Civil Engineering · Structural Analysis

Unit 9: Slope-Deflection Method MCQs

50 solved multiple choice questions with answers and short explanations.

Q1. Which statement best describes slope-deflection method?

  1. Aexpresses member end moments in terms of joint rotations, translations, loads, and member stiffness
  2. Buses member forces without deformations
  3. Cis limited to trusses
  4. Drequires all joints pinned
Show answer
Answer: A. expresses member end moments in terms of joint rotations, translations, loads, and member stiffnessIn structural analysis, slope-deflection method is correctly described as follows: expresses member end moments in terms of joint rotations, translations, loads, and member stiffness.
Report a mistake

Q2. Which concept is associated with the statement: “expresses member end moments in terms of joint rotations, translations, loads, and member stiffness”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dslope-deflection method
Show answer
Answer: D. slope-deflection methodThe statement describes slope-deflection method.
Report a mistake

Q3. Which statement best describes member stiffness term?

  1. Acontains only area A
  2. Bis independent of length
  3. Ccontains density only
  4. Dcontains EI/L in the classical prismatic-member slope-deflection relation
Show answer
Answer: D. contains EI/L in the classical prismatic-member slope-deflection relationIn structural analysis, member stiffness term is correctly described as follows: contains EI/L in the classical prismatic-member slope-deflection relation.
Report a mistake

Q4. Which concept is associated with the statement: “contains EI/L in the classical prismatic-member slope-deflection relation”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cmember stiffness term
  4. Da quantity unrelated to this topic
Show answer
Answer: C. member stiffness termThe statement describes member stiffness term.
Report a mistake

Q5. Which statement best describes joint rotation?

  1. Ais always zero
  2. Bis a support reaction
  3. Ccontributes to member end moments in slope-deflection analysis
  4. Dhas no effect on end moments
Show answer
Answer: C. contributes to member end moments in slope-deflection analysisIn structural analysis, joint rotation is correctly described as follows: contributes to member end moments in slope-deflection analysis.
Report a mistake

Q6. Which concept is associated with the statement: “contributes to member end moments in slope-deflection analysis”?

  1. Aa drafting convention only
  2. Bjoint rotation
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. joint rotationThe statement describes joint rotation.
Report a mistake

Q7. Which statement best describes chord rotation?

  1. Ais always zero in sway frames
  2. Brepresents relative transverse joint translation divided by member length in the small-displacement formulation
  3. Cis axial strain only
  4. Dequals bending moment
Show answer
Answer: B. represents relative transverse joint translation divided by member length in the small-displacement formulationIn structural analysis, chord rotation is correctly described as follows: represents relative transverse joint translation divided by member length in the small-displacement formulation.
Report a mistake

Q8. Which concept is associated with the statement: “represents relative transverse joint translation divided by member length in the small-displacement formulation”?

  1. Achord rotation
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. chord rotationThe statement describes chord rotation.
Report a mistake

Q9. Which statement best describes fixed-end moments?

  1. Arepresent end moments caused by member loading when both ends are fixed against rotation
  2. Bare support reactions from self-weight only
  3. Care always zero
  4. Ddo not depend on loading
Show answer
Answer: A. represent end moments caused by member loading when both ends are fixed against rotationIn structural analysis, fixed-end moments is correctly described as follows: represent end moments caused by member loading when both ends are fixed against rotation.
Report a mistake

Q10. Which concept is associated with the statement: “represent end moments caused by member loading when both ends are fixed against rotation”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cfixed-end moments
  4. Da quantity unrelated to this topic
Show answer
Answer: C. fixed-end momentsThe statement describes fixed-end moments.
Report a mistake

Q11. Which statement best describes fixed-end moment?

  1. Ais the end moment developed by member loading when both member ends are fixed against rotation
  2. Bis always a support shear
  3. Cis independent of loading
  4. Doccurs only in trusses
Show answer
Answer: A. is the end moment developed by member loading when both member ends are fixed against rotationIn structural analysis, fixed-end moment is correctly described as follows: is the end moment developed by member loading when both member ends are fixed against rotation.
Report a mistake

Q12. Which concept is associated with the statement: “is the end moment developed by member loading when both member ends are fixed against rotation”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dfixed-end moment
Show answer
Answer: D. fixed-end momentThe statement describes fixed-end moment.
Report a mistake

Q13. Which statement best describes unloaded member fixed-end moments?

  1. Amust always be nonzero
  2. Bequal EI/L
  3. Care determined only by joint rotation
  4. Dare zero when there is no member load or imposed deformation producing them
Show answer
Answer: D. are zero when there is no member load or imposed deformation producing themIn structural analysis, unloaded member fixed-end moments is correctly described as follows: are zero when there is no member load or imposed deformation producing them.
Report a mistake

Q14. Which concept is associated with the statement: “are zero when there is no member load or imposed deformation producing them”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cunloaded member fixed-end moments
  4. Da quantity unrelated to this topic
Show answer
Answer: C. unloaded member fixed-end momentsThe statement describes unloaded member fixed-end moments.
Report a mistake

Q15. Which statement best describes UDL on a fixed-fixed prismatic beam?

  1. Aproduces only axial force
  2. Bmakes both reactions zero
  3. Cproduces end moments of equal magnitude and opposite end-sign convention according to the adopted member-end convention
  4. Dproduces no end moments
Show answer
Answer: C. produces end moments of equal magnitude and opposite end-sign convention according to the adopted member-end conventionIn structural analysis, UDL on a fixed-fixed prismatic beam is correctly described as follows: produces end moments of equal magnitude and opposite end-sign convention according to the adopted member-end convention.
Report a mistake

Q16. Which concept is associated with the statement: “produces end moments of equal magnitude and opposite end-sign convention according to the adopted member-end convention”?

  1. Aa drafting convention only
  2. BUDL on a fixed-fixed prismatic beam
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. UDL on a fixed-fixed prismatic beamThe statement describes UDL on a fixed-fixed prismatic beam.
Report a mistake

Q17. Which statement best describes fixed-end moments in slope-deflection?

  1. Acannot be superposed
  2. Bserve as load terms in the member end-moment equations
  3. Creplace member stiffness
  4. Dare joint displacements
Show answer
Answer: B. serve as load terms in the member end-moment equationsIn structural analysis, fixed-end moments in slope-deflection is correctly described as follows: serve as load terms in the member end-moment equations.
Report a mistake

Q18. Which concept is associated with the statement: “serve as load terms in the member end-moment equations”?

  1. Afixed-end moments in slope-deflection
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. fixed-end moments in slope-deflectionThe statement describes fixed-end moments in slope-deflection.
Report a mistake

Q19. Which statement best describes sign convention for fixed-end moments?

  1. Amust be consistent with the member-end moment convention used in the analysis
  2. Bis irrelevant
  3. Crequires all end moments positive
  4. Dchanges physical loading
Show answer
Answer: A. must be consistent with the member-end moment convention used in the analysisIn structural analysis, sign convention for fixed-end moments is correctly described as follows: must be consistent with the member-end moment convention used in the analysis.
Report a mistake

Q20. Which concept is associated with the statement: “must be consistent with the member-end moment convention used in the analysis”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Csign convention for fixed-end moments
  4. Da quantity unrelated to this topic
Show answer
Answer: C. sign convention for fixed-end momentsThe statement describes sign convention for fixed-end moments.
Report a mistake

Q21. Which statement best describes continuous beam?

  1. Aextends over more than two supports
  2. Bhas exactly one span
  3. Ccontains no bending moment
  4. Dmust be statically determinate
Show answer
Answer: A. extends over more than two supportsIn structural analysis, continuous beam is correctly described as follows: extends over more than two supports.
Report a mistake

Q22. Which concept is associated with the statement: “extends over more than two supports”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dcontinuous beam
Show answer
Answer: D. continuous beamThe statement describes continuous beam.
Report a mistake

Q23. Which statement best describes interior support continuity?

  1. Amakes spans completely independent
  2. Brequires zero moment in all cases
  3. Cremoves reactions
  4. Dcouples the behavior of adjacent spans through joint equilibrium and compatibility
Show answer
Answer: D. couples the behavior of adjacent spans through joint equilibrium and compatibilityIn structural analysis, interior support continuity is correctly described as follows: couples the behavior of adjacent spans through joint equilibrium and compatibility.
Report a mistake

Q24. Which concept is associated with the statement: “couples the behavior of adjacent spans through joint equilibrium and compatibility”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cinterior support continuity
  4. Da quantity unrelated to this topic
Show answer
Answer: C. interior support continuityThe statement describes interior support continuity.
Report a mistake

Q25. Which statement best describes continuous beam indeterminacy?

  1. Ameans the beam is unstable
  2. Bdoes not depend on supports
  3. Cgenerally requires deformation compatibility or displacement methods in addition to equilibrium
  4. Dcan always be solved by global equilibrium alone
Show answer
Answer: C. generally requires deformation compatibility or displacement methods in addition to equilibriumIn structural analysis, continuous beam indeterminacy is correctly described as follows: generally requires deformation compatibility or displacement methods in addition to equilibrium.
Report a mistake

Q26. Which concept is associated with the statement: “generally requires deformation compatibility or displacement methods in addition to equilibrium”?

  1. Aa drafting convention only
  2. Bcontinuous beam indeterminacy
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. continuous beam indeterminacyThe statement describes continuous beam indeterminacy.
Report a mistake

Q27. Which statement best describes joint equilibrium in slope-deflection?

  1. Aignores connected spans
  2. Brequires the algebraic sum of member-end moments and applied joint moments at an unrestrained rotational joint to balance
  3. Crequires all member moments zero
  4. Duses only vertical forces
Show answer
Answer: B. requires the algebraic sum of member-end moments and applied joint moments at an unrestrained rotational joint to balanceIn structural analysis, joint equilibrium in slope-deflection is correctly described as follows: requires the algebraic sum of member-end moments and applied joint moments at an unrestrained rotational joint to balance.
Report a mistake

Q28. Which concept is associated with the statement: “requires the algebraic sum of member-end moments and applied joint moments at an unrestrained rotational joint to balance”?

  1. Ajoint equilibrium in slope-deflection
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. joint equilibrium in slope-deflectionThe statement describes joint equilibrium in slope-deflection.
Report a mistake

Q29. Which statement best describes support settlement in continuous beams?

  1. Acan induce member end moments even without additional transverse loading
  2. Bhas no structural effect
  3. Calways reduces moments to zero
  4. Dis impossible to include in analysis
Show answer
Answer: A. can induce member end moments even without additional transverse loadingIn structural analysis, support settlement in continuous beams is correctly described as follows: can induce member end moments even without additional transverse loading.
Report a mistake

Q30. Which concept is associated with the statement: “can induce member end moments even without additional transverse loading”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Csupport settlement in continuous beams
  4. Da quantity unrelated to this topic
Show answer
Answer: C. support settlement in continuous beamsThe statement describes support settlement in continuous beams.
Report a mistake

Q31. Which statement best describes no-sway frame?

  1. Ahas no lateral joint translation in the idealized analysis
  2. Bhas no joint rotations
  3. Ccontains no bending
  4. Dmust have pin joints
Show answer
Answer: A. has no lateral joint translation in the idealized analysisIn structural analysis, no-sway frame is correctly described as follows: has no lateral joint translation in the idealized analysis.
Report a mistake

Q32. Which concept is associated with the statement: “has no lateral joint translation in the idealized analysis”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dno-sway frame
Show answer
Answer: D. no-sway frameThe statement describes no-sway frame.
Report a mistake

Q33. Which statement best describes slope-deflection for no-sway frame?

  1. Asets all member moments to zero
  2. Bignores joint rotations
  3. Crequires no equilibrium
  4. Dsets the relevant chord-rotation or sidesway term to zero
Show answer
Answer: D. sets the relevant chord-rotation or sidesway term to zeroIn structural analysis, slope-deflection for no-sway frame is correctly described as follows: sets the relevant chord-rotation or sidesway term to zero.
Report a mistake

Q34. Which concept is associated with the statement: “sets the relevant chord-rotation or sidesway term to zero”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cslope-deflection for no-sway frame
  4. Da quantity unrelated to this topic
Show answer
Answer: C. slope-deflection for no-sway frameThe statement describes slope-deflection for no-sway frame.
Report a mistake

Q35. Which statement best describes joint equilibrium?

  1. Auses only axial forces
  2. Brequires all joints fixed
  3. Cis used with member slope-deflection equations to solve unknown rotations
  4. Dis unnecessary in frames
Show answer
Answer: C. is used with member slope-deflection equations to solve unknown rotationsIn structural analysis, joint equilibrium is correctly described as follows: is used with member slope-deflection equations to solve unknown rotations.
Report a mistake

Q36. Which concept is associated with the statement: “is used with member slope-deflection equations to solve unknown rotations”?

  1. Aa drafting convention only
  2. Bjoint equilibrium
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. joint equilibriumThe statement describes joint equilibrium.
Report a mistake

Q37. Which statement best describes symmetry and loading?

  1. Amakes rotations zero everywhere
  2. Bmay prevent sidesway in a symmetric frame under symmetric loading
  3. Calways causes sidesway
  4. Deliminates bending moments
Show answer
Answer: B. may prevent sidesway in a symmetric frame under symmetric loadingIn structural analysis, symmetry and loading is correctly described as follows: may prevent sidesway in a symmetric frame under symmetric loading.
Report a mistake

Q38. Which concept is associated with the statement: “may prevent sidesway in a symmetric frame under symmetric loading”?

  1. Asymmetry and loading
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. symmetry and loadingThe statement describes symmetry and loading.
Report a mistake

Q39. Which statement best describes bracing effect?

  1. Acan restrain lateral translation and justify a no-sway idealization
  2. Balways creates a mechanism
  3. Cremoves vertical reactions
  4. Dmakes EI irrelevant
Show answer
Answer: A. can restrain lateral translation and justify a no-sway idealizationIn structural analysis, bracing effect is correctly described as follows: can restrain lateral translation and justify a no-sway idealization.
Report a mistake

Q40. Which concept is associated with the statement: “can restrain lateral translation and justify a no-sway idealization”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cbracing effect
  4. Da quantity unrelated to this topic
Show answer
Answer: C. bracing effectThe statement describes bracing effect.
Report a mistake

Q41. Which statement best describes sway frame?

  1. Apermits lateral translation of one or more joints
  2. Bhas zero lateral displacement by definition
  3. Cmust be statically determinate
  4. Dcontains no rotations
Show answer
Answer: A. permits lateral translation of one or more jointsIn structural analysis, sway frame is correctly described as follows: permits lateral translation of one or more joints.
Report a mistake

Q42. Which concept is associated with the statement: “permits lateral translation of one or more joints”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dsway frame
Show answer
Answer: D. sway frameThe statement describes sway frame.
Report a mistake

Q43. Which statement best describes sidesway term?

  1. Ais always omitted
  2. Bis a material strength term
  3. Cequals support reaction
  4. Dmust be included in member end-moment relations when relative joint translation occurs
Show answer
Answer: D. must be included in member end-moment relations when relative joint translation occursIn structural analysis, sidesway term is correctly described as follows: must be included in member end-moment relations when relative joint translation occurs.
Report a mistake

Q44. Which concept is associated with the statement: “must be included in member end-moment relations when relative joint translation occurs”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Csidesway term
  4. Da quantity unrelated to this topic
Show answer
Answer: C. sidesway termThe statement describes sidesway term.
Report a mistake

Q45. Which statement best describes additional equation for sway?

  1. Acomes only from vertical force equilibrium
  2. Brequires all moments zero
  3. Cis obtained from horizontal equilibrium or an equivalent shear equilibrium condition
  4. Dis never required
Show answer
Answer: C. is obtained from horizontal equilibrium or an equivalent shear equilibrium conditionIn structural analysis, additional equation for sway is correctly described as follows: is obtained from horizontal equilibrium or an equivalent shear equilibrium condition.
Report a mistake

Q46. Which concept is associated with the statement: “is obtained from horizontal equilibrium or an equivalent shear equilibrium condition”?

  1. Aa drafting convention only
  2. Badditional equation for sway
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. additional equation for swayThe statement describes additional equation for sway.
Report a mistake

Q47. Which statement best describes unsymmetrical loading?

  1. Aeliminates column moments
  2. Bcan produce sidesway in an unbraced frame
  3. Ccan never cause lateral translation
  4. Dalways creates a no-sway condition
Show answer
Answer: B. can produce sidesway in an unbraced frameIn structural analysis, unsymmetrical loading is correctly described as follows: can produce sidesway in an unbraced frame.
Report a mistake

Q48. Which concept is associated with the statement: “can produce sidesway in an unbraced frame”?

  1. Aunsymmetrical loading
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. unsymmetrical loadingThe statement describes unsymmetrical loading.
Report a mistake

Q49. Which statement best describes column chord rotation in sway?

  1. Ais related to relative lateral translation divided by column length for small displacements
  2. Bequals axial force
  3. Cis independent of translation
  4. Dis always one radian
Show answer
Answer: A. is related to relative lateral translation divided by column length for small displacementsIn structural analysis, column chord rotation in sway is correctly described as follows: is related to relative lateral translation divided by column length for small displacements.
Report a mistake

Q50. Which concept is associated with the statement: “is related to relative lateral translation divided by column length for small displacements”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Ccolumn chord rotation in sway
  4. Da quantity unrelated to this topic
Show answer
Answer: C. column chord rotation in swayThe statement describes column chord rotation in sway.
Report a mistake