4. Dis zero at both simple supports for an interior section
Show answer
Answer: D. is zero at both simple supports for an interior sectionIn structural analysis, simply supported beam moment IL is correctly described as follows: is zero at both simple supports for an interior section.
Report a mistake

Q34. Which concept is associated with the statement: “is zero at both simple supports for an interior section”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Csimply supported beam moment IL
  4. Da quantity unrelated to this topic
Show answer
Answer: C. simply supported beam moment ILThe statement describes simply supported beam moment IL.
Report a mistake

Q35. Which statement best describes maximum positive section moment?

  1. Ais independent of load placement
  2. Balways occurs at a support
  3. Cis promoted by placing moving loads on positive influence ordinates
  4. Drequires loads on zero ordinates only
Show answer
Answer: C. is promoted by placing moving loads on positive influence ordinatesIn structural analysis, maximum positive section moment is correctly described as follows: is promoted by placing moving loads on positive influence ordinates.
Report a mistake

Q36. Which concept is associated with the statement: “is promoted by placing moving loads on positive influence ordinates”?

  1. Aa drafting convention only
  2. Bmaximum positive section moment
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. maximum positive section momentThe statement describes maximum positive section moment.
Report a mistake

Q37. Which statement best describes moment IL ordinate units for a unit force?

  1. Ahave dimensions of stiffness
  2. Bhave dimensions of length when the response is bending moment
  3. Care always dimensionless
  4. Dhave dimensions of stress
Show answer
Answer: B. have dimensions of length when the response is bending momentIn structural analysis, moment IL ordinate units for a unit force is correctly described as follows: have dimensions of length when the response is bending moment.
Report a mistake

Q38. Which concept is associated with the statement: “have dimensions of length when the response is bending moment”?

  1. Amoment IL ordinate units for a unit force
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. moment IL ordinate units for a unit forceThe statement describes moment IL ordinate units for a unit force.
Report a mistake

Q39. Which statement best describes moment influence line purpose?

  1. Aidentifies load positions that maximize or minimize moment at a chosen section
  2. Bgives the full BMD for one fixed load directly
  3. Cdetermines material yield strength
  4. Dcannot handle multiple moving loads
Show answer
Answer: A. identifies load positions that maximize or minimize moment at a chosen sectionIn structural analysis, moment influence line purpose is correctly described as follows: identifies load positions that maximize or minimize moment at a chosen section.
Report a mistake

Q40. Which concept is associated with the statement: “identifies load positions that maximize or minimize moment at a chosen section”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cmoment influence line purpose
  4. Da quantity unrelated to this topic
Show answer
Answer: C. moment influence line purposeThe statement describes moment influence line purpose.
Report a mistake

Q41. Which statement best describes moving load?

  1. Achanges position on the structure and therefore changes structural response
  2. Bhas fixed position by definition
  3. Ccannot be represented by point loads
  4. Ddoes not affect reactions
Show answer
Answer: A. changes position on the structure and therefore changes structural responseIn structural analysis, moving load is correctly described as follows: changes position on the structure and therefore changes structural response.
Report a mistake

Q42. Which concept is associated with the statement: “changes position on the structure and therefore changes structural response”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dmoving load
Show answer
Answer: D. moving loadThe statement describes moving load.
Report a mistake

Q43. Which statement best describes load train?

  1. Ais a distributed dead load only
  2. Bcontains no axle spacing information
  3. Ccannot cross a bridge
  4. Dis a set of moving concentrated loads with specified spacings
Show answer
Answer: D. is a set of moving concentrated loads with specified spacingsIn structural analysis, load train is correctly described as follows: is a set of moving concentrated loads with specified spacings.
Report a mistake

Q44. Which concept is associated with the statement: “is a set of moving concentrated loads with specified spacings”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cload train
  4. Da quantity unrelated to this topic
Show answer
Answer: C. load trainThe statement describes load train.
Report a mistake

Q45. Which statement best describes critical load placement?

  1. Anever depends on span
  2. Brequires loads at zero ordinates
  3. Cdepends on the influence line for the response being optimized
  4. Dis the same for every response quantity
Show answer
Answer: C. depends on the influence line for the response being optimizedIn structural analysis, critical load placement is correctly described as follows: depends on the influence line for the response being optimized.
Report a mistake

Q46. Which concept is associated with the statement: “depends on the influence line for the response being optimized”?

  1. Aa drafting convention only
  2. Bcritical load placement
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. critical load placementThe statement describes critical load placement.
Report a mistake

Q47. Which statement best describes response to several moving point loads?

  1. Acannot be superposed
  2. Bis the sum of each load multiplied by the corresponding influence ordinate in linear analysis
  3. Cequals the largest load only
  4. Dignores load spacing
Show answer
Answer: B. is the sum of each load multiplied by the corresponding influence ordinate in linear analysisIn structural analysis, response to several moving point loads is correctly described as follows: is the sum of each load multiplied by the corresponding influence ordinate in linear analysis.
Report a mistake

Q48. Which concept is associated with the statement: “is the sum of each load multiplied by the corresponding influence ordinate in linear analysis”?

  1. Aresponse to several moving point loads
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. response to several moving point loadsThe statement describes response to several moving point loads.
Report a mistake

Q49. Which statement best describes uniform moving load effect?

  1. Ais obtained from load intensity multiplied by the relevant influence-line area over the loaded region
  2. Bdepends only on the peak ordinate
  3. Cis always zero
  4. Dcannot be treated with influence lines
Show answer
Answer: A. is obtained from load intensity multiplied by the relevant influence-line area over the loaded regionIn structural analysis, uniform moving load effect is correctly described as follows: is obtained from load intensity multiplied by the relevant influence-line area over the loaded region.
Report a mistake

Q50. Which concept is associated with the statement: “is obtained from load intensity multiplied by the relevant influence-line area over the loaded region”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cuniform moving load effect
  4. Da quantity unrelated to this topic
Show answer
Answer: C. uniform moving load effectThe statement describes uniform moving load effect.
Report a mistake