Civil Engineering · Structural Analysis

Unit 6: Structural Deflections MCQs

50 solved multiple choice questions with answers and short explanations.

Q1. Which statement best describes elastic curve?

  1. Ais the deflected shape of a beam's longitudinal axis
  2. Bis the shear-force diagram
  3. Cis the undeformed neutral axis only
  4. Dis a load diagram
Show answer
Answer: A. is the deflected shape of a beam's longitudinal axisIn structural analysis, elastic curve is correctly described as follows: is the deflected shape of a beam's longitudinal axis.
Report a mistake

Q2. Which concept is associated with the statement: “is the deflected shape of a beam's longitudinal axis”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Delastic curve
Show answer
Answer: D. elastic curveThe statement describes elastic curve.
Report a mistake

Q3. Which statement best describes small-slope beam theory?

  1. Astates curvature is always zero
  2. Bequates deflection directly to shear
  3. Cdoes not use flexural rigidity
  4. Drelates curvature approximately to the second derivative of transverse deflection
Show answer
Answer: D. relates curvature approximately to the second derivative of transverse deflectionIn structural analysis, small-slope beam theory is correctly described as follows: relates curvature approximately to the second derivative of transverse deflection.
Report a mistake

Q4. Which concept is associated with the statement: “relates curvature approximately to the second derivative of transverse deflection”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Csmall-slope beam theory
  4. Da quantity unrelated to this topic
Show answer
Answer: C. small-slope beam theoryThe statement describes small-slope beam theory.
Report a mistake

Q5. Which statement best describes flexural rigidity?

  1. Aequals load times span
  2. Bhas no effect on deflection
  3. Cis the product EI
  4. Dis the product EA only
Show answer
Answer: C. is the product EIIn structural analysis, flexural rigidity is correctly described as follows: is the product EI.
Report a mistake

Q6. Which concept is associated with the statement: “is the product EI”?

  1. Aa drafting convention only
  2. Bflexural rigidity
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. flexural rigidityThe statement describes flexural rigidity.
Report a mistake

Q7. Which statement best describes greater EI?

  1. Aeliminates reactions
  2. Bgenerally reduces bending deflection for the same loading and boundary conditions
  3. Calways increases deflection
  4. Dhas no influence on curvature
Show answer
Answer: B. generally reduces bending deflection for the same loading and boundary conditionsIn structural analysis, greater EI is correctly described as follows: generally reduces bending deflection for the same loading and boundary conditions.
Report a mistake

Q8. Which concept is associated with the statement: “generally reduces bending deflection for the same loading and boundary conditions”?

  1. Agreater EI
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. greater EIThe statement describes greater EI.
Report a mistake

Q9. Which statement best describes boundary conditions?

  1. Aare needed to determine integration constants in deflection analysis
  2. Bare unnecessary after integrating
  3. Cdepend only on load magnitude
  4. Dalways set both slope and deflection to zero everywhere
Show answer
Answer: A. are needed to determine integration constants in deflection analysisIn structural analysis, boundary conditions is correctly described as follows: are needed to determine integration constants in deflection analysis.
Report a mistake

Q10. Which concept is associated with the statement: “are needed to determine integration constants in deflection analysis”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cboundary conditions
  4. Da quantity unrelated to this topic
Show answer
Answer: C. boundary conditionsThe statement describes boundary conditions.
Report a mistake

Q11. Which statement best describes double integration method?

  1. Aintegrates the moment-curvature relation to obtain slope and deflection
  2. Bdifferentiates support reactions twice
  3. Cuses no boundary conditions
  4. Dapplies only to trusses
Show answer
Answer: A. integrates the moment-curvature relation to obtain slope and deflectionIn structural analysis, double integration method is correctly described as follows: integrates the moment-curvature relation to obtain slope and deflection.
Report a mistake

Q12. Which concept is associated with the statement: “integrates the moment-curvature relation to obtain slope and deflection”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Ddouble integration method
Show answer
Answer: D. double integration methodThe statement describes double integration method.
Report a mistake

Q13. Which statement best describes basic relation?

  1. AEI equals shear force
  2. Bdeflection equals axial force
  3. Cmoment is independent of curvature
  4. DEI times the second derivative of deflection is related to bending moment under the adopted sign convention
Show answer
Answer: D. EI times the second derivative of deflection is related to bending moment under the adopted sign conventionIn structural analysis, basic relation is correctly described as follows: EI times the second derivative of deflection is related to bending moment under the adopted sign convention.
Report a mistake

Q14. Which concept is associated with the statement: “EI times the second derivative of deflection is related to bending moment under the adopted sign convention”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cbasic relation
  4. Da quantity unrelated to this topic
Show answer
Answer: C. basic relationThe statement describes basic relation.
Report a mistake

Q15. Which statement best describes first integration?

  1. Aeliminates integration constants
  2. Bgives support reaction only
  3. Cproduces an expression related to slope
  4. Ddirectly produces stress
Show answer
Answer: C. produces an expression related to slopeIn structural analysis, first integration is correctly described as follows: produces an expression related to slope.
Report a mistake

Q16. Which concept is associated with the statement: “produces an expression related to slope”?

  1. Aa drafting convention only
  2. Bfirst integration
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. first integrationThe statement describes first integration.
Report a mistake

Q17. Which statement best describes second integration?

  1. Aremoves need for boundary conditions
  2. Bproduces an expression for transverse deflection
  3. Cproduces load intensity
  4. Dgives axial strain only
Show answer
Answer: B. produces an expression for transverse deflectionIn structural analysis, second integration is correctly described as follows: produces an expression for transverse deflection.
Report a mistake

Q18. Which concept is associated with the statement: “produces an expression for transverse deflection”?

  1. Asecond integration
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. second integrationThe statement describes second integration.
Report a mistake

Q19. Which statement best describes integration constants?

  1. Aare evaluated using known support or continuity conditions
  2. Bare always zero
  3. Care chosen arbitrarily
  4. Ddepend only on material density
Show answer
Answer: A. are evaluated using known support or continuity conditionsIn structural analysis, integration constants is correctly described as follows: are evaluated using known support or continuity conditions.
Report a mistake

Q20. Which concept is associated with the statement: “are evaluated using known support or continuity conditions”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cintegration constants
  4. Da quantity unrelated to this topic
Show answer
Answer: C. integration constantsThe statement describes integration constants.
Report a mistake

Q21. Which statement best describes first moment-area theorem?

  1. Achange in slope between two points equals the area under the M/EI diagram between them
  2. Bdeflection equals total load
  3. Cshear equals M/EI area
  4. Dslope is always zero
Show answer
Answer: A. change in slope between two points equals the area under the M/EI diagram between themIn structural analysis, first moment-area theorem is correctly described as follows: change in slope between two points equals the area under the M/EI diagram between them.
Report a mistake

Q22. Which concept is associated with the statement: “change in slope between two points equals the area under the M/EI diagram between them”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dfirst moment-area theorem
Show answer
Answer: D. first moment-area theoremThe statement describes first moment-area theorem.
Report a mistake

Q23. Which statement best describes second moment-area theorem?

  1. Amoment equals deflection directly
  2. Breaction equals M/EI area
  3. Ccurvature is ignored
  4. Dtangential deviation is related to the first moment of the M/EI area
Show answer
Answer: D. tangential deviation is related to the first moment of the M/EI areaIn structural analysis, second moment-area theorem is correctly described as follows: tangential deviation is related to the first moment of the M/EI area.
Report a mistake

Q24. Which concept is associated with the statement: “tangential deviation is related to the first moment of the M/EI area”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Csecond moment-area theorem
  4. Da quantity unrelated to this topic
Show answer
Answer: C. second moment-area theoremThe statement describes second moment-area theorem.
Report a mistake

Q25. Which statement best describes M/EI diagram?

  1. Acontains only shear force
  2. Bis independent of stiffness
  3. Ccombines bending moment with flexural rigidity for deflection calculations
  4. Dis identical to the load diagram
Show answer
Answer: C. combines bending moment with flexural rigidity for deflection calculationsIn structural analysis, M/EI diagram is correctly described as follows: combines bending moment with flexural rigidity for deflection calculations.
Report a mistake

Q26. Which concept is associated with the statement: “combines bending moment with flexural rigidity for deflection calculations”?

  1. Aa drafting convention only
  2. BM/EI diagram
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. M/EI diagramThe statement describes M/EI diagram.
Report a mistake

Q27. Which statement best describes constant EI assumption?

  1. Ais required for all structural analysis
  2. Ballows the moment diagram to be scaled uniformly to form M/EI
  3. Cmakes bending moment zero
  4. Dprevents deflection
Show answer
Answer: B. allows the moment diagram to be scaled uniformly to form M/EIIn structural analysis, constant EI assumption is correctly described as follows: allows the moment diagram to be scaled uniformly to form M/EI.
Report a mistake

Q28. Which concept is associated with the statement: “allows the moment diagram to be scaled uniformly to form M/EI”?

  1. Aconstant EI assumption
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. constant EI assumptionThe statement describes constant EI assumption.
Report a mistake

Q29. Which statement best describes moment-area usefulness?

  1. Aefficiently determines selected slopes and deflections without deriving a full deflection equation
  2. Bcannot determine slope
  3. Cworks only for axial members
  4. Ddoes not use bending moment
Show answer
Answer: A. efficiently determines selected slopes and deflections without deriving a full deflection equationIn structural analysis, moment-area usefulness is correctly described as follows: efficiently determines selected slopes and deflections without deriving a full deflection equation.
Report a mistake

Q30. Which concept is associated with the statement: “efficiently determines selected slopes and deflections without deriving a full deflection equation”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cmoment-area usefulness
  4. Da quantity unrelated to this topic
Show answer
Answer: C. moment-area usefulnessThe statement describes moment-area usefulness.
Report a mistake

Q31. Which statement best describes conjugate beam loading?

  1. Ais the real beam's M/EI diagram
  2. Bis the original external loading unchanged
  3. Cis the shear diagram
  4. Dis the axial-force diagram
Show answer
Answer: A. is the real beam's M/EI diagramIn structural analysis, conjugate beam loading is correctly described as follows: is the real beam's M/EI diagram.
Report a mistake

Q32. Which concept is associated with the statement: “is the real beam's M/EI diagram”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dconjugate beam loading
Show answer
Answer: D. conjugate beam loadingThe statement describes conjugate beam loading.
Report a mistake

Q33. Which statement best describes conjugate beam shear?

  1. Acorresponds to axial force only
  2. Bequals real-beam load
  3. Chas no relation to deformation
  4. Dcorresponds to slope in the real beam
Show answer
Answer: D. corresponds to slope in the real beamIn structural analysis, conjugate beam shear is correctly described as follows: corresponds to slope in the real beam.
Report a mistake

Q34. Which concept is associated with the statement: “corresponds to slope in the real beam”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cconjugate beam shear
  4. Da quantity unrelated to this topic
Show answer
Answer: C. conjugate beam shearThe statement describes conjugate beam shear.
Report a mistake

Q35. Which statement best describes conjugate beam moment?

  1. Ais always zero
  2. Bequals material stress
  3. Ccorresponds to deflection in the real beam
  4. Dcorresponds to real-beam shear
Show answer
Answer: C. corresponds to deflection in the real beamIn structural analysis, conjugate beam moment is correctly described as follows: corresponds to deflection in the real beam.
Report a mistake

Q36. Which concept is associated with the statement: “corresponds to deflection in the real beam”?

  1. Aa drafting convention only
  2. Bconjugate beam moment
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. conjugate beam momentThe statement describes conjugate beam moment.
Report a mistake

Q37. Which statement best describes real fixed end in conjugate-beam transformation?

  1. Ais removed without replacement
  2. Bcorresponds to a free end in the conjugate beam
  3. Cremains fixed in every formulation
  4. Dbecomes a pin only
Show answer
Answer: B. corresponds to a free end in the conjugate beamIn structural analysis, real fixed end in conjugate-beam transformation is correctly described as follows: corresponds to a free end in the conjugate beam.
Report a mistake

Q38. Which concept is associated with the statement: “corresponds to a free end in the conjugate beam”?

  1. Areal fixed end in conjugate-beam transformation
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. real fixed end in conjugate-beam transformationThe statement describes real fixed end in conjugate-beam transformation.
Report a mistake

Q39. Which statement best describes real free end in conjugate-beam transformation?

  1. Acorresponds to a fixed end in the conjugate beam
  2. Bremains free
  3. Cbecomes a roller only
  4. Dcannot be transformed
Show answer
Answer: A. corresponds to a fixed end in the conjugate beamIn structural analysis, real free end in conjugate-beam transformation is correctly described as follows: corresponds to a fixed end in the conjugate beam.
Report a mistake

Q40. Which concept is associated with the statement: “corresponds to a fixed end in the conjugate beam”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Creal free end in conjugate-beam transformation
  4. Da quantity unrelated to this topic
Show answer
Answer: C. real free end in conjugate-beam transformationThe statement describes real free end in conjugate-beam transformation.
Report a mistake

Q41. Which statement best describes truss deflection?

  1. Ais primarily associated with axial deformation of members in the ideal truss model
  2. Bcomes only from member bending
  3. Cis independent of member area
  4. Dcannot be calculated
Show answer
Answer: A. is primarily associated with axial deformation of members in the ideal truss modelIn structural analysis, truss deflection is correctly described as follows: is primarily associated with axial deformation of members in the ideal truss model.
Report a mistake

Q42. Which concept is associated with the statement: “is primarily associated with axial deformation of members in the ideal truss model”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dtruss deflection
Show answer
Answer: D. truss deflectionThe statement describes truss deflection.
Report a mistake

Q43. Which statement best describes member axial deformation?

  1. Ais PL/EI
  2. Bis ML/AE
  3. Cdoes not depend on length
  4. Dis PL/AE for a prismatic linearly elastic member under constant axial force
Show answer
Answer: D. is PL/AE for a prismatic linearly elastic member under constant axial forceIn structural analysis, member axial deformation is correctly described as follows: is PL/AE for a prismatic linearly elastic member under constant axial force.
Report a mistake

Q44. Which concept is associated with the statement: “is PL/AE for a prismatic linearly elastic member under constant axial force”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cmember axial deformation
  4. Da quantity unrelated to this topic
Show answer
Answer: C. member axial deformationThe statement describes member axial deformation.
Report a mistake

Q45. Which statement best describes unit-load method for trusses?

  1. Arequires no virtual system
  2. Bcannot calculate joint displacement
  3. Cuses real member forces and member forces caused by a unit load at the desired displacement coordinate
  4. Duses only support reactions
Show answer
Answer: C. uses real member forces and member forces caused by a unit load at the desired displacement coordinateIn structural analysis, unit-load method for trusses is correctly described as follows: uses real member forces and member forces caused by a unit load at the desired displacement coordinate.
Report a mistake

Q46. Which concept is associated with the statement: “uses real member forces and member forces caused by a unit load at the desired displacement coordinate”?

  1. Aa drafting convention only
  2. Bunit-load method for trusses
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. unit-load method for trussesThe statement describes unit-load method for trusses.
Report a mistake

Q47. Which statement best describes larger member area?

  1. Amakes force zero
  2. Breduces axial deformation for the same force, length, and modulus
  3. Cincreases deformation
  4. Dhas no effect
Show answer
Answer: B. reduces axial deformation for the same force, length, and modulusIn structural analysis, larger member area is correctly described as follows: reduces axial deformation for the same force, length, and modulus.
Report a mistake

Q48. Which concept is associated with the statement: “reduces axial deformation for the same force, length, and modulus”?

  1. Alarger member area
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. larger member areaThe statement describes larger member area.
Report a mistake

Q49. Which statement best describes truss displacement summation?

  1. Aadds member contributions consistent with their real and virtual axial forces
  2. Buses only the longest member
  3. Cignores compression members
  4. Drequires all members to have equal area
Show answer
Answer: A. adds member contributions consistent with their real and virtual axial forcesIn structural analysis, truss displacement summation is correctly described as follows: adds member contributions consistent with their real and virtual axial forces.
Report a mistake

Q50. Which concept is associated with the statement: “adds member contributions consistent with their real and virtual axial forces”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Ctruss displacement summation
  4. Da quantity unrelated to this topic
Show answer
Answer: C. truss displacement summationThe statement describes truss displacement summation.
Report a mistake