Civil Engineering · Structural Analysis

Unit 4: Beams & Frames MCQs

50 solved multiple choice questions with answers and short explanations.

Q1. Which statement best describes point load?

  1. Ais idealized as acting at a specific location on a beam
  2. Bis measured as force per unit length
  3. Chas no magnitude
  4. Dmust act at a support
Show answer
Answer: A. is idealized as acting at a specific location on a beamIn structural analysis, point load is correctly described as follows: is idealized as acting at a specific location on a beam.
Report a mistake

Q2. Which concept is associated with the statement: “is idealized as acting at a specific location on a beam”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dpoint load
Show answer
Answer: D. point loadThe statement describes point load.
Report a mistake

Q3. Which statement best describes uniformly distributed load?

  1. Ahas zero resultant
  2. Balways varies linearly
  3. Cis a pure couple
  4. Dhas constant load intensity over its loaded length
Show answer
Answer: D. has constant load intensity over its loaded lengthIn structural analysis, uniformly distributed load is correctly described as follows: has constant load intensity over its loaded length.
Report a mistake

Q4. Which concept is associated with the statement: “has constant load intensity over its loaded length”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cuniformly distributed load
  4. Da quantity unrelated to this topic
Show answer
Answer: C. uniformly distributed loadThe statement describes uniformly distributed load.
Report a mistake

Q5. Which statement best describes triangular distributed load resultant?

  1. Ahas zero moment
  2. Bequals load intensity divided by length
  3. Cacts through the centroid of the triangular load diagram
  4. Dalways acts at midspan
Show answer
Answer: C. acts through the centroid of the triangular load diagramIn structural analysis, triangular distributed load resultant is correctly described as follows: acts through the centroid of the triangular load diagram.
Report a mistake

Q6. Which concept is associated with the statement: “acts through the centroid of the triangular load diagram”?

  1. Aa drafting convention only
  2. Btriangular distributed load resultant
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. triangular distributed load resultantThe statement describes triangular distributed load resultant.
Report a mistake

Q7. Which statement best describes applied couple?

  1. Acannot affect bending moment
  2. Bproduces a moment without a net force
  3. Cis identical to a point force
  4. Dhas units of force per length
Show answer
Answer: B. produces a moment without a net forceIn structural analysis, applied couple is correctly described as follows: produces a moment without a net force.
Report a mistake

Q8. Which concept is associated with the statement: “produces a moment without a net force”?

  1. Aapplied couple
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. applied coupleThe statement describes applied couple.
Report a mistake

Q9. Which statement best describes load conversion?

  1. Aa distributed load resultant equals the area under its load-intensity diagram
  2. Balways equals the beam span
  3. Cdoes not depend on intensity
  4. Dmust act at the left support
Show answer
Answer: A. a distributed load resultant equals the area under its load-intensity diagramIn structural analysis, load conversion is correctly described as follows: a distributed load resultant equals the area under its load-intensity diagram.
Report a mistake

Q10. Which concept is associated with the statement: “a distributed load resultant equals the area under its load-intensity diagram”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cload conversion
  4. Da quantity unrelated to this topic
Show answer
Answer: C. load conversionThe statement describes load conversion.
Report a mistake

Q11. Which statement best describes beam shear force?

  1. Ais the internal transverse force at a section
  2. Bis the slope of deflection only
  3. Cis measured in force-length units
  4. Dis always zero
Show answer
Answer: A. is the internal transverse force at a sectionIn structural analysis, beam shear force is correctly described as follows: is the internal transverse force at a section.
Report a mistake

Q12. Which concept is associated with the statement: “is the internal transverse force at a section”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dbeam shear force
Show answer
Answer: D. beam shear forceThe statement describes beam shear force.
Report a mistake

Q13. Which statement best describes point load effect on shear diagram?

  1. Acauses only a smooth parabola
  2. Bhas no effect
  3. Calways creates a horizontal plateau in moment
  4. Dcauses a jump equal to the load magnitude with sign according to convention
Show answer
Answer: D. causes a jump equal to the load magnitude with sign according to conventionIn structural analysis, point load effect on shear diagram is correctly described as follows: causes a jump equal to the load magnitude with sign according to convention.
Report a mistake

Q14. Which concept is associated with the statement: “causes a jump equal to the load magnitude with sign according to convention”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cpoint load effect on shear diagram
  4. Da quantity unrelated to this topic
Show answer
Answer: C. point load effect on shear diagramThe statement describes point load effect on shear diagram.
Report a mistake

Q15. Which statement best describes distributed load relation?

  1. Ashear equals bending stiffness
  2. Bload intensity is the derivative of deflection only
  3. Cthe rate of change of shear with position is related to load intensity
  4. Dshear is unrelated to loading
Show answer
Answer: C. the rate of change of shear with position is related to load intensityIn structural analysis, distributed load relation is correctly described as follows: the rate of change of shear with position is related to load intensity.
Report a mistake

Q16. Which concept is associated with the statement: “the rate of change of shear with position is related to load intensity”?

  1. Aa drafting convention only
  2. Bdistributed load relation
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. distributed load relationThe statement describes distributed load relation.
Report a mistake

Q17. Which statement best describes zero distributed load region?

  1. Amoment is necessarily zero
  2. Bshear is constant between concentrated actions
  3. Cshear must be zero
  4. Dshear varies quadratically
Show answer
Answer: B. shear is constant between concentrated actionsIn structural analysis, zero distributed load region is correctly described as follows: shear is constant between concentrated actions.
Report a mistake

Q18. Which concept is associated with the statement: “shear is constant between concentrated actions”?

  1. Azero distributed load region
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. zero distributed load regionThe statement describes zero distributed load region.
Report a mistake

Q19. Which statement best describes shear sign convention?

  1. Amust be applied consistently throughout analysis
  2. Bhas no effect on diagram interpretation
  3. Crequires all shear values positive
  4. Dis identical in every textbook
Show answer
Answer: A. must be applied consistently throughout analysisIn structural analysis, shear sign convention is correctly described as follows: must be applied consistently throughout analysis.
Report a mistake

Q20. Which concept is associated with the statement: “must be applied consistently throughout analysis”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cshear sign convention
  4. Da quantity unrelated to this topic
Show answer
Answer: C. shear sign conventionThe statement describes shear sign convention.
Report a mistake

Q21. Which statement best describes bending moment?

  1. Ais the internal couple resisting bending at a section
  2. Bis a force per unit area
  3. Cis always equal to shear
  4. Dcannot exist in beams
Show answer
Answer: A. is the internal couple resisting bending at a sectionIn structural analysis, bending moment is correctly described as follows: is the internal couple resisting bending at a section.
Report a mistake

Q22. Which concept is associated with the statement: “is the internal couple resisting bending at a section”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dbending moment
Show answer
Answer: D. bending momentThe statement describes bending moment.
Report a mistake

Q23. Which statement best describes shear-moment relation?

  1. Amoment is unrelated to shear
  2. Bmoment derivative equals axial force
  3. Cshear derivative always equals moment
  4. Dthe rate of change of bending moment with position equals shear under a consistent sign convention
Show answer
Answer: D. the rate of change of bending moment with position equals shear under a consistent sign conventionIn structural analysis, shear-moment relation is correctly described as follows: the rate of change of bending moment with position equals shear under a consistent sign convention.
Report a mistake

Q24. Which concept is associated with the statement: “the rate of change of bending moment with position equals shear under a consistent sign convention”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cshear-moment relation
  4. Da quantity unrelated to this topic
Show answer
Answer: C. shear-moment relationThe statement describes shear-moment relation.
Report a mistake

Q25. Which statement best describes point couple effect on moment diagram?

  1. Ahas no effect on moment
  2. Balways makes moment zero
  3. Ccauses a jump in the bending-moment diagram
  4. Dcauses a jump only in shear
Show answer
Answer: C. causes a jump in the bending-moment diagramIn structural analysis, point couple effect on moment diagram is correctly described as follows: causes a jump in the bending-moment diagram.
Report a mistake

Q26. Which concept is associated with the statement: “causes a jump in the bending-moment diagram”?

  1. Aa drafting convention only
  2. Bpoint couple effect on moment diagram
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. point couple effect on moment diagramThe statement describes point couple effect on moment diagram.
Report a mistake

Q27. Which statement best describes simple support idealization?

  1. Acreates three reactions in 2D
  2. Bdoes not provide an external moment reaction
  3. Calways provides a fixed-end moment
  4. Dprevents rotation
Show answer
Answer: B. does not provide an external moment reactionIn structural analysis, simple support idealization is correctly described as follows: does not provide an external moment reaction.
Report a mistake

Q28. Which concept is associated with the statement: “does not provide an external moment reaction”?

  1. Asimple support idealization
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. simple support idealizationThe statement describes simple support idealization.
Report a mistake

Q29. Which statement best describes location of local moment extremum?

  1. Aoften occurs where shear passes through zero in a smooth region
  2. Bmust occur where load is maximum
  3. Calways occurs at a pin
  4. Dcannot occur inside a span
Show answer
Answer: A. often occurs where shear passes through zero in a smooth regionIn structural analysis, location of local moment extremum is correctly described as follows: often occurs where shear passes through zero in a smooth region.
Report a mistake

Q30. Which concept is associated with the statement: “often occurs where shear passes through zero in a smooth region”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Clocation of local moment extremum
  4. Da quantity unrelated to this topic
Show answer
Answer: C. location of local moment extremumThe statement describes location of local moment extremum.
Report a mistake

Q31. Which statement best describes SFD?

  1. Aplots internal shear force along the member
  2. Bplots only displacement
  3. Cplots material stress only
  4. Dshows support type only
Show answer
Answer: A. plots internal shear force along the memberIn structural analysis, SFD is correctly described as follows: plots internal shear force along the member.
Report a mistake

Q32. Which concept is associated with the statement: “plots internal shear force along the member”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. DSFD
Show answer
Answer: D. SFDThe statement describes SFD.
Report a mistake

Q33. Which statement best describes BMD?

  1. Aplots axial strain only
  2. Bcontains no sign convention
  3. Cis identical to the loading diagram
  4. Dplots internal bending moment along the member
Show answer
Answer: D. plots internal bending moment along the memberIn structural analysis, BMD is correctly described as follows: plots internal bending moment along the member.
Report a mistake

Q34. Which concept is associated with the statement: “plots internal bending moment along the member”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. CBMD
  4. Da quantity unrelated to this topic
Show answer
Answer: C. BMDThe statement describes BMD.
Report a mistake

Q35. Which statement best describes UDL effect?

  1. Aproduces quadratic shear and cubic load
  2. Bhas no effect on diagrams
  3. Cproduces linear variation of shear and quadratic variation of moment
  4. Dproduces constant shear and constant moment
Show answer
Answer: C. produces linear variation of shear and quadratic variation of momentIn structural analysis, UDL effect is correctly described as follows: produces linear variation of shear and quadratic variation of moment.
Report a mistake

Q36. Which concept is associated with the statement: “produces linear variation of shear and quadratic variation of moment”?

  1. Aa drafting convention only
  2. BUDL effect
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. UDL effectThe statement describes UDL effect.
Report a mistake

Q37. Which statement best describes point load on diagrams?

  1. Aalways creates a moment discontinuity
  2. Bcreates a shear jump while moment remains continuous if no applied couple occurs there
  3. Ccreates a moment jump only
  4. Dmakes both diagrams zero
Show answer
Answer: B. creates a shear jump while moment remains continuous if no applied couple occurs thereIn structural analysis, point load on diagrams is correctly described as follows: creates a shear jump while moment remains continuous if no applied couple occurs there.
Report a mistake

Q38. Which concept is associated with the statement: “creates a shear jump while moment remains continuous if no applied couple occurs there”?

  1. Apoint load on diagrams
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. point load on diagramsThe statement describes point load on diagrams.
Report a mistake

Q39. Which statement best describes diagram consistency check?

  1. Achanges in shear and moment should agree with load-shear-moment relationships
  2. Bdiagram shapes are arbitrary
  3. Csupport reactions need not match
  4. Dareas under diagrams have no meaning
Show answer
Answer: A. changes in shear and moment should agree with load-shear-moment relationshipsIn structural analysis, diagram consistency check is correctly described as follows: changes in shear and moment should agree with load-shear-moment relationships.
Report a mistake

Q40. Which concept is associated with the statement: “changes in shear and moment should agree with load-shear-moment relationships”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cdiagram consistency check
  4. Da quantity unrelated to this topic
Show answer
Answer: C. diagram consistency checkThe statement describes diagram consistency check.
Report a mistake

Q41. Which statement best describes frame member?

  1. Amay carry axial force, shear force, and bending moment
  2. Bcan carry axial force only
  3. Ccannot carry moment
  4. Dmust be a two-force member
Show answer
Answer: A. may carry axial force, shear force, and bending momentIn structural analysis, frame member is correctly described as follows: may carry axial force, shear force, and bending moment.
Report a mistake

Q42. Which concept is associated with the statement: “may carry axial force, shear force, and bending moment”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dframe member
Show answer
Answer: D. frame memberThe statement describes frame member.
Report a mistake

Q43. Which statement best describes rigid joint?

  1. Aacts exactly like an ideal pin
  2. Bcannot transfer shear
  3. Callows unrestricted relative rotation
  4. Dtransfers forces and bending moments between connected members
Show answer
Answer: D. transfers forces and bending moments between connected membersIn structural analysis, rigid joint is correctly described as follows: transfers forces and bending moments between connected members.
Report a mistake

Q44. Which concept is associated with the statement: “transfers forces and bending moments between connected members”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Crigid joint
  4. Da quantity unrelated to this topic
Show answer
Answer: C. rigid jointThe statement describes rigid joint.
Report a mistake

Q45. Which statement best describes frame free-body diagram?

  1. Acontains internal stresses only
  2. Bcannot include applied moments
  3. Cincludes external loads and support reactions for the isolated frame
  4. Domits reactions
Show answer
Answer: C. includes external loads and support reactions for the isolated frameIn structural analysis, frame free-body diagram is correctly described as follows: includes external loads and support reactions for the isolated frame.
Report a mistake

Q46. Which concept is associated with the statement: “includes external loads and support reactions for the isolated frame”?

  1. Aa drafting convention only
  2. Bframe free-body diagram
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. frame free-body diagramThe statement describes frame free-body diagram.
Report a mistake

Q47. Which statement best describes internal hinge in a frame?

  1. Aremoves all force transfer
  2. Bhas zero bending moment at the ideal hinge
  3. Chas infinite bending moment
  4. Dprevents relative rotation
Show answer
Answer: B. has zero bending moment at the ideal hingeIn structural analysis, internal hinge in a frame is correctly described as follows: has zero bending moment at the ideal hinge.
Report a mistake

Q48. Which concept is associated with the statement: “has zero bending moment at the ideal hinge”?

  1. Ainternal hinge in a frame
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. internal hinge in a frameThe statement describes internal hinge in a frame.
Report a mistake

Q49. Which statement best describes determinate frame analysis?

  1. Auses equilibrium of the whole frame and suitable member or sub-body free bodies
  2. Brequires stiffness methods in every case
  3. Ccannot use moments
  4. Dignores internal hinges
Show answer
Answer: A. uses equilibrium of the whole frame and suitable member or sub-body free bodiesIn structural analysis, determinate frame analysis is correctly described as follows: uses equilibrium of the whole frame and suitable member or sub-body free bodies.
Report a mistake

Q50. Which concept is associated with the statement: “uses equilibrium of the whole frame and suitable member or sub-body free bodies”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cdeterminate frame analysis
  4. Da quantity unrelated to this topic
Show answer
Answer: C. determinate frame analysisThe statement describes determinate frame analysis.
Report a mistake