Civil Engineering · Structural Analysis

Unit 2: Statically Determinate Structures MCQs

50 solved multiple choice questions with answers and short explanations.

Q1. Which statement best describes planar equilibrium?

  1. AΣFx = 0, ΣFy = 0, and ΣM = 0
  2. Bcompatibility alone
  3. Cmaterial yield only
  4. Ddeflection boundary conditions only
Show answer
Answer: A. ΣFx = 0, ΣFy = 0, and ΣM = 0In structural analysis, planar equilibrium is correctly described as follows: ΣFx = 0, ΣFy = 0, and ΣM = 0.
Report a mistake

Q2. Which concept is associated with the statement: “ΣFx = 0, ΣFy = 0, and ΣM = 0”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dplanar equilibrium
Show answer
Answer: D. planar equilibriumThe statement describes planar equilibrium.
Report a mistake

Q3. Which statement best describes moment equilibrium?

  1. Aall member moments are individually zero
  2. Bonly vertical forces are considered
  3. Csupport reactions are ignored
  4. Dthe algebraic sum of moments about any point is zero
Show answer
Answer: D. the algebraic sum of moments about any point is zeroIn structural analysis, moment equilibrium is correctly described as follows: the algebraic sum of moments about any point is zero.
Report a mistake

Q4. Which concept is associated with the statement: “the algebraic sum of moments about any point is zero”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cmoment equilibrium
  4. Da quantity unrelated to this topic
Show answer
Answer: C. moment equilibriumThe statement describes moment equilibrium.
Report a mistake

Q5. Which statement best describes force equilibrium?

  1. Aall loads must be vertical
  2. Bmoments need not balance
  3. Cthe vector sum of external forces is zero
  4. Dall forces must have equal magnitudes
Show answer
Answer: C. the vector sum of external forces is zeroIn structural analysis, force equilibrium is correctly described as follows: the vector sum of external forces is zero.
Report a mistake

Q6. Which concept is associated with the statement: “the vector sum of external forces is zero”?

  1. Aa drafting convention only
  2. Bforce equilibrium
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. force equilibriumThe statement describes force equilibrium.
Report a mistake

Q7. Which statement best describes equilibrium equations?

  1. Athey require every support to be fixed
  2. Bthey determine unknown forces in statically determinate systems
  3. Cthey directly determine elastic modulus
  4. Dthey eliminate the need for a free-body diagram
Show answer
Answer: B. they determine unknown forces in statically determinate systemsIn structural analysis, equilibrium equations is correctly described as follows: they determine unknown forces in statically determinate systems.
Report a mistake

Q8. Which concept is associated with the statement: “they determine unknown forces in statically determinate systems”?

  1. Aequilibrium equations
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. equilibrium equationsThe statement describes equilibrium equations.
Report a mistake

Q9. Which statement best describes concurrent force system?

  1. Aall force lines of action intersect at a common point
  2. Ball forces are parallel
  3. Call moments vanish regardless of forces
  4. Dall forces act at different planes
Show answer
Answer: A. all force lines of action intersect at a common pointIn structural analysis, concurrent force system is correctly described as follows: all force lines of action intersect at a common point.
Report a mistake

Q10. Which concept is associated with the statement: “all force lines of action intersect at a common point”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cconcurrent force system
  4. Da quantity unrelated to this topic
Show answer
Answer: C. concurrent force systemThe statement describes concurrent force system.
Report a mistake

Q11. Which statement best describes roller support in 2D?

  1. Aone reaction normal to the supporting surface
  2. Btwo force reactions and a moment
  3. Ca moment reaction only
  4. Dno reaction
Show answer
Answer: A. one reaction normal to the supporting surfaceIn structural analysis, roller support in 2D is correctly described as follows: one reaction normal to the supporting surface.
Report a mistake

Q12. Which concept is associated with the statement: “one reaction normal to the supporting surface”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Droller support in 2D
Show answer
Answer: D. roller support in 2DThe statement describes roller support in 2D.
Report a mistake

Q13. Which statement best describes pin support in 2D?

  1. Aone force and one moment
  2. Bthree force components
  3. Ca moment only
  4. Dtwo force reaction components and no moment reaction
Show answer
Answer: D. two force reaction components and no moment reactionIn structural analysis, pin support in 2D is correctly described as follows: two force reaction components and no moment reaction.
Report a mistake

Q14. Which concept is associated with the statement: “two force reaction components and no moment reaction”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cpin support in 2D
  4. Da quantity unrelated to this topic
Show answer
Answer: C. pin support in 2DThe statement describes pin support in 2D.
Report a mistake

Q15. Which statement best describes fixed support in 2D?

  1. Atwo forces with free rotation
  2. Bmoment only
  3. Chorizontal force, vertical force, and moment reactions
  4. Dvertical force only
Show answer
Answer: C. horizontal force, vertical force, and moment reactionsIn structural analysis, fixed support in 2D is correctly described as follows: horizontal force, vertical force, and moment reactions.
Report a mistake

Q16. Which concept is associated with the statement: “horizontal force, vertical force, and moment reactions”?

  1. Aa drafting convention only
  2. Bfixed support in 2D
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. fixed support in 2DThe statement describes fixed support in 2D.
Report a mistake

Q17. Which statement best describes inclined roller reaction?

  1. Ait acts tangent to the surface
  2. Bit acts normal to the smooth supporting surface
  3. Cit is always vertical
  4. Dit is always horizontal
Show answer
Answer: B. it acts normal to the smooth supporting surfaceIn structural analysis, inclined roller reaction is correctly described as follows: it acts normal to the smooth supporting surface.
Report a mistake

Q18. Which concept is associated with the statement: “it acts normal to the smooth supporting surface”?

  1. Ainclined roller reaction
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. inclined roller reactionThe statement describes inclined roller reaction.
Report a mistake

Q19. Which statement best describes support reaction calculation?

  1. Aa complete free-body diagram and equilibrium equations are used
  2. Bonly member stiffness is needed
  3. Cloads may be omitted
  4. Dsupport type has no effect
Show answer
Answer: A. a complete free-body diagram and equilibrium equations are usedIn structural analysis, support reaction calculation is correctly described as follows: a complete free-body diagram and equilibrium equations are used.
Report a mistake

Q20. Which concept is associated with the statement: “a complete free-body diagram and equilibrium equations are used”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Csupport reaction calculation
  4. Da quantity unrelated to this topic
Show answer
Answer: C. support reaction calculationThe statement describes support reaction calculation.
Report a mistake

Q21. Which statement best describes axial force?

  1. Aacts along the member axis
  2. Bacts only perpendicular to the member
  3. Cis identical to bending moment
  4. Dcannot occur in a truss
Show answer
Answer: A. acts along the member axisIn structural analysis, axial force is correctly described as follows: acts along the member axis.
Report a mistake

Q22. Which concept is associated with the statement: “acts along the member axis”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Daxial force
Show answer
Answer: D. axial forceThe statement describes axial force.
Report a mistake

Q23. Which statement best describes shear force?

  1. Ais measured in units of moment
  2. Balways equals zero in beams
  3. Cacts only along the member axis
  4. Dacts transverse to the member axis on a cut section
Show answer
Answer: D. acts transverse to the member axis on a cut sectionIn structural analysis, shear force is correctly described as follows: acts transverse to the member axis on a cut section.
Report a mistake

Q24. Which concept is associated with the statement: “acts transverse to the member axis on a cut section”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cshear force
  4. Da quantity unrelated to this topic
Show answer
Answer: C. shear forceThe statement describes shear force.
Report a mistake

Q25. Which statement best describes bending moment?

  1. Ais measured as force per area
  2. Bis always zero in frames
  3. Crepresents the internal couple associated with bending
  4. Dis a translational displacement
Show answer
Answer: C. represents the internal couple associated with bendingIn structural analysis, bending moment is correctly described as follows: represents the internal couple associated with bending.
Report a mistake

Q26. Which concept is associated with the statement: “represents the internal couple associated with bending”?

  1. Aa drafting convention only
  2. Bbending moment
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. bending momentThe statement describes bending moment.
Report a mistake

Q27. Which statement best describes section cut?

  1. Achanges material properties
  2. Bexposes internal axial force, shear force, and bending moment
  3. Cremoves all external loads
  4. Dautomatically makes the member unstable
Show answer
Answer: B. exposes internal axial force, shear force, and bending momentIn structural analysis, section cut is correctly described as follows: exposes internal axial force, shear force, and bending moment.
Report a mistake

Q28. Which concept is associated with the statement: “exposes internal axial force, shear force, and bending moment”?

  1. Asection cut
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. section cutThe statement describes section cut.
Report a mistake

Q29. Which statement best describes sign convention?

  1. Amust be used consistently when reporting internal actions
  2. Bchanges the physical equilibrium
  3. Cis unnecessary for diagrams
  4. Drequires all answers to be positive
Show answer
Answer: A. must be used consistently when reporting internal actionsIn structural analysis, sign convention is correctly described as follows: must be used consistently when reporting internal actions.
Report a mistake

Q30. Which concept is associated with the statement: “must be used consistently when reporting internal actions”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Csign convention
  4. Da quantity unrelated to this topic
Show answer
Answer: C. sign conventionThe statement describes sign convention.
Report a mistake

Q31. Which statement best describes free-body diagram?

  1. Aisolates a body and shows all relevant external forces and moments
  2. Bshows only member dimensions
  3. Comits support reactions
  4. Dcontains only internal stresses
Show answer
Answer: A. isolates a body and shows all relevant external forces and momentsIn structural analysis, free-body diagram is correctly described as follows: isolates a body and shows all relevant external forces and moments.
Report a mistake

Q32. Which concept is associated with the statement: “isolates a body and shows all relevant external forces and moments”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dfree-body diagram
Show answer
Answer: D. free-body diagramThe statement describes free-body diagram.
Report a mistake

Q33. Which statement best describes support replacement?

  1. Asupports are deleted without reactions
  2. Ball supports become fixed
  3. Call reactions are assumed vertical
  4. Dsupports are replaced by their appropriate reaction components
Show answer
Answer: D. supports are replaced by their appropriate reaction componentsIn structural analysis, support replacement is correctly described as follows: supports are replaced by their appropriate reaction components.
Report a mistake

Q34. Which concept is associated with the statement: “supports are replaced by their appropriate reaction components”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Csupport replacement
  4. Da quantity unrelated to this topic
Show answer
Answer: C. support replacementThe statement describes support replacement.
Report a mistake

Q35. Which statement best describes distributed load on an FBD?

  1. Ahas no line of action
  2. Bcannot create moment
  3. Cmay be retained or replaced by an equivalent resultant for global equilibrium
  4. Dmust always be ignored
Show answer
Answer: C. may be retained or replaced by an equivalent resultant for global equilibriumIn structural analysis, distributed load on an FBD is correctly described as follows: may be retained or replaced by an equivalent resultant for global equilibrium.
Report a mistake

Q36. Which concept is associated with the statement: “may be retained or replaced by an equivalent resultant for global equilibrium”?

  1. Aa drafting convention only
  2. Bdistributed load on an FBD
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. distributed load on an FBDThe statement describes distributed load on an FBD.
Report a mistake

Q37. Which statement best describes internal cut FBD?

  1. Ais used only for indeterminate structures
  2. Bincludes internal resultants exposed at the cut
  3. Ccontains no forces at the cut
  4. Drequires removing all applied loads
Show answer
Answer: B. includes internal resultants exposed at the cutIn structural analysis, internal cut FBD is correctly described as follows: includes internal resultants exposed at the cut.
Report a mistake

Q38. Which concept is associated with the statement: “includes internal resultants exposed at the cut”?

  1. Ainternal cut FBD
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. internal cut FBDThe statement describes internal cut FBD.
Report a mistake

Q39. Which statement best describes FBD completeness?

  1. Aall applied loads and relevant reactions must be represented
  2. Bonly vertical loads matter
  3. Cdimensions never matter
  4. Dmoments should always be omitted
Show answer
Answer: A. all applied loads and relevant reactions must be representedIn structural analysis, FBD completeness is correctly described as follows: all applied loads and relevant reactions must be represented.
Report a mistake

Q40. Which concept is associated with the statement: “all applied loads and relevant reactions must be represented”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. CFBD completeness
  4. Da quantity unrelated to this topic
Show answer
Answer: C. FBD completenessThe statement describes FBD completeness.
Report a mistake

Q41. Which statement best describes statically determinate structure?

  1. Aunknown forces can be found from equilibrium equations alone
  2. Brequires compatibility to find every reaction
  3. Calways has fixed supports
  4. Dmust contain no internal forces
Show answer
Answer: A. unknown forces can be found from equilibrium equations aloneIn structural analysis, statically determinate structure is correctly described as follows: unknown forces can be found from equilibrium equations alone.
Report a mistake

Q42. Which concept is associated with the statement: “unknown forces can be found from equilibrium equations alone”?

  1. Aa quantity unrelated to this topic
  2. Ba material-strength parameter only
  3. Ca drafting convention only
  4. Dstatically determinate structure
Show answer
Answer: D. statically determinate structureThe statement describes statically determinate structure.
Report a mistake

Q43. Which statement best describes static indeterminacy?

  1. Ameans the structure has no supports
  2. Bis the same as instability
  3. Cdepends only on material strength
  4. Darises when independent force unknowns exceed available equilibrium equations
Show answer
Answer: D. arises when independent force unknowns exceed available equilibrium equationsIn structural analysis, static indeterminacy is correctly described as follows: arises when independent force unknowns exceed available equilibrium equations.
Report a mistake

Q44. Which concept is associated with the statement: “arises when independent force unknowns exceed available equilibrium equations”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cstatic indeterminacy
  4. Da quantity unrelated to this topic
Show answer
Answer: C. static indeterminacyThe statement describes static indeterminacy.
Report a mistake

Q45. Which statement best describes external determinacy in a planar rigid body?

  1. Aonly one equation is available
  2. Bequilibrium equations cannot determine reactions
  3. Cthree independent global equilibrium equations are available
  4. Dsix global equations are always available
Show answer
Answer: C. three independent global equilibrium equations are availableIn structural analysis, external determinacy in a planar rigid body is correctly described as follows: three independent global equilibrium equations are available.
Report a mistake

Q46. Which concept is associated with the statement: “three independent global equilibrium equations are available”?

  1. Aa drafting convention only
  2. Bexternal determinacy in a planar rigid body
  3. Ca quantity unrelated to this topic
  4. Da material-strength parameter only
Show answer
Answer: B. external determinacy in a planar rigid bodyThe statement describes external determinacy in a planar rigid body.
Report a mistake

Q47. Which statement best describes stable determinacy assessment?

  1. Arequires all joints to be rigid
  2. Brequires considering both restraint count and geometric arrangement
  3. Cdepends only on number of members
  4. Dignores support directions
Show answer
Answer: B. requires considering both restraint count and geometric arrangementIn structural analysis, stable determinacy assessment is correctly described as follows: requires considering both restraint count and geometric arrangement.
Report a mistake

Q48. Which concept is associated with the statement: “requires considering both restraint count and geometric arrangement”?

  1. Astable determinacy assessment
  2. Ba quantity unrelated to this topic
  3. Ca material-strength parameter only
  4. Da drafting convention only
Show answer
Answer: A. stable determinacy assessmentThe statement describes stable determinacy assessment.
Report a mistake

Q49. Which statement best describes indeterminate analysis?

  1. Auses equilibrium together with compatibility and force-deformation relations
  2. Buses equilibrium only
  3. Cdoes not require stiffness information
  4. Dcannot be performed for beams
Show answer
Answer: A. uses equilibrium together with compatibility and force-deformation relationsIn structural analysis, indeterminate analysis is correctly described as follows: uses equilibrium together with compatibility and force-deformation relations.
Report a mistake

Q50. Which concept is associated with the statement: “uses equilibrium together with compatibility and force-deformation relations”?

  1. Aa material-strength parameter only
  2. Ba drafting convention only
  3. Cindeterminate analysis
  4. Da quantity unrelated to this topic
Show answer
Answer: C. indeterminate analysisThe statement describes indeterminate analysis.
Report a mistake